• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.135-135
• /
• 2010

In Mn-Ge equilibrium phase diagram, many Mn-Ge intermetallic phases can be formed with difference structures and magnetic properties. The MnGe has the cubic structure and antiferromagnetic(AFM) with Neel temperature of 197 K. The calculation predicted that the $MnGe_2$ with $Al_2Cu$-type is hard to separate between the paramagnetic(PM) states and the AFM states because this compound displays PM and AFM configuration swith similar energy. Mn-doped Ge showed the FM with Currie temperature of 285 K for bulk samples and 116 K for thin films. In addition, the $Mn_5Ge_3$ compound has hexagonal structure and FM with Curie temperature around 296K. The $Mn_{11}Ge_8$ compound has the orthorhombic structure and Tc is low at 274 K and spin flopping transition is near to 140 K. While the bulk $Mn_3Ge_2$ exhibited tetragonal structure ($a=5.745{\AA}$;$c=13.89{\AA}$) with the FM near to 300K and AFM below 150K. However, amorphous $Mn_3Ge_2$ ($a-Mn_3Ge_2$) was reported to show spin glass behavior with spin-glass transition temperature (Tg) of 53 K. In addition, the transition of crystalline $Mn_3Ge_2$ shifts under high pressure. At the atmospheric pressure, $Mn_3Ge_2$ undergoes the magnetic phase transition from AFM to FM at 158 K. The pressure dependence of the phase transition in $Mn_3Ge_2$ has been determined up to 1 GPa. The transition was found to occur at 1 GPa and 155 K with dT/dP=-0.3K/0.1 GPa. Here report that Ferromagnetic $Mn_3Ge_2$ thin films were successfully grown on GaAs(001) and GaSb(001) substrates using molecular beam epitaxy. Our result revealed that the substrate facilitates to modify magnetic and electrical properties due to tensile/compressive strain effect. The spin-flopping transition around 145 K remained for samples grown on GaSb(001) while it completely disappeared for samples grown on GaAs(001). The antiferromagnetism below 145K changed to ferromagnetism and remained upto 327K. The saturation magnetization was found to be 1.32 and $0.23\;{\mu}B/Mn$ at 5 K for samples grown on GaAs(001) and GaSb(001), respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.02a
• /
• pp.50-50
• /
• 1994

Half-metallic Heusler alloys (NiMnSb, ppdMnSb, pptMnSb) have attracted much attention due to their unique electronic and magnetic structures. Sppin-ppolarized band structure calculation ppredicts metallic behavior for the majority sppin states and semiconductor behavior for the minority sppin states. We have studied the electronic structures of these half-metallic Heusler alloys by core-level pphotoemission sppectroscoppy of Mn 2pp and 3s XppS sppectra. We found large intensities of Mn 2pp satellites and 3s exchange spplitting comppared with other metal Mn-alloys. These satellite structure can be understood by applying Anderson imppurity model. This fact supports the calculated sppin pprojected ppartial density of states which suggests that the valence electrons be highly sppin ppolarized near Fermi level and that the electrons involved with charge-transfer be mainly minority sppin ones which have semiconducting band structure. The trend of charge transfer energies Δ from ligands (Sb 5pp) to Mn 3d, obtained from our model fitting, is consistent with that calculated from sppin pprojected ppartial density of state. Also the trend of d-d electron correlation energies U calculated from Mn Auger line L3 VV by Mg $K\alpha$ source is comppatible with that resulted from our model fitting. We fitted the Mn 3s curve in the same way as for insulating Mn comppounds by using the same pparameters calculated from Mn 2pp curve fitting exceppt for the Coulomb interaction energy Q between core hole and d-electrons. The 3s sppectra were analyzed by combing the charge transfer model and a simpple model taking into account the configuration mixing effect due to the intra-shell correlation. We found that the exchange interaction between 3s hole and 3d electrons is mainly respponsible for the satellite of Mn 3s sppectra. This is consistent with the neutron scattering data, which suggests local 3d magnetic moment. We find that the XppS analysis results of Mn 2pp and 3s satellite structures of half-metallic Heusler alloys are very similar to those of insulating transition metal comppounds.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.2
• /
• pp.150-157
• /
• 2020

