• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.77-78
• /
• 2008

ZnO thin films were deposited on glass substrates by pulsed laser deposition (PLD) at various oxygen pressures. We observed structural, electrical and optical properties of ZnO films. Structural properties were analysed by XRD and FE-SEM. Electrical properties for applications of transparent thin film transistors (TTFTs) were measured by hall measurement using van der pauw methods at room temperature. In order to apply in transparent devices, we measured transmittance, and optical bandgap energy was calculated by Tauc's equation. The results showed that ZnO films deposited at 200mTorr oxygen pressure were applicable to channel layers of transparent TFTs. It had high hall mobilities ($52.92cm^2$/V-s) and suitable transmittance at visible wavelength region (above 80%).

• 수산해양기술연구
• /
• 제21권2호
• /
• pp.89-98
• /
• 1985

As a primary step in studying the effects of the netting porosity on the net-shape in the four-seam trawling net, a series of experiments were performed changing the porosity of each panel, with the simplified mo:iel of the bag net made of porous vinyl film and that ma:ie of net webbing. These models were suspended horizontally in circularly flowing water, with two pairs of susp~nding threais to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two load cells in circularly flowing water. From the results, the auther estimated an experimental equation from the relationship between the porosity of each panel in the bag net and the section shape of the bag mouth, h/w=k (l-Pr_u/lPr_s)

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.108-113
• /
• 2013

$CuInSe_2$(CIS) chalcopyrite 물질은 고효율 박막 태양전지를 위한 광흡수층의 물질로 매우 잘 알려져 있다. 최근 태양광 산업의 흐름은 안정적인 재료 개발과 가격 경쟁력 있는 태양전지를 위한 효율적인 제조 공정을 일치시키는 것이다. 저가의 CIS 광흡수층 위해 다양한 방법으로 제조를 시도하였고, 본 논문에서는 CIS 광흡수층을 저가형으로 제조를 위해 상용화되는 6 mm pieces를 사용하여 high frequency ball milling과 cryogenic milling을 이용해 CIS 나노입자를 얻었다. 그리고, CIS 광흡수층은 불활성 분위기의 glove box 안에서 milling된 나노입자를 사용하여 paste coating법으로 제조하였다. Chalcopyrite CIS 박막은 기판온도 550도에서 30분간 셀렌화 한 후 성공적으로 제조되었으며, Al/ZnO/CdS/CIS/Mo 구조의 CIS 태양전지는 evaporation, sputtering 및 chemical bath deposition(CBD) 등 다양한 증착 방법으로 각각 제조하였다. 결론적으로, 나노입자를 이용한 CIS 태양전지 전기적 변환효율은 1.74 %를 얻었으며, 개방전압(Voc)는 29 mV, 합선전류밀도(Jsc)는 35 $mA/cm^2$, 그리고 충진율(FF)은 17.2 %였다. 나노입자 CIS 광흡수층은 energy dispersive spectroscopy(EDS), x-ray diffraction(XRD) 그리고 high-resolution scanning electron microscopy(HRSEM) 등으로 특성 분석을 하였다.

• 한국체육학회지인문사회과학편
• /
• 제56권1호
• /
• pp.99-110
• /
• 2017

본 연구의 목적은 영화<60만번의 트라이>의 사회적 파급력에 주목하고 영화 속 재현된 자이니치와 럭비가 지니는 상징과 의미를 살펴봄으로써 영화가 궁극적으로 관객에게 전달하고자 하였던 메시지가 무엇이었는지를 밝히는 것이었다. 연구방법으로는 텍스트 분석을 실시하였다. 연구결과, 영화 속 자이니치는 두 가지의 모습으로 재현되고 있었다. 자이니치들은 일본의 주권권력에 의해 사회내부에 위치하나 외부자로 인정받는 모순적 존재인 호모 사케르로 재현되고 있었다. 또 한편으로 자이니치의 정체성은 분명 한국인임을 드러내고 있었을 뿐만 아니라 일본에서도 인정받는, 능력 있는 자랑스러운 존재로 표현되고 있었다. 영화 속에서 럭비가 지니는 상징적 의미에 대해서는 크게 두 가지가 나타났다. 먼저 영화 속 럭비는 자이니치를 증명할 수 있는 가장 효과적이면서도 강력한 인정투쟁으로 사명과 같은 것이었으며, 또 한편으로 그들이 염원하는 이상사회의 모습을 오롯이 담고 있는 중요한 메시지였던 것이다.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.481-488
• /
• 2022

The Cu₂ZnSn(S_xSe_1-x)₄ (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se₂ (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn²⁺ element with a Cd²⁺element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd²⁺ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (J_sc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd²⁺ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd²⁺ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd²⁺ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, J_sc of 34.0 mA/cm², and fill factor (FF) of 62.7 %, respectively.

• Tribology and Lubricants
• /
• 제19권4호
• /
• pp.203-210
• /
• 2003

In order to enhance the thermal stability of binder materials of bonded type solid lubricants, several metal-alkoxide based sol-gel materials such as methyltrimethoxysilane(MTMOS), titaniumisopropoxide (Ti(Opr$\^$i/)$_4$), zirconiumisopropoxide (Zr(Opr$\^$i/)$_4$) and aluminumbutoxide (Al(Obu$\^$t/)$_4$) were modified chemically by both epoxy and acrylic silane compounds. Friction and wear characteristics of the bonded solid lubricants, whose binders were of several hybrid ceramic materials, were tested with a reciprocating tribo-tester. Wear life was evaluated with respect to the heat-curing temperature, friction temperature, type of supplement lubricants, and ratio of binder materials. Test results showed that the Si-Zr hybrid ceramic materials modified by epoxy-silane compounds had a higher wear life compared to others. Sb$_2$O$_3$ was the most effective supplement lubricants in the high temperature, and BUS analyses revealed that it was caused mainly by a strong anti-oxidation effect to MoS$_2$ particles. The higher heat-curing temperature resulted in the higher wear life, and the higher friction temperature resulted in the lower wear life.

