• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.277.1-277.1
• /
• 2016

We report on synthesis of large-area MoS2 using chemical vapor deposition (CVD). Relatively uniform MoS2 are obtained. To fabricate field-effect transistor (FET) devices, MoS2 films are transferred to another SiO2/Si substrate using polystyrene (PS) and patterned using oxygen plasma. In addition, to reduce contact resistance, synthesis of graphene used as channel. Device characteristics are presented and compared with the reported results.

• Coupled systems mechanics
• /
• v.5 no.4
• /
• pp.305-314
• /
• 2016

We utilize first-principles calculations within density-functional theory to investigate the possibility of strain engineering in the tuning of the band structure of two-dimensional $MoS_2$. We find that the band structure of $MoS_2$ monolayers transits from direct to indirect when mechanical strain is applied. In addition, we discuss the change in the band gap energy and the critical stains for the direct-to-indirect transition under various strains such as uniaxial, biaxial, and pure shear. Biaxial strain causes a larger change, and the pure shear stain causes a small change in the electronic band structure of the $MoS_2$ monolayer. We observe that the change in the interaction between molecular orbitals due to the mechanical strain alters the band gap type and energy.

• Ceramist
• /
• v.21 no.2
• /
• pp.29-37
• /
• 2018

In order to overcome the problems of existing low-dimensional materials (carbon nanotubes, graphene, transition metal dichalcogenides, etc) researches on new 1D materials have been studied. In the case of $LiMo_3Se_3$ and $Mo_6S_{9-x}I_x$, continuous researches have been carried out for 3D bulk synthesis and atomic scale dispersion. Recently, quantum confinement effect of $LiMo_3Se_3$ and bio-stability of $Mo_6S_{9-x}I_x$ have been proven and various applications have started to be studied. In addition, device application results using new 1D materials such as $Sb_2Se_3$ (optoelectronic devices using the property of effectively reducing exciton decay due to no dangling bond) and $VS_4$ (electrochemical energy storage using the space between 1-D nanostructures) have been reported very importantly. Therefore, it can be claimed that it has reached a very important time to find and synthesize new 1D materials and to report various characteristics not existing.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.141-147
• /
• 2014

Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.

• Journal of Powder Materials
• /
• v.23 no.5
• /
• pp.397-401
• /
• 2016

A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at $7.0g/cm^3$ and then sintered in $H_2-N_2$ at $1120^{\circ}C$. The P around the macropores and large grains reduces due to the formation of $SiO_2$ as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

FGB(Flexible Glasswool Backing) Submerged Arc Welding has been one of the main welding processes for one side butt welding in shipbuilding industries, which can efficiently improve the welding productivity by the addition of a supplementary filler metal into the molten weld pool. As recent ships have become larger in size, the application of high tensile and higher grade of steels has been continuously increased. Single pass FGB SA welding process accompanies such a high heat input when welding thick plates that the mechanical properties of weld metal can be dramatically degraded. This study has been performed in order to obtain high toughness and tensile properties of high heat input FGB SA welds, and to evaluate the effect of alloy elements on their mechanical properties. To complete welding 25mm-thick EH36 grade steel plate by single pass, 1.2mm diameter and 1.0mm long cut wires has been distributed in the groove before welding, and three different test coupons have been made using C-1.5%Mn, C-1.8%Mn-0.5%Mo, and C-1.4%Mn-1.7%Ni cut wires to investigate the influence of nickel(Ni) and molybdenum(Mo) on the mechanical properties of welds. Test results showed that the addition of Ni and Mo effectively promotes the formation of Acicular Ferrite(AF), while significantly reducing the amount of Grain Boundary Ferrite(GBF) in weld metal microstructures, which resulted in a beneficial effect on low temperature impact toughness and strength.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.2
• /
• pp.221-225
• /
• 2005

