• Journal of Information Display
• /
• v.10 no.4
• /
• pp.180-183
• /
• 2009

A stamping-assisted rubbing technique for generating bidirectional alignment in the fabrication of wide-viewing twistednematic (TN) liquid crystal displays (LCDs) was developed. A patterned layer of a fluorinated acrylate polymer was transferred onto the first rubbed alignment layer prepared on a substrate by stamping. The fluorinated acrylate polymer provides a protective layer that covers the first alignment layer during the second rubbing process to facilitate the bidirectional alignment of the LC molecules. The LC cell in the twisted geometry with two bidirectional-alignment layers showed stable electro-optic properties and wide-viewing characteristics. The stamping-assisted rubbing technique serves as a mask-free alignment method of producing multidomains for wide-viewing LCDs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.711-720
• /
• 2012

In this paper, we introduce the implementation of driver fatigue monitering system and its result. Input video device is selected commercially available web-cam camera. Haar transform is used to face detection and adopted illumination normalization is used for arbitrary illumination conditions. Facial image through illumination normalization is extracted using Haar face features easily. Eye candidate area through illumination normalization can be reduced by anthropometric measurement and eye detection is performed by PCA and Circle Mask mixture model. This methods achieve robust eye detection on arbitrary illumination changing conditions. Drowsiness state is determined by the level on illumination normalize eye images by a simple calculation. Our system alarms and operates seatbelt on vibration through controller area network(CAN) when the driver's doze level is detected. Our algorithm is implemented with low computation complexity and high recognition rate. We achieve 97% of correct detection rate through in-car environment experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.127-127
• /
• 2011

We investigate the transparent TFTs using a transparent ZnSnO3 (ZTO)/Ag/ZTO multilayer electrode as S/D electrodes with low resistivity of $3.24{\times}10^{-5}$ ohm-cm, and high transparency of 86.29% in ZTO based TFTs. The Transparent TFTs (TTFTs) are prepared on glass substrate coated 100 nm of ITO thin film. On atomic layer deposited $Al_2\;O_3$, 50 nm ZTO layer is deposited by RF magnetron sputtering through a shadow mask for channel layer using ZTO target with 1 : 1 molar ratio of ZnO : $SnO_2$. The power of 100W, the working pressure of 2mTorr, and the gas flow of Ar 20 sccm during the ZTO deposition. After channel layer deposition, a ZTO (35 nm)/Ag (12 nm)/ZTO(35 nm) multilayer is deposited by DC/RF magnetron sputtering to form transparent S/D electrodes which are patterned through the shadow mask. Devices are annealed in air at 300$^{\circ}C$ for 30 min following ZTO deposition. Using UV/Visible spectrometer, the optical transmittances of the TTFT using ZTO/Ag/ ZTO multilayer electrodes are compared with TFT using Mo electrode. The structural properties of ZTO based TTFT with ZTO/Ag/ZTO multilayer electrodes are analyzed by high resolution transmission electron microscopy (HREM) and X-ray photoelectron spectroscopy (XPS). The transfer and output characterization of ZTO TTFTs are examined by a customized probe station with HP4145B system in are.

• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.84-97
• /
• 2007

Dancing with weapons existed spontaneously when war and hunting were common, and sword dancing, as a dance for banquets, developed and changed in various forms. In Korea, sword dancing was performed from the Three Dynasty Period, and in Joseon Dynasty, it was performed as court ceremony. The origin of the sword dancing, that has been performed from the Joseon Dynasty until now, and costumes for sword dancing isn't accurate. The purpose of this study is to analyze the sword dancing costume of China, Korea's neighboring country, and that of Korea in the same period, and to find out the process of wearing military uniform: Jun-mo, Jeo-go-ri, Chi-ma, Gwae-ja, and Jun-dae, being settled as the sword dancing costumes of Korea in late Joseon Dynasty. In China, sword dancing became famous in Han Dynasty, and in Tang Dynasty, it was the meridian of sword dancing with the most magnificent form. After the Song Dynasty, the sword dancing fades away. In Korea, the sword dancing started as a mask dancing of children that Hwa-rang(bravery youth) in Shilla Dynasty started. After the Unified Shiila Period, the sword dancing of Tang Dynasty spread to Korea, with active interchange between the two countries. After the Corea Dynasty, the mask dancing of children faded and the sword dancing of Tang Dynasty changes into Korean form. It was incorporated into the court ceremony after the mid-period of Joseon Dynasty, and the costumes were settled as the military uniform, which are Gwae-ja, and Jun-dae on top of Chi-ma, and Jeo-go-ri, and Jun-moon the head.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.5
• /
• pp.286-296
• /
• 2019

PURPOSE. The aim was to study the masking ability of high-translucency monolithic zirconia and provide guidance in selecting resin luting cements in order to mask discolored substrates. MATERIALS AND METHODS. 160 high-translucency zirconia specimens were divided into 32 groups depending on their thickness and shades. Using five shades of try-in paste, the specimens were luted onto the substrates (Co-Cr, precious-metal, opaque porcelain-sintered Co-Cr, opaque porcelain-sintered precious-metal, and 5M3-shade zirconia). All CIELAB color parameters were measured and statistically analyzed. RESULTS. Zirconia shade and thickness and try-in paste shade affected CIELAB color parameters (P=.000) in different substrates groups, and there were interactions among these factors (P=.000). All five try-in paste shades can be chosen to achieve ${\Delta}E$ values of zirconia with 1.2 - 1.5 mm for masking dark-tooth-like 5M3-shade and zirconia with 1.5 mm for masking precious-metal groups < 2.6. Only suitable try-in paste shades were used, can ${\Delta}E$ values that less than 2.6 be achieved when applied translucent monolithic zirconia with 0.7-1.0 mm for masking dark-tooth-like 5M3-shade and zirconia with 0.7 - 1.2 mm for masking precious-metal groups. CONCLUSION. Choosing suitable resin cement shades is necessary for high-translucency monolithic zirconia to achieve ideal masking ability (${\Delta}E$ < 2.6) on the dark-tooth.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.3
• /
• pp.113-120
• /
• 2020