• 접착 및 계면
• /
• 제11권2호
• /
• pp.50-56
• /
• 2010

PET 필름은 핸드폰이나 디스플레이 패널, 노트북 등과 같은 산업전반에 걸쳐 널리 사용 된다. 최근 PET 필름 표면에 부착되는 ITO 표면은 높은 연필 경도와 높은 굴절도 등을 필요로 하기에 본 연구에서는 터치패널용 소자에 쓰이는 PET 필름의 코팅소재로 사용하기 위한 코팅소재를 개발하기 위하여 폐 TNT로부터 추출한 플로로글루시놀(phloroglucinol)을 이용하여 아크릴과 에폭시 형태의 다관능성 모노머를 합성하였다. 다관능성 모노머는 $^1H$ NMR과 FT-IR을 이용하여 구조확인을 하였으며, 다관능성 모노머의 화학구조에 따른 광굴절도, 광투과도, 그리고 표면 경도를 평가하였다. 합성된 다관능성 모노머는 연필 경도 1~3 H의 높은 특성을 나타내었으며, 광굴절도는 1.54~1.57, 광투과도는 93% 이상을 나타내었다.

• 대한전자공학회논문지SD
• /
• 제38권2호
• /
• pp.114-121
• /
• 2001

능동제어형 전계방출 디스플레이의 전자공급원으로서 능동제어형 전계 에미터 어레이의 회로모델이 제안되었다. 능동제어형 전계 에미터 어레이는 전계방출을 안정화시키고 저전력구동을 위한 수소화 된 비정질 실리콘 박막 트랜지스터와 Spindt형 Mo 전계 에미터 어레이로 구성되었고 같은 유리기판 위에 제작되었다. 비정질 박막 트랜지스터와 Spindt형 Mo 전계 에미터 어레이의 전기적 특성으로부터 추출된 기본 모델 변수는 제안된 능동제어형 전계 에미터 어레이 회로모델에 입력되었고 SPICE 회로 시뮬레이터를 사용하여 특성을 분석하였다. 제작된 소자의 측정값과 DC 시뮬레이션 결과를 비교한 결과 두 값이 상당히 일치함으로써 등가회로 모델의 정확성을 확인하였다. 또한 제작된 소자의 transient 시뮬레이션 결과 전계 에미터 어레이의 게이트 커패시턴스와 TFT의 구동능력이 반응시간에 가장 크게 영향을 끼치고 있음을 확인하였다. 제작된 능동제어형 전계방출 에미터 어레이는 pulse width modulation으로 구동하는 경우 15㎲의 반응시간을 얻었고 이 값으로는 4bit/color의 계조(gray scale)표현이 가능하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.66-79
• /
• 2008

Several oxides have recently been reported to have resistance-switching characteristics for nonvolatile memory (NVM) applications. Both binary and ternary oxides demonstrated great potential as resistive-switching memory elements. However, the switching mechanisms have not yet been clearly understood, and the uniformity and reproducibility of devices have not been sufficient for gigabit-NVM applications. The primary requirements for oxides in memory applications are scalability, fast switching speed, good memory retention, a reasonable resistive window, and constant working voltage. In this paper, we discuss several materials that are resistive-switching elements and also focus on their switching mechanisms. We evaluated non-stoichiometric polycrystalline oxides ($Nb_2O_5$, and $ZrO_x$) and subsequently the resistive switching of $Cu_xO$ and heavily Cu-doped $MoO_x$ film for their compatibility with modem transistor-process cycles. Single-crystalline Nb-doped $SrTiO_3$ (NbSTO) was also investigated, and we found a Pt/single-crystal NbSTO Schottky junction had excellent memory characteristics. Epitaxial NbSTO film was grown on an Si substrate using conducting TiN as a buffer layer to introduce single-crystal NbSTO into the CMOS process and preserve its excellent electrical characteristics.

• Tribology and Lubricants
• /
• 제31권4호
• /
• pp.183-188
• /
• 2015

This paper presents the experimental effects of lubricant with nanodiamond particles in sliding friction. In order to improve the performance of lubricants many additives are used, such as MoS₂, cadmium chloride, indium, sulfides, and phosphides. These additives are harmful to human health and to the environment, so alternatives are necessary. One such alternative is nanodiamond powder, which has a large surface area. In order to investigate the effect of nanodiamonds in lubricants under sliding friction, they are dispersed in the lubricant at a variety of concentrations (0 wt%, 0.1 wt%, 0.3 wt%, 0.5 wt%, and 1 wt%) using the matrix synthesis method. Friction and wear tests are performed according to the ASTM G99 method using a pin-on-disc tester at room temperature. The specimens used in this experiment are AISI 52100 ball bearings and AISI 1020 steel discs. During the test, lubricant mixed with nanodiamond is supplied constantly to keep the two bodies separated by a lubricant film. To maintain boundary lubrication, the speed is set to 0.18 m/s and a load of 294 N is applied to the disc through the pin. Results are recorded by using workbench software over the test duration of 10 minutes. Experimental results show that when the concentration of nanodiamond increases, the coefficient of friction decreases. However, above a nanodiamond concentration of 0.5 wt%, both the coefficient of friction and wear volume increase. From this experiment, the optimum concentration of nanodiamond showing a minimum coefficient of friction of 0.09 and minimum wear volume of 0.82 nm² was 0.5 wt%.