• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.406-413
• /
• 2000

The friction and wear behaviors of Magnetron Sputtered MoS$_2$films were investigated by using a pin on disk type tester which was designed and manufactured for this experiment. The experiment was conducted by using silicon nitride (Si$_3$N$_4$) as a pin material and Magnetron Sputtered MoS$_2$on bearing steel (STB2) as a disk material, under operating conditions that include different surface roughness (Polishing specimen, Grinding specimen)(2types), linear sliding velocities in the range of 22, 44, 66mm/sec (3types), normal loads vary from 9.8N, 19.6N, 29.4N(3types), corresponding to contact pressures of 1.9∼2.7GPa and atmospheric conditions of high vacuum( 1.3${\times}$10$\^$-4/Pa), medium vacuum( 1.3${\times}$10$\^$-l/Pa), ambient air(10$\^$5/Pa)(3types). We investigated fracture mechanism in magnetron sputtered MoS$_2$films with Magnetron Sputtering method in each experiment.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.291-295
• /
• 2019

BACKGROUND: Mixed cropping of hairy vetch and Barley is widely used as a green manure for reducing chemical fertilizers while maintaining soil fertility in paddy soil. We investigated the effect of Molybdenum (Mo) fertilizer on vetch N₂ fixation, biomass production and transfer N from vetch to barley under a hairy vetch-barley mixed cropping system. METHODS AND RESULTS: The barley and hairy vetch were sowed at a rate of 135 and 23 kg/ha, respectively, without chemical fertilizer application but with Mo fertilizer at 0, 0.5, 1.0, 2.0, and 4.0 kg/ha as a treatment. The percentage of hairy vetch N derived from air N₂ fixation (%Ndfa) and N transfer from hairy vetch to barley (%Ndfv) was determined by the ¹⁵N natural abundance method. Although application of Mo at 2.0 kg/ha significantly increased biomass of both barley and hairy vetch, the biomass was decreased at application of Mo 4.0 kg/ha. At the application of Mo 2.0 kg/ha, the percentage of Ndfa and Ndfv was 81.7 and 53.9, respectively, which are significantly higher than that of the treatments without Mo. CONCLUSION: These results highlight that application of Mo fertilizer can be an effective measures to improve N fixation in hairy vetch and biomass production in both barley and hairy vetch.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1463-1482
• /
• 2002

Partially doped Aurivillius phases SrBi2N$b_{2-x}M_xO_9$ (M=Cr and Mo) were successfully synthesized and characterized. The extent of the substitution was limited at ~20 mole % because of the size differences between $Nb^{5+}$ and $Cr^{6+}$, and between $Nb^{5+}$ and $Mo^{6+}$. When the amount of substitution exceeded ~20 mole%, the phases began to collapse and the second phases were made. The dielectric constants of substituted compounds were enlarged nevertheless Cr or Mo is substituted. The increment is bigger in the Mo substituted compound than in the Cr doped one although the Nb(Cr)$O_6$ octahedra could be more strongly distorted than the Nb(Mo)$O_6$ octahedra since the ionic size difference between $Nb^{5+}$ and of $Cr^{6+}$ is much bigger than that between $Nb^{5+}$ and $Mo^{6+}$. Consequently, the dielectric constant of the substituted Aurivillius phase $Bi_2$A_{n-1}B_{n-x}M_xO_{3n+1}$$ depends on the extent of distortion of the B$O_6$ octahedra and more strongly on the polarizability of the metal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1773-1780
• /
• 2018

Objective: This study was to evaluate effects of mixed plant oils (identified as mixed oil 1 [MO1] and mixed oil 2 [MO2]) on performance, serum composition, viscera percentages, meat quality, and fatty acid deposition of broilers. Methods: A total of 126 one-day-old Arbor Acres male broiler chicks (weighing $44.91{\pm}0.92g$) were randomly allocated to 1 of 3 treatments with 7 replicate pens per treatment (6 broilers per pen). Dietary treatments included a corn-soybean basal diet supplemented with 3% soybean oil (CTR), basal diet with 3% MO1 (a mixture of 15% corn oil, 10% coconut oil, 15% linseed oil, 20% palm oil, 15% peanut oil and 25% soybean oil; MO1), or basal diet with 3% MO2 (a combination of 50% MO1 and 50% extruded corn; MO2). The trial consisted of phase 1 (d 1 to 21) and phase 2 (d 22 to 42). Results: Compared to CTR, broilers fed MO (MO1 or MO2) had greater (p<0.05) average daily gain in phase 1, 2, and overall (d 1 to 42), redness in thigh muscle, concentrations of serum glucose, serum albumin, saturated fatty acids (SFA) and n-6/n-3 polyunsaturated fatty acids (PUFA) ratio in breast muscle, while these broilers also showed lower ($p{\leq}0.05$) drip loss and concentrations of C18:3n-3 and PUFA/SFA ratio in breast muscle. Broilers fed MO2 had higher (p<0.05) liver percentage, while broilers fed MO1 had lower ($p{\leq}0.05$) feed conversion ratio in phase 1 and increased (p<0.05) contents of C18:2n-6, C20:5n-3, C22:6n-3, and n-3 PUFA in breast muscle compared to CTR. Conclusion: Mixed plant oils had positive effects on performance, serum parameters, meat quality, liver percentage and fatty acid deposition in broilers, which indicates they can be used as better dietary energy feedstocks than soybean oil alone.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.135-136
• /
• 2002