With the recent development of communication equipment, the demand for communication equipment is gradually increasing. Accordingly, various signal processing has been studied. In the case of an image, noise removal is an indispensable step because noise propagation problems may occur if noise is not removed in the pre-processing process. Salt and Pepper noise is a typical impulse noise with two extremes. Various studies have been conducted to remove such noise, and there are CWMF, MF and MMF. However, the existing methods are somewhat insufficient in the high-density noise region. Therefore, in this study, we have proposed an algorithm that filters the size of the mask according to the number of noises inside the 7×7 mask and filters it with a modified switching filter using the histogram distribution of the image. In the case of the proposed algorithm, noise can be effectively removed in a high-density noise region. For objective judgment, PSNR was used to compare and analyze with existing algorithms.

• Research in Community and Public Health Nursing
• /
• v.33 no.4
• /
• pp.418-431
• /
• 2022

Purpose: The aims of this study were to examine the rate of depression among older adults living alone and to identify factors associated with depression in older adults living alone during the COVID-19 pandemic. Methods: A secondary data analysis was performed using data from the 2020 Korea Community Health Survey. The study participants were 18,824 older adults aged 65 years and over living alone. The data of the complex sample design was analyzed with consideration for weights, stratification, and clustering. Complex sample multiple logistic regression was conducted to identify factors associated with depression in older adults living alone during the COVID-19 pandemic. Results: The results showed that the rate of depression in older adults living alone was 6.3%. Older adults living alone with decreased physical activity, decreased hours of sleep, and an increased or similar frequency of meeting with friends or neighbors were found to be more likely to have depression. In terms of factors related to the practice of COVID-19 infection prevention and control rules, not disinfecting regularly and not wearing a mask indoors were related to depression. For health-related factors, fair or poor self-rated health status, not having breakfast every day, and feeling stressed were related to depression. Conclusion: It is recommended to develop tailored interventions to prevent depression among older adults living alone by considering the factors related to their depression during the COVID-19 pandemic.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.59-63
• /
• 2013

In this paper, the impact of the copper densities of substrate layers on IC package warpage is studied experimentally and numerically. The substrate strips used in this study contained two metal layers, with the metal densities and patterns of these two layers varied to determine their impacts. Eight legs of substrate strips were prepared. Leg 1 to leg 5 were prepared with a HD (high density) type of strip and leg 6 to leg 8 were prepared with UHD (ultra high density) type of strip. The top copper metal layer was designed to feature meshed patterns and the bottom copper layer was designed to feature circular patterns. In order to consider the process factors, the warpage of the substrate bottom was measured step by step with the following manufacturing process: (a) bare substrate, (b) die attach, (c) applying mold compound (d) and post reflow. Furthermore, after the post reflow step, the substrate strips were diced to obtain unit packages and the warpage of the unit packages was measured to check the warpage trends and differences. The experimental results showed that the warpage trend is related to the copper densities. In addition to the experiments, a Finite Element Modeling (FEM) was used to simulate the warpage. The nonlinear material properties of mold compound, die attach, solder mask, and substrate core were included in the simulation. Through experiment and simulation, some observations were concluded.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.43-107
• /
• 2005

A ritual ceremony accompanied by a song and dance is called as Kagura in Japan. The word Kagura is originally derived from Kamukura, which means the place where spirits reside. However, later it came to refer to the whole process of the ritual ceremony itself. Through the field studies, this paper examines Takachiho-kagura, helded in Takachiho, known as the village of myths, located in northern Miyazaki-ken in Japan. Kagura takes place all night through in each and every village in Takachiho and it normally runs from the end of November when the harvest season ends until early February the next year. One ordinary house is especially chosen for this ceremony, in which Kagura performs 33 repertoires. Takachiho-kagura is sometimes called as Yokagura, since the performance takes place over-night. A song and dance is performed by ordinary village people called hoshyadong, who inherited Takachiho-kagura. Currently, the ceremony is held in more than 20 villages and designated by the government as "Important Intangible Folk Cultural Property" in Japan. Takachiho-kagura follows the example of rituals held in Sada shrine in Izumo, which is now eastern Hiroshima-ken. It is the dance using a bell, a sword, a fan, which signify Norimono and is usually combined with mask-play called as Shinno. From the shrine of village, itwelcomes the gods who defense their village, called Ujikami and other 8 million gods, called Yaoyorozunokami, in Kagurayado, where Kagura of 33 repertoires is played in order. Kagura starts from dances for attendance of the gods, Hikomai, Daidono, Kamioroshi, performs dances of Amanoiwato, the gate of heaven's cave in Japanese myths, Dazikara, Uzume, Dotori, and continues dances for the old ghosts Shibahiki, Yatsubachi mixed with acrobatics. Finally, this performance ends with dances to send off the gods, Hinomae, Gurioroshi, Gumooroshi, until the dawn the next morning. This paper explores Takachiho-kagura from the perspective of folk performance with ethnography. These days, ecstasy and oracle do not happen in Takachiho-kagura. However, it kept the old form of folk performance as Kagura held in ordinary house. Especially, in Takachiho, remarkable venue of the Japanese myths, Takachiho-kagura is developed artistically. The first field study was held in Gokamura, Iwato-zone and Ashakabe, Mitai-zone between December 6th and December 12th 1997. Afterwards, the second field study was conducted in the area of Shiba and Ashakabe from December 17th until December 19th 1997 and from December 1st until December 10th 2000.