The protective effects of a Celastrus orbiculatus Thunb (CO) extract against manganese dioxide (MnO₂)-induced cytotoxicity in cultured C6 glioma cells were examined. This study assessed the antioxidative effects, including the suppressive ability of lipid peroxidation (LP), the inhibitory ability of xanthine oxidase (XO), and the cell viability. MnO₂ decreased the cell viability remarkably in a dose-dependent manner. The XTT₅₀ value was determined to be 146.7 μM in these cultures. The cytotoxicity of MnO₂ was calculated to be mid-toxic using Borenfreund and Puerner's toxic criteria. Kaempferol (KAE) increased the cell viability damaged by MnO₂-induced cytotoxicity significantly. Regarding the protective effects of the CO extract on MnO₂-induced cytotoxicity, the CO extract increased cell viability significantly compared to the MnO₂-treated group. The CO extract also had inhibitory abilities against lipid peroxidation (LP) and xanthine oxidase (XO). From these findings, oxidative stress is involved in the cytotoxicity of MnO₂. The CO extract effectively blocked the cytotoxicity induced by MnO₂ via its antioxidative effects. Conclusively, natural resources, such as the CO extract, might be a useful agent for the diminution or improvement of the heavy metal cytotoxicity correlated with disease through oxidative stress, such as MnO₂, a Parkinsonism inducer.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.560-565
• /
• 2005

Catalytic performances of zeolite catalysts such as H-mordenite(HM), H-Beta$(H{\beta})$, H-USY(HUSY) for the transmethylation between 1-methylnaphthalene(1-MN) and 2-methylnaphthalene(2-MN) were investigated in a fixed-bed flow reactor. $H{\beta}$ showed higher and more stable conversion than others to exhibit a high and stable 2-MN/1-MN ratio of 2.3 and 2,6-DMN/2,7-DMN ratio of 1.3 at the $1^{st}$ hour of time on stream under the reaction conditions as follows: reaction temperature of $350^{\circ}C$, reaction pressure of 1.5 MPa, WHSV of $2.7g_{feed}/g_{cat}{\cdot}h$ and the molar ratio of 1-MN and 2-MN of 1:1. The catalytic behavior has been discussed in relation with the catalyst pore structure and acidity.

• Development and Reproduction
• /
• v.13 no.4
• /
• pp.321-327
• /
• 2009

This study aimed to examine the testis toxicities of metal compound, manganese (Mn), which may be generated as mist or fume in the industrial sites. As well as serum prolactin (PRL) concentration was analyzed because Mn accumulation in basal ganglia up-regulates serum PRL and hyperprolactinemia consecutively induces the testis toxicity. Male F344 rats were divided into the 4 groups (2 controls and 2 Mn treated groups, n=10) on the basis of the test condition (inhalation, Mn $1.5mg/m^3$ or not) and treatment period (for 4-weeks and 13-weeks). The treatment time was 6 hr. a day, 5 days a week for the whole body. Basic tests including changes in body weight, feed rate were observed. Blood and testis Mn concentration, and testis toxicity test such as the number and deformity test of sperm were also observed. Serum PRL level was analyzed by ELISA to certify the relationship between the Mn induced increase of the serum PRL level and sperm production. Blood and testis Mn concentrations were significantly and dose-dependently increased. Sperm count was decreased in Mn-treatment groups than control in a treatment time dependent manner. Morphological analysis of cauda epidydimal sperm showed that the frequencies of morphologically abnormal sperms such as bent tail and small head were increased in the both Mn-treatment groups than control. A significant increase in serum PRL levels was found in response to Mn treatment but it was not hyperprolactinemia range. These results suggest that treatment of Mn up-regulates the serum PRL concentration and induces the testis toxicity. The No Aversed Effect Level (NOAEL) of inhaled Mn on the male rat testis may be under the $1.5mg/m^3$.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.15-20
• /
• 1995