Molybdenum Nitrided (MoNx) films were deposited by DC planar magnetron sputtering. Silicon wafers and real nitrided stainless steel piston rings are employed as substrates. 12 different combinations of nitrogen and argon partial pressure, from 1:7 to 7:1, were applied to deposit MoNx films. X-ray diffraction (XRD) was used to determine the phase structures of films. When nitrogen vs. argon partial pressure is 1:7, the film is mainly $Mo_2N$ phase. With increase of nitrogen partial pressure, MoN phase emerges, but $Mo_2N$ phase still exists. Composition analysis with atomic emission spectrometry (AES) also agreed with this. The films have very high nanohardness (max 2400Hv) and good adhesion to the substrates.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.2
• /
• pp.140-146
• /
• 1993

CoMo, NiMo/ZSM-5 catalysts were prepared at Si/Al ratios of 100, 200 and characterized by TGA, XRD and SEM. Simultaneous hydrocracking of n-heptane and hydrodesulfurization of DBT were studied over these catalysts at the ranges of temparatures between 400$^\circ$C and 500$^\circ$C, pressure of 30 $\times 10^5$ Pa and contact time of 0.02g cat. hr/ml feed in a fixed bed flow reactor. It was shown that the hydrocracking activity of n-heptane increased in the order of NM 100, CM 100, NM 200 and CM 200 catalysts. It was also shown that the Hydrodesulfurization activity of DBT increased in the order of CM 200, NM 200, CM 100 and NM 100 catalysts and these results were thought to be that the increase of acidity of catalysts might increase hydrocracking activity of these catalysts but deactive those simultaneously. In this study it was shown that CM 100 and NM 200 were active catalysts in simultaneous hydrodesulfurization of DBT and hydrocracking of n-heptane reactions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.258-259
• /
• 2014

이산화티타늄($TiO_2$)의 띠 간격 (Band-Gap) 에너지를, 자외선 영역에서 질소와 $Ag-PbMoO_4$를 이용하여 가시광 응답형 광촉매를 제조하기 위하여 실험하였다. 이와 함께 제조한 "$AgPbMoO_4+N-TiO_2$"가 $TiO_2$, $N-TiO_2$, $PbMoO_4$, $AgPbMoO_4$에 비해 에너지 흡수 파장대의 향상을 확인하고 XRD, XPS, FE-SEM, UV-vis-DRS diffuse reflectance spectroscopy 분석을 통해 특성평가 및 분말의 광촉매 활성을 염료의 광촉매 분해반응으로 규명하였다.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.32-33
• /
• 2005

• Korean Journal of Metals and Materials
• /
• v.50 no.8
• /
• pp.549-556
• /
• 2012

The tribological behavior of CrMoN films with respect to surface chemistry was investigated by using X-ray photoelectron spectroscopy (XPS). All of the films were prepared from a hybrid PVD system consisting of DC unbalanced magnetron (UBM) sputtering and arc ion plating (AIP) sources. The tribological property of the films was evaluated by a friction coefficient using a Ball-on-disk type tribometer. The chemistry of wear track was analyzed by energy dispersive spectroscopy (EDS) and XPS. The friction coefficient was measured to be 0.4 for the CrMoN film, which is lower than that of a monolithic CrN film. EDS and XPS results imply the formation of an oxide layer on the coating surface, which was identified as molybdenum oxide phases, known to be a solid lubricant during the wear test.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.150-155
• /
• 1999

The Electrochemical stabilities of the Brewer-Engel type intermetallic compounds of Co-Mo $(35 wt\%)$ and Ni-Mo$(35 wt\%)$ manufactured by the arc-melting method for the hydrogen electrode of $H_2-O_2$ alkaline fuel cell were investigated. Effects of temperature and concentration on the electrochemical behavior of the electrodes in the $80^{\circ}C$ 6 N KOH solution deaerated with $N_2$ gas were studied by electrochemical methods. The effect of overpotential on the electrochemical stabilities of Co-Mo and Ni-Mo intermetallic compounds was also discussed under the normal operation condition of AFC. It was shown that Co-Mo electrode had lower electrochemical stability as compared to Ni-Mo. In the case of Co-Mo electrode, a simultaneous dissolution of cobalt and molybdenum has occurred at low anodic overpotential form equilibrium hydrogen electrode potential, but the dissolution of cobalt was serious, and Co(OH)l layer on the electrode surface formed at the high anodic overpotential. In contrast the Ni-Mo electrode had high electrochemical stability because formation of the dense and thin protective $Ni(OH)_2$ layer prevented the dissolution of molybdenum.