• Mineral and Industry
• /
• v.26
• /
• pp.22-31
• /
• 2013

KIGAM and MRAM (Mineral Resources Authority of Mongolia) performed joint researches on geological survey of Dulaankhaikhan W-Mo occurrences areas in southeastern part of Khangai region. XRD results of tungsten containing quartz vein sample show that tungsten minerals are wolframite, hubnerite and ferberiteore. $WO_3$ grade of samples obtained in Silurian Khotont formation is 0.11-4.43% and that of samples obtained in Permian Delgerkhan complex is 137-3844 ppm. Average total $R_2O_3$ of samples obtained in survey area is 473 ppm which is 2.5 times larger than that of Earth's crust. The highest total $R_2O_3$ is 1326 ppm. Factor analysis results show that two areas of high tungsten contents have similar correlations with tungsten, and therefore we conclude that these two areas have the similar origin of mineralization.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.1
• /
• pp.46-55
• /
• 1999

Fluid inclusions in granite and hydrothermal quartz indicate that three fluids have affected the Sannae granite. The earliest fluid is represented by three-phase aqueous fluid inclusions with high salinity (38 to 46 wt.% NaCl equiv.). It was exsolves from a crystallizing melt and trapped at a relatively high-pressure condition. The secong fluid is represented by two-phase aqueous fluid inclusion with low entectic temperatures (< $-40^{\circ}C$). low- to moderate salinity (3 to 24.0 wt.% NaCl equiv.) and high homogenization temperatures$ ($309^{\circ}C$$473^{\circ}C$)($. This fluid was trapped at higher pressures than 300-500 bars and precipitated molybdenite and wolframite in quartz veins. It was probably generted by fluid-host rock interactions since they show a wide range of salinity within a narrow range of homogenization temperatures. The final fluid is represented by an aquenous fluid boiling that separated into high-salinity (34-38 wt.% NaCl equiv.) and low-salinity fluid (0 to 8.7 wt.%) at $303-376^{\circ}C$ and 50-150 bars. These boiling fluids precipitated euhedral quartz in miarolitic cavities. The compositions of the final fluid was rather complex in the $H_2$O-NaCl-KCI-$FeCl_2$ system. The Sannae granite was a locus for repeated fluid events including magmatic fluids during the final stage of crystallization, the convection of hydrothermal fluids causing a fluid ascending, fluid boiling, and the local W-Mo mineralization and formation of miarolitic cavities due to thermal, tectonic and compositional properties of the felsic granite.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.158-164
• /
• 1999

This paper investigated and evaluated the NASA's Shuttle Imaging Radar-C (SIR-C) multiple frequency SAR data for differential backscattering effects of microwave from the surface geological materials overlying the skarn type mineralization. Although an integrated approach in mineral exploration is more cost effective and is well in use, there are still many technical and scientific issues to be further investigated and researched. In this study we have reprocessed several sets of previously surveyed exploration data and experimented with fuzzy logic digital fusion of the preprocessed data with respect to chosen exploration targets. Among the numerous fuzzy logic operators, which are currently available for a data driven integrated exploration strategy, we used varying combinations of fuzzy MIN, fuzzy MAX, and fuzzy SUM operators along with Gamma operator for fusion of exploration data, including the contact metamorphic zone information. The final exploration target tested was a skarn type W-Mo-F mineralization in the study area. The fuzzy logic derived mineral potential anomaly almost exactly matched the differential backscattering anomalies on the C-band and L-band SIR_C data when overlaid on each other. Although this high degree of correlation between these two data sets is remarkable, the differential backscattering anomaly over the skarn type W-Mo-F mineralization in the study area requires further investigation.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.1
• /
• pp.23-34
• /
• 2016