An in vitro study was conducted to examine the effect of monensin or fish oil addition on bio-hydrogenation of $C_{18^-} unsaturated fatty acids and CLA production by mixed ruminal bacteria when incubated with safflower oil. Commercially manufactured concentrate (1%, w/v) with safflower oil (0.2%, w/v) were added to mixed solution (600 ml) of strained rumen fluid and McDougalls artificial saliva (control). Monensin $Rumensin^{(R)}$, 10 ppm, w/v, MO), mixed fish oil (0.02%, w/v, absorbed to 0.2 g alfalfa hay, FO) or similar amounts of monensin and fish oil (MO+FO) to MO and FO was also added into the control solution. All the culture solutions prepared were incubated in the culture jar anaerobically at $39^{\circ}C$ up to 12 h. Higher pH (p<0.047) and ammonia concentration (p<0.042) were observed from the culture solution containing MO at 12 h incubation than those from the culture solutions of control or FO. The MO supplementation increased (p<0.0001-0.007) propionate proportion of culture solution but reduced butyrate proportion at 6 h (p<0.018) and 12 h (p<0.001) of incubations. Supplementation of MO or MO+FO increased (p<0.001) the proportions of $C_{18:2}$. The MO alone reduced (p<0.022-0.025) the proportion of c9,t11-CLA compared to FO in all incubation times. The FO supplementation increased the proportion of c9,t11-CLA. An additive effect of MO to FO in the production of c9,t11-CLA was observed at 6 h incubation. In vitro supplementation of monensin reduced hydrogenation of $C_{18^-}$UFAs while fish oil supplementation increased the production of CLA.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.93-98
• /
• 2009

The mechanical properties of $MoSi_2$ based composites containing various types of reinforcement, such as SiC, $ZrO_2$, and W, were investigated, based on detailed examinations of their microstructures. $MoSi_2$ based composites were fabricated at a temperature of $1350^{\circ}C$ using a hot-press device. The volume fraction of SiC and $ZrO_2$ particles in this composite system was fixed as 20%. The volume fraction of three types of W particles was changed from 10% to 30%. The characteristics of the $MoSi_2$ based composites were determined by means of optical microscopy and a three-point bending test. The addition of W particles to the $MoSi_2$ powders exhibited a sufficient improvement in the microstructure and mechanical property of the sintered $MoSi_2$ materials, compared to those of SiC and $ZrO_2$ particles. In particular, W/$MoSi_2$ composites containing W particles of 20 vol% represented a good flexural strength of about 530MPa at room temperature, accompanying a relative density of about 92%. The flexural strength of the W/$MoSi_2$ composites tended to decrease with an increase in the average size of the W particles.

• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.417-421
• /
• 2009

The analysis of the full length genome of Korean isolates of Pepper mottle virus (PepMoV) in previous study showed molecular variations and are found to be related to symptom variation and pathogenicity (Kim et al., 2009, Virus Res. 144:83-88). To fully understand the molecular variation of PepMoV in Korea, we further assessed the role of RNA recombination to biological variation and evolution of PepMoV. Full-length genome of a total of 17 Korean-PepMoV and 2 American (CA and FL) isolates were examined for possible detection of genetic recombination using different recombination detections programs and detected 5 and 8 tentative recombination events using RDP3 and Splits Tree4 programs, respectively. Interestingly, tentative recombinants detected such as isolates 57, 134 and 217 were previously identified as severe isolates and 205135 and 205136 as differentiating isolates (Kim et al., 2009, Virus Res. 144:83-88). In addition, recombination was frequently detected in the Vb isolate, the first PepMoV isolate reported in Korea, suggesting significant involvement in the evolution of PepMoV in Korea. These initial results of our recombination analyses among PepMoV isolates in Korea may serve as clues to further investigate the biological variations and evolution of PepMoV brought about by recombination.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.122-125
• /
• 1994

The magnetic properties of Nd-Fe-B alloys of containing 4 at.% Nd have been studied for the development of new type rare-earth magnets. The amorphous phase of a melt-spun $Nd_{4}Fe_{85.5}B_{10.5}$ alloy is transformed into the phases which have a small amount of $Nd_{2}Fe_{14}B_{1}$ in ${\alpha}-Fe$ matrix by annealing above their crystallization temperature. The addition of Mo, Nb, V or Cu to $Nd_{4}Fe_{85.5}B_{10.5}$ alloy results in the reduction of grain size and the sub¬sequent improvement of the coercivity. The coercivity of $Nd_{4}Fe_{82}B_{10}M_{3}Cu_{1}$(M = Mo, Nb, V) alloys increases in the order of M = V < Nb < Mo and shows the highest value of 2.7 kOe when M = Mo. On the other hand, the rem¬anence of these alloys shows the opposite trend and the rn>st improved value of 1.35 T is observed when M = V.