• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.475-482
• /
• 2007

Mobile nodes in ad-hoc wireless networks play roles of router as well as host. Movement of nodes causes network topology changes, which make existing routing information be modified. Therefore many routing protocols for ad-hoc networks were suggested in the literature. In this paper, we suggest an enhanced automatic route shortening method for dynamic source routing(DSR) protocol. DSR is a request/response based protocol which has low routing overhead owing to node movement. The current automatic route shortening is performed on the only nodes which belong to the source route of packets. On the contrary, our suggested method allows all neighbor nodes hearing the packet to participate in automatic route shortening. It makes all possible route shortenings be performed. So we maintain maximal shortened routes of ongoing data connections. Simulation results with ns2 show that our method pays small extra protocol overhead for ARS, but increases the ratio of successful packet transmissions and the number of ARSs performed in our mechanism is from 2 to 5 times higher than in original ARS mechanism and therefore it will improve the network-wide energy consumption in wireless ad-hoc networks.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.286-288
• /
• 2004

소스 호스트와 목적지 호스트간 경유 경로를 패킷 헤더에 모두 포함하는 DSR(Dynamic Source Routing)은 경유 호스트 수 증가에 비례 칠서 패킷 헤더와 개별 호스트들이 유지하는 라우트 캐쉬의 크기가 커져야 한다. 따라서 경로 크기와 선형적 관계로 유발되는 확장성 문제로 DSR을 수천 개 이상의 호스트로 구성 되는 대규모 애드-혹 망에 적용하기 어렵다. IETF(Internet Engineering Task Force)는 이러한 단점의 회피 방법으로 Flow State 메카니즘을 제안 하고 있다. 그러나 이 방법은 Route Discovery를 위한 Route Request 와 Route Response 패킷에 전체 경로를 포함 해야 하는 것은 물론 Route Cache에도 전체 경로를 저장 해야 하기 때문에 DSR 확장성 문제를 해결 할 수 없다. 본 논문에서는 경로 크기에 비례해 증가하는 DSR의 오버헤드를 패킷 헤더는 6-hoP, 라우트 캐쉬는 12-hoP 크기로 한정 하는 경로 분할 라우팅 방법을 제안한다.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.3
• /
• pp.142-152
• /
• 2014

Vehicular Ad-hoc Networks (VANETs) are comprised of wireless mobile nodes characterized by a randomly changing topology, high mobility, availability of geographic position, and fewer power constraints. Orthogonal Frequency Division Multiplexing (OFDM) is a promising candidate for the physical layer of VANET because of the inherent characteristics of the spectral efficiency and robustness to channel impairments. The susceptibility of OFDM to Inter-Carrier Interference (ICI) is a challenging issue. The high mobility of nodes in VANET causes higher Doppler shifts, which results in ICI in the OFDM system. In this paper, a frequency domain com-btype channel estimation was used to cancel out ICI. The channel frequency response at the pilot tones was estimated using a Least Square (LS) estimator. An efficient interpolation technique is required to estimate the channel at the data tones with low interpolation error. This paper proposes a robust interpolation technique to estimate the channel frequency response at the data subcarriers. The channel induced noise tended to degrade the Bit Error Rate (BER) performance of the system. Parallel concatenated Convolutional codes were used for error correction. At the decoding end, different decoding algorithms were considered for the component decoders of the iterative Turbo decoder. A performance and complexity comparison among the various decoding algorithms was also carried out.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.9-16
• /
• 2011

This paper represents an interworking architecture for keeping the VLC audio quality between Worldwide Interoperability for Microwave Access (WiMAX) and IEEE 802.11 Mobile Ad hoc Network (MANET) where both mobile routers and mobile nodes are moving dynamically. Systematic performance analysis on the interworking architecture has been conducted by using OPNET simulator to show the results such as Packet Delivery Ratio (PDR) and throughput. Based on simulation results, when the number of MANET nodes is small, PDR remains relatively stable even though data packets increase. However, with the many MANET nodes, PDR decreases as data traffic increases. Throughput is affected by the number of MANET nodes. Especially when the MANET node density has increased further, throughput is much higher, but it is not affected by the mobility speed. However, FTP download and upload response time is not affected much by both the number of MANET nodes and the mobility speed.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.238-245
• /
• 2016

