• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1593-1600
• /
• 2009

There are two major algorithms to find a square root of floating point number, one is the Newton_Raphson algorithm and GoldSchmidt algorithm which calculate it approximately by iterating multiplications and the other is SRT algorithm which calculates it exactly by iterating subtractions. This paper proposes an exact floating point square root algorithm using only multiplication. At first an approximate inverse square root is calculated by Newton_Raphson algorithm, and then an exact square root algorithm by reducing an error in it and a compensation algorithm of it are proposed. The proposed algorithm is verified to calculate all of numbers in a single precision floating point number and 1 billion random numbers in a double precision floating point number. The proposed algorithm requires only the multipliers without another hardware, so it can be widely used in an embedded system and mobile production which requires an efact square root of floating point number.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1306-1312
• /
• 2017

The route request (RREQ) packet is selectively re-broadcasted in the routing protocols that improve the broadcast storm problem of the ad-hoc on-demand routing protocol (AODV). However, in a low node density scenario, the connectivity of these selective rebroadcast schemes becomes less than that of the AODV. In order to clarify the requirements of these selective re-broadcast routing protocols, it is necessary to investigate the relationship between the node density and the connectivity. In this paper, we drive a probability to preserve the connectivity of the GAODV at an intermediate rebroadcast node. In addition, we present an intuitive method to approximate the end-to-end connectivity of the GAODV. We draw the required node density to guarantee the connectivity of 0.9 and 0.99 through computer simulations, and verify the validity of the derived theoritical connectivity by comparing with the simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1393-1400
• /
• 2017

As the number of smartphone users increases, vulnerability to privacy protection is increasing. This is because personal information is stored on various servers connected to the Internet and the user is authenticated using the same ID and password. Authentication methods such as OTP, FIDO, and PIN codes have been introduced to solve traditional authentication methods, but their use is limited for authentication that requires sharing with other users. In this paper, we propose the authentication method that is needed for the management of shared information such as hospitals and corporations. The proposed algorithm is an algorithm that can authenticate users in the same place in real time using smart phone IMEI, QR code, BLE, push message. We propose an authentication algorithm that can perform user authentication through mutual cooperation using a smart phone and can cancel realtime authentication. And we designed and implemented a mutual authentication system using proposed algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2871-2877
• /
• 2015

Shopping patterns are changing with the emergence of SNS. Recently, it is also interested in providing the information based on the users' needs. Generally, the provided information is obtained from the history of users' simple browsing. Best selling hot item list is also provided in order to reflect the preferences of public users. However, the provided information is irrelevant to an individual preference. In this paper, we propose a method to utilize inner and outer SNS for analyzing public preferences about goods which are interested by individual users. The inner analyzing module collects and analyzes the preferences of community members about two goods designated by individual users. The outer analyzing module supports to analyze public preferences by using the tweeter SNS. The results of implementation show that it is possible to recommend goods based on the individual users' preferences unlike the existing shopping mall.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.244-251
• /
• 2003

As the Internet and wireless mobile communication is being widespread, the WAP (Wireless Application Protocol) that merges these two technologies has emerged. Also, the research of the WAP gateway that enables efficient processing of multiple user demands concurrently and prompt response to requests from various wireless devices has been performed in many working groups. The WAP stack is the most fundamental technology among these researches. In this paper, we implement the WAP container utilizing the JAVA's multithreading and applying to the connection pooling technique to manage the available resource in the container efficiently. Also, we design and implement the WTP(Wireless Transaction Protocol) layer and the UDP(User Datagram Protocol) layer based on the priority Policy. Our design and implementation showed the shorter waiting time than that of the existing FCFS(First-Come, First-Served) system in the transaction layer and its efficiency was proved through simulation.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.204-209
• /
• 2003

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area, optimized selection of base station, and cell design, etc. In the stage of these analyses, we have to present the propagation prediction model which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area. In addition we need to perform an analysis of the conventional model which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable correctness.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.231-239
• /
• 2018

This study will analyze the meaning and the characteristic of advertising system in Facebook, one of the leading social platforms. This study focuses on finding the trend of mobile advertisement and observing Facebook users behavior. During 30seconds, the researcher observed the behaviors of 50 male and female university students which they access and use their own Facebook individually. After the observation, the researcher did an in-depth analysis based on offline discussion with tested participants. As a result, it can be classified in positive causes and negative causes of the advertisement. There are 3 positive causes; native advertisement effect, acquaintance effect, and big data effect and they help people watch the advertisement positively. 1.5-3 times per second high speed scroll behavior (Finger effect) is the main negative cause and it help users escape from the advertisement easily. These positive and negative causes have an interactive synergy which reduces user stress and makes people enjoy ad more than other media. Finally, both of them cause making Facebook a better environment for the advertisement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1193-1200
• /
• 2008

This paper describes a developed 5Watt power amplifier module fer mobile communication system using Gallium Nitride (GaN) devices. Three amplification stages such as pre-amplifier, driver amplifier, and power amplifier have been fabricated and measured separately in advance for incorporating the total power amplifier module and estimating the performances. In addition, a defected ground structure is combined with the output stage of the power amplifier module for improving harmonic rejection and adjacent channel power (ACP) characteristics. The measured performances of the GaN power amplifier module include 58dB,min of gain, 37dBm,min of output power, 50dBc,min of harmonic rejection, 35dBc,min of IMD3 for 2-tone input, and 35dBc,min of ACP at 2.1GHz frequency band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.519-526
• /
• 2002

In this paper, a microstrip patch array antenna for a Doppler radar at 10.525GHz is desinged and fabricated. To be used for mobile radar system, the antenna is fabricated on a single layer laminate to resist a fire impact and is covered with the Teflon foam. To obtain the desired characteristics, the array antenna is designed 4$\times$8 array using a corporate 3-dB amplitude taper. Also, using square patch elements, the antenna can be converted to a circular polarized antenna later. The designed and fabricated array antenna has the reflection coefficient$({S_11})$ -53.498dB, the horizontal beam width of $10^{\circ}$, the vertical beam width of $18.8^{\circ}$, the gain of 21dBi, the bandwidth of 220MHz for VSWR<1.5 and a side lobe level of less than -17.5dB.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.