• Journal of the Korean Ceramic Society
• /
• v.21 no.2
• /
• pp.149-155
• /
• 1984

The effect of $ZrO_2$ dispersed phase on the mechanical properties in $Al_2O_3$-$ZrO_2$system has been studied. There are both metastable tetragonal phase and stable monoclinic phase of $ZrO_2$particles diespersed in Al2O3 matrix at room temperature. Metastable tetragonal $ZrO_2$ changes to the stable monoclinic structure within the stress field of the crack. And microcracks are formed by the expansion of $ZrO_2$during the tetragonal-monoclinic transformation on cooling. Therefore stress-induced phase transformation and inclusion-induced microcracking contribute to the mec-hanical properties of $Al_2O_3$-$ZrO_2$system. Sintered composites containing 10m/o $ZrO_2$ yield KiC values of 6.5MN/$m^{3/2}$ much greater than that of pure $Al_2O_3$ This increase results from microcrack extension and stress-induced phase transformation absor-bing energy by crack propagation. Flexural strength of composites is decreased considerably in comparison with pure $Al_2O_3$ This decrease results from microcrack as a crack former and higher porosity than pure $Al_2O_3$.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.780-787
• /
• 2008

For the advanced high strength steels (AHSS), high-manganese TWIP (twinning induced plasticity) steels exhibit high tensile strength (800-1000 MPa) and high elongation (50-60%). However, the TWIP steels need to be understood of delayed fracture following the cup drawing test. Among the factors to cause delayed fracture, i.e, martensite transformation, hydrogen embrittlement and residual stress, the effects of martensite transformation (${\gamma}{\rightarrow}{\varepsilon}$ or ${\gamma}{\rightarrow}{\alpha}^{\prime}$) were investigated on the delayed fracture phenomenon. Microstructural phase analysis was conducted for cold rolled (20, 60, 80% reduction ratio) steels and tensile deformed (20, 40, 60% strain) steels. For the Al-added TWIP steels, no martensite phase was found in the cold rolled and tensile deformed specimen. But, the TWIP steels with no Al addition indicated the martensite transformation. The cup drawing specimens showed the martensite transformation irrespective of the Al-addition to the TWIP steel. However, the TWIP steel with no Al exhibited the larger amount of martensite than the case of the TWIP steel with Al addition. For the reason, it was possible to conclude that the Al addition suppressed the martensite transformation in TWIP steels, therefore preventing the delayed fracture effectively. However, it was interesting to note that the mechanism of delayed fracture should be incorporated with hydrogen embrittlement and/or residual stress as well as the martensite transformation.

• Journal of Society of Preventive Korean Medicine
• /
• v.6 no.2
• /
• pp.66-85
• /
• 2002

Traditional herbal medicine is used extensively among the Korean populations, and other Asian countries employ similar therapies as well In recent years, extensive focus was laid on adulteration of the herbal medicine with heavy metals. This may be mainly due to a soil contamination by an environmental pollution. The objective of this study is to identify the contents of various heavy metals in the blood from OhJeokSan-Decoction (OD) treated-rats. For this study, 13 kinds of metals including essential and heavy metals, i.e. Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se and Zn were analyzed by a slight modification of EPA methods and the following results are obtained. ; 1. There is no significant difference between the OD-treated groups and control group in liver, kidney, bone, brain, weight, food intake. 2. The amount of each metal analyzed in the liver are as follows; Al ; $0.235{\sim}4.215mg／kg$, As ; $0.103{\sim}0.461mg／kg$, Cd ; $0.005{\sim}0.010mg／kg$, Co ; $0.017{\sim}0.046mg／kg$, Cr ; $0.137{\sim}0.403mg／kg$, Cu ; $1.736{\sim}4.827mg／kg$, Fe ; $54.472{\sim}381.447mg／kg$, Hg ; not detected, Mn ; $1.159{\sim}2.803mg／kg$, Ni ; $0.007{\sim}0.095mg／kg$, Pb ; not detected, Se ; $0.682{\sim}1.887mg／kg$, Zn ; $10.213{\sim}26.119mg／kg$, by groups, respectively. In control and other experimental group, several metal (Co, Cu, Mn, Zn, As, Cr) has a significant difference, but in experimental I and other experimental II, III, IV, V groups, there are no significant difference. 3. The amount of each metal analyzed in the kidney are as follows; Al ; $1.712{\sim}31.230mg／kg$, As ; $0.062{\sim}0.439mg／kg$, