• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• IE interfaces
• /
• v.13 no.2
• /
• pp.178-187
• /
• 2000

In this paper, we investigate the system performance when the voice traffic is constructed as the ATM Adaptation Layer type 2(AAL-2) and then it is transmitted to the Base Station Controller(BSC) from the Base Station Transceiver Subsystem(BTS) through El link in International Mobile Telecommunication-2000 (IMT-2000) network. For this purpose, we first briefly describe the architecture of the BTS and the BSC, and then model it as a queueing network. By simulation study, we present the required processing time at traffic control blocks and the timeout time which should be set for multiplexing the user packets in the LIU(Line Interface Unit). Further, we evaluate the performance of physical links and the timeout probability that user packets can not be multiplexed within the established timeout time, and the multiplexing gain. Finally, we present the number of voice users who can be simultaneously admitted on one El link and 99.9% value of the transmission delay from the Radio Channel Element(RCE) to the Selector & Transcoder Subsystem(STS).

• Electronics and Telecommunications Trends
• /
• v.36 no.4
• /
• pp.72-80
• /
• 2021

Multimedia broadcast multicast services (MBMS) have evolved to accommodate broadcasting services in 3GPP standards. One long-standing approach is to comprise the multimedia broadcast multicast service single-frequency network based on the cellular networks of mobile operators, and another approach adds a broadcasting network to 3GPP standards. In this paper, we overview the MBMS architecture and key entities in MBMS services. In addition, the trends of MBMS are discussed in terms of technology and 3GPP standards, where MBMS functionality is described according to 3GPP releases. Finally, we discuss its capability through a comparison with ATSC 3.0, which is the latest terrestrial broadcasting standard, and then we present the current status and future perspectives of MBMS in 3GPP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.810-816
• /
• 2007

A security robot system named EGIS-SR is a mobile security robot through one of the new growth engine project in robotic industries. It allows home surveillance through an autonomous mobile platform using onboard cameras and wireless security sensors. EGIS-SR has many sensors to allow autonomous navigation, hierarchical control architecture to handle lots of situations in monitoring home surveillance and mighty networks to achieve unmanned security services. EGIS-SR is tightly coupled with a networked security environment, where the information of the robot is remotely connected with the remote cockpit and patrol man. It achieved an intelligent unmanned security service. The robot is a two-wheeled mobile robot and has casters and suspension to overcome a doorsill. The dynamic motion is verified through $ADAMS^{TM}$ simulation. For the main controller, PXA270 based hardware platform based on linux kernel 2.6 is developed. In the linux platform, data handling for various sensors and the localization algorithm are performed. Also, a local path planning algorithm for object avoidance with ultrasonic sensors and localization using $StarGazer^{TM}$ is developed. Finally, for the automatic charging, a docking algorithm with infrared ray system is implemented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5301-5323
• /
• 2017

Small cell deployment offers a low-cost solution for the boosted traffic demand in heterogeneous cellular networks (HCNs). Besides improved spatial spectrum efficiency and energy efficiency, future HCNs are also featured with the trend of network architecture convergence and feasibility for flexible mobile applications. To achieve these goals, dual connectivity (DC) is playing a more and more important role to support control/user-plane splitting, which enables maintaining fixed control channel connections for reliability. In this paper, we develop a tractable framework for the downlink SINR analysis of DC assisted HCN. Based on stochastic geometry model, the data-control joint coverage probabilities under multi-frequency and single-frequency tiering are derived, which involve quick integrals and admit simple closed-forms in special cases. Monte Carlo simulations confirm the accuracy of the expressions. It is observed that the increase in mobility robustness of DC is at the price of control channel SINR degradation. This degradation severely worsens the joint coverage performance under single-frequency tiering, proving multi-frequency tiering a more feasible networking scheme to utilize the advantage of DC effectively. Moreover, the joint coverage probability can be maximized by adjusting the density ratio of small cell and macro cell eNBs under multi-frequency tiering, though changing cell association bias has little impact on the level of the maximal coverage performance.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.9-19
• /
• 2008