Tsogttsetsii area, an intrusive complex associated with Cu porphyry mineralization, is located in the Gurvansaikhan island arc terrane of the Central Asian Orogenic belt, Southern Mongolia. We performed a reconnaissance survey in Tsogttsetsii area. Cu mineralization in Tsogttsetsii area is porphyry Cu type related with alkali granite intruded in Permian. Mineralogical and textural properties of the ores and associated minerals were analyzed using X-ray diffraction, thin section petrography, and Scanning electron microscopy-Energy dispersive spectroscopy (SEM-EDS). Ore minerals identified in polarizing microscope are magnetite, pyrite and bornite. Propylitic alteration zone occurs broadly in the area where malachite occurrences are shown to be spread intensively in alkali granite area. Quartz, sericite, chlorite and epidote were observed in the alteration zone samples. As results of XRD and SEM-EDS analysis, samples of copper oxides were composed mainly of malachite, cuprite and small amounts of quartz. Average and maximum Cu contents of samples collected from malachite occurrences area are 759 ppm and 6190 ppm, respectively. The characteristics of mineralization in Tsogttsetsii area is similar to Oyu Tolgoi Cu-Au (Mo) deposit and Tsagaan Suvarga Cu-Mo deposit which are 56 km south and 120 km northeast from Tsogttsetsii area, respectively. Characteristics of the study area, such as the geology, tectonic environment, lithology, mineralization, and alterations of the rocks within the survey area, resemble the characteristics of other porphyry deposits. Therefore further exploration including Induced Polarization (IP) survey for identifying subsurface orebody is required.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.323-336
• /
• 2019

The Mesozoic activity on the Korean Peninsula is mainly represented by the Triassic post-collisional, Jurassic orogenic, and Cretaceous post-orogenic igneous activities. The diversity of mineralization by each geological period came from various geothermal systems derived from the geochemical characteristics of magma with different emplacement depth. The Cretaceous metallic mineralization has been carried out over a wide range of time periods from ca. 115 to 45 Ma (main stage; ca. 100 to 60 Ma) related to post-orogenic igneous activity, and spatial distribution patterns of most metal deposits are concentrated along small granitic stocks. The late Cretaceous metal deposits in the Gyeonggi and Yeongnam massifs are generally distributed along the boundary among the Gongju-Eumseong fault system and the Yeongdong-Gwangju fault system and the Gyeongsang Basin, most of them are in the form of a distal epithermal~mesothermal Au-Ag vein or a transitional mesothermal Zn-Pb-Cu vein. On the other hand, diverse metal commodities in the Taebaeg Basin, the Okcheon metamorphic belt and the Gyeongsang Basin are produced from various deposit types such as skarn, carbonate-replacement, vein, porphyry, breccia pipe, and Carlin type. In the late Cretaceous metallic mineralization, various mineral deposits and commodities were induced not only by the pathway of the hydrothermal solution, but also by the diversity of precipitation environment in the proximity difference of the granitic rocks. The diversity of these types of Cretaceous deposits is fundamentally dependent on the geochemical characteristics such as degree of differentiation and oxidation state of related igneous rocks, and ore-forming fluids generally exhibit the evolutionary characteristics of intermediate- to low-sulfur hydrothermal fluids.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.193-199
• /
• 2016

Constancia mine is a deposit developed within Andahuaylas-Yauri Cu-Mo-Au metallogenic belt, southeastern Peru and is located in the southwestern part of Abancay deformation zone structurally as the porphyry copper deposit type. Mineralized zone in Constancia mine are composed of leached zone, secondary enrichment zone(ca. 1% Cu), mixed zone, primary mineralized zone(ca. 0.5%), skarn zone(ca. 1.5% Cu) from the upper part. Main country rock is monzonitic porphyry. Leached zone are characterized by the precipitation of limonite and looks brown in the outcrop. Oxidized zone have green due to the occurrence of copper oxide and secondary enrichment zone are characterized by the occurrence of chalcocite. Skarn zone are characterized by the occurrence of magnetite and garnet. Now, Hudbay, Canadian mining company, have 100% share about Constancia mine and started to produce commercially from January, 2015.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.525-536
• /
• 2015