We have prepared 20 kinds of Mn-Zn ferrites as content of CaO(0.1 mol%), NiO(0.0~0.60 mol%) and CoO(0.0~0.8 mol%) adding by the coprecipitation method and studied the magnetic properties as content of CaO, NiO and CoO adding. Initial permeability decrease as the content of NiO and CoO adding increases, while Curie tem~ perature increase as the content of NiO and CoO adding increases. $(H_{c})$, $(B_{s})$ and $(W_{h})$ increase as content of NiO adding increases.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1120-1128
• /
• 2004

The SCBFC was composed of bilayered cathode, the outside of which was modified with $Fe^{3+}$ (graphite-Fe(III) cathode) and the inside of which was porcelain membrane, and of an anode which was modified with $Mn^{4+}$ (graphite­Mn(lV) anode). The graphite-Fe(III), graphite-Mn(IV), and porcelain membrane were designed to have micropores. The outside of the cathode was exposed to the atmosphere and the inside was contacted with porcelain membrane. In all SCBFCS the graphite-Fe(III) was used as a cathode, and graphite-Mn(IV) and normal graphite were used as anodes, for comparison of the function between normal graphite and graphite-Mn(IV) anode. The potential difference between graphite-Mn(IV) anode and graphite-Fe(III) cathode was about 0.3 volt, which is the source for the electron driving force from anode to cathode. In chemical fuel cells composed of the graphite-Mn(IV) anode and graphite-Fe(III) cathode, a current of maximal 13 mA was produced coupled to oxidation of NADH to $NAD^{+}$ the current was not produced in SCBFC with normal graphite anode. When growing and resting cells of E. coli were applied to the SCBFC with graphite-Mn(IV) anode, the electricity production and substrate consumption were 6 to 7 times higher than in the SCBFC with normal graphite anode, and when we applied anaerobic sewage sludge to SCBFC with graphite-Mn(IV) anode, the electricity production and substrate consumption were 3 to 5 times higher than in the SCBFC with normal graphite anode. These results suggest that useful electric energy might possibly be produced from SCBFC without electron mediators, electrode-active bacteria, and extra energy consumption for the aeration of catholyte, but with wastewater as a fuel.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.127-130
• /
• 2004

Magnetic properties and thermal stability by exchange biased perpendicular magnetic anisotropy in (Pd/Co)$_{N}$FeMn multilayer deposited by do magnetron sputtering system are investigated. We measured the perpendicular magnetization curves of (Pd(0.8nm)/Co(0.8nm)$_{5}$FeMn multilayer as function of FeMn thickness and annealing temperature. As FeMn thickness increases from 0 to 21nm, the perpendicular exchange bias(Hex) obtained 127 Oe at FeMn thickness 15nm. As the annealing temperature increases to 24$0^{\circ}C$, the E$_{ex}$ increased from 115 Oe to 190 Oe and disappeared exchange biased perpendicular magnetic anisotropy effect at 33$0^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.12 no.1
• /
• pp.24-29
• /
• 2002

It was observed that exchange bias field was increased with smooth surface and better ${\gamma}$-FeMn formation. Sputtering conditions were varied for the control of the surface roughness and ${\gamma}$-FeMn formation. From the results of Cu deposition as underlayer, it was found that ${\gamma}$-FeMn formation was closely related with the thickness of underlayer. After heat treatment, exchange bias field was increased over three times. This improvement was likely that the crystallites of ${\gamma}$-FeMn were well formed. In Co/Cu/Co/FeMn spin valve structure, magnetoresistance was increased over 1.4 times through the heat treatment. This was due to the disappearance of Co/Cu intermixed dead layer and removal of defect, and this was examined by AES analysis.