This paper propose the issue of connecting nested NEMO (Network Nobility) networks to global IPv6 networks, while supporting IPv6 mobility. Specifically, we consider a self-addressing including topology information IPv6-enabled NEMO infrastructure. The proposed self-organization addressing protocol automatically organized mobile routers into free architecture and configuration their global IPv6 addresses. BU(binding update) to MR own HA and internal rouging, hosed on longest prefix matching and soft state routing cache, are specially designed for IPv6-based NEMO. In conclusion, numeric analysis ore conducted to show more efficiency of the proposed routing protocols than other RO (Route Optimization) approaches.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.15-26
• /
• 2013

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Because of the energy inefficiency of networks-based mobility management protocols can be supported in IP-WSN. In this paper we propose a network based mobility supported IP-WSN protocol called Multicasting-based inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks (mSFP). Based on [8,20], We present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1023-1026
• /
• 2005

In the ubiquitous computing environment, an intelligent vehicle is defined as a sensor node with a capability of intelligence and communication in a wire and wireless network space. To make it real, a lot of problems should be addressed in the aspect of vehicle mobility, in-vehicle communication, common service platform and the connection of heterogeneous networks to provide a driver with several intelligent information services beyond the time and space. In this paper, we present an intelligent information system for managing in-vehicle sensor network and a vehicle gateway for connecting the external networks. The in-vehicle sensor network connected with several sensor nodes is used to collect sensor data and control the vehicle based on CAN protocol. Each sensor node is equipped with a reusable modular node architecture, which contains a common CAN stack, a message manager and an event handler. The vehicle gateway makes vehicle control and diagnosis from a remote host possible by connecting the in-vehicle sensor network with an external network. Specifically, it gives an access to the external mobile communication network such as CDMA. Some experiments was made to find out how long it takes to communicate between a vehicle's intelligent information system and an external server in the various environment. The results show that the average response time amounts to 776ms at fixed place, 707ms at rural area and 910ms at urban area.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.1
• /
• pp.55-67
• /
• 2023

Lightweight face recognition models, as one of the most popular and long-standing topics in the field of computer vision, has achieved vigorous development and has been widely used in many real-world applications due to fewer number of parameters, lower floating-point operations, and smaller model size. However, few surveys reviewed lightweight models and reimplemented these lightweight models by using the same calculating resource and training dataset. In this survey article, we present a comprehensive review about the recent research advances on the end-to-end efficient lightweight face recognition models and reimplement several of the most popular models. To start with, we introduce the overview of face recognition with lightweight models. Then, based on the construction of models, we categorize the lightweight models into: (1) artificially designing lightweight FR models, (2) pruned models to face recognition, (3) efficient automatic neural network architecture design based on neural architecture searching, (4) Knowledge distillation and (5) low-rank decomposition. As an example, we also introduce the SqueezeFaceNet and EfficientFaceNet by pruning SqueezeNet and EfficientNet. Additionally, we reimplement and present a detailed performance comparison of different lightweight models on the nine different test benchmarks. At last, the challenges and future works are provided. There are three main contributions in our survey: firstly, the categorized lightweight models can be conveniently identified so that we can explore new lightweight models for face recognition; secondly, the comprehensive performance comparisons are carried out so that ones can choose models when a state-of-the-art end-to-end face recognition system is deployed on mobile devices; thirdly, the challenges and future trends are stated to inspire our future works.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.199-208
• /
• 2005

In this thesis, we have proposed an extended resource management mechanism that optimizes the QoS of multimedia service by complementing the existing resource management mechanism used in IP networks. The proposed resource management mechanism is composed of traffic Scheduler which was designed based on statistic analysis of the distribution of user traffic occurrence, Traffic Monitor Unit, Bandwidth Allocation Unit, queue Controller, and Traffic Classifier In order to confirm the validity of the proposed resource management mechanism, its performance was analyzed by using computer simulation. As a result of performance analysis, its availability was proved.