Trapiche project corresponds to the advanced exploration stage which is thought to be a part of various porphyry copper deposits occurring in the margin of Andahuyalas-Yauri metallogenic belt. This deposit is genetically related to the monzonitic porphyry intrusion and Oligocene breccia pipe. Mineralization consists of primary sulfides such as pyrite, chalcopyrite, bornite, and molybdenite and secondary sulfides such as chalcocite, covellite and digenite. It occurs malachite, tenorite and cuprite as copper oxide. As a result of lixiviation or enrichment process, mineralization shows untypical zonation structure. Breccia and porphyry areas characterize the vertical zonation patterns. In the northern area, lixiviation zone, secondary enrichment zone, transitional zone and primary mineralized zone are distributed in northern area. In the western area of deposit, oxidation zone and mixed zones are narrowly occurred. Inferred resources of deposit is estimated to be 920 Mt @ 0.41% Cu with the cut-off grade of 0.15%.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.245-258
• /
• 1992

The variations of certain major and trace elements of the Onjong granite mass was studied on the basis of petrological and geochemical characteristics and compared with those of the Eonyang-Yucheon granite masses in order to investigate the geochemical differences of the granitic rocks in relation to mineralization between Pb-Zn ore district and Pb-Zn-Mo-W ore district in Kyeongsang basin. The Onjong granite mass is classified into granodiorite and monzo-granite, and the Eonyang-Yucheon granite masses into monzo-granite by the Streckeisen's diagram. Between both granite masses there are clear differences in contents of certain major elements and lithophile trace elements. The former have high contents of Ca (2.94%), Mg (1.66%) and Sr (365 ppm), and low contents of K (3.52%), Na (3.51%), Rb (116 ppm), Ba (640 ppm) and Li (18.9 ppm), whereas the latter have high contents of K (4.02%), Na (4.28%), Rb (145 ppm), Ba (695 ppm) and Li (19.3 ppm), and low contents of Ca (1.42%), Mg (0.43%) and Sr (161 ppm). Except for Mo, there are not clear differences in chalcophile trace elements between two granite masses: the Onjong granite mass has higher Mo content (7.1 ppm) lnan that (1.7 ppm) of the Eonyang-Yucheon granite masses, but Pb and Zn contents are similar between the Onjong granite mass (Pb=8.7 ppm, Zn=37.1 ppm) and the Eonyang-Yucheon granite masses (Pb=7.8 ppm, Zn=39.8 ppm). Ca and Sr contents of the Onjong granite mass (Ca> 1.5%, Sr> 270 ppm) are higher than those of the Eonyang- Yucheon granite masses (Ca<1.5%, Sr<270ppm), and Rb/Sr, Rb-Rb/Sr and K-Rb/Sr ratios are clearly distinguishable between the Onjong granite mass(Rb/Sr<0.51, Rb-Rb/Sr>250 and K-Rb/Sr>5.2) and the Eonyang- Yucheon granite masses (Rb/Sr>0.51, Rb-Rb/Sr<250 and K-Rb/Sr<5.0). Thus, variations of certain major and trace elements and ratios are applicable as geochemical index to distinguish the types of mineralization of the ore districts related to the Cretaceous granitic rocks in the Kyeongsang basin.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.455-463
• /
• 2012

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.202-208
• /
• 2014

KIGAM (Korea Institute of Geoscience and Mineral Resources) and MRAM (Mineral Resources Authority of Mongolia) performed joint survey on Bayan-Onjuul W-Mo mineralized area. Following the survey, we carried out magnetic survey. W-Mo occurrences are located with keeping a certain distance from the northern boundary of granite which has higher magnetic susceptibility values. Also, the 3D imaging results of magnetic inversion show that granite bodies are extended to the W-Mo occurrence areas from the deep main body with decreasing of susceptibility. The results of magnetic data analysis are well matched with the general characteristics of ore solution involved with W mineralization. The further study about the hidden ore deposits which have similar spatial relationship between granite and known WMo occurrences are necessary to improve the economic feasibility.