There are technological, operational and environmental constraints at tactical edge, which are disconnected operation, intermittent connectivity, and limited bandwidth (DIL), size, weight and power (SWaP) limitations, ad-hoc and mobile network, and so on. To overcome these limitations and constraints, we use service-oriented architecture (SOA) based technologies. Moreover, the operation environment is highly dynamic: requirements change in response to the emerging situation, and the availability of resources needs to be updated constantly due to the factors such as technical failures. In order to use appropriate resources at the right time according to the mission, it needs to find the best resources. In this context, we identify ontology-based mission service model including mission, task, service, and resource, and develop capability-based matching in tactical edge environment. The goal of this paper is to propose a capability-based semantic matching for dynamic resource allocation. The contributions of this paper are i) military domain ontologies ii) semantic matching using ontology relationship; and (iii) the capability-based matching for the mission service model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.145-153
• /
• 2018

SSL (Secure Socket Layer) and TLS (Transport Layer Security) are widely used protocols for secure and encrypted communication over a computer network. However, there have been reported several security vulnerabilities of SSL/TLS over the years. The vulnerabilities can let an adversary carry out critical attacks on SSL/TLS enabled servers. In this paper, we have developed a system which can periodically scan SSL/TLS vulnerabilities on internal network servers and quickly detects, reports and visualizes the vulnerabilities. We have evaluated the system on working servers of Naver services and analyzed detected vulnerabilities. 816 vulnerabilities are found on 213 internal server domains (4.2 vulnerabilities on average) and most vulnerable servers are not opened to public. However, 46 server domains have old vulnerabilites which were found 2016. We could patch and response to SSL/TLS vulnerabilites of servers by leveraging the proposed system.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.156-167
• /
• 2021

In this paper, we propose a digital transceiver unit design for in-building of 5G optical repeaters that extends the coverage of 5G mobile communication network services and connects to a stable wireless network in a building. The digital transceiver unit for driving the proposed 5G optical repeater is composed of 4 blocks: a signal processing unit, an RF transceiver unit, an optical input/output unit, and a clock generation unit. The signal processing unit plays an important role, such as a combination of a basic operation of the CPRI interface, a 4-channel antenna signal, and response to external control commands. It also transmits and receives high-quality IQ data through the JESD204B interface. CFR and DPD blocks operate to protect the power amplifier. The RF transmitter/receiver converts the RF signal received from the antenna to AD, is transmitted to the signal processing unit through the JESD204B interface, and DA converts the digital signal transmitted from the signal processing unit to the JESD204B interface and transmits the RF signal to the antenna. The optical input/output unit converts an electric signal into an optical signal and transmits it, and converts the optical signal into an electric signal and receives it. The clock generator suppresses jitter of the synchronous clock supplied from the CPRI interface of the optical input/output unit, and supplies a stable synchronous clock to the signal processing unit and the RF transceiver. Before CPRI connection, a local clock is supplied to operate in a CPRI connection ready state. XCZU9CG-2FFVC900I of Xilinx's MPSoC series was used to evaluate the accuracy of the digital transceiver unit for driving the 5G optical repeater proposed in this paper, and Vivado 2018.3 was used as the design tool. The 5G optical repeater digital transceiver unit proposed in this paper converts the 5G RF signal input to the ADC into digital and transmits it to the JIG through CPRI and outputs the downlink data signal received from the JIG through the CPRI to the DAC. And evaluated the performance. The experimental results showed that flatness, Return Loss, Channel Power, ACLR, EVM, Frequency Error, etc. exceeded the target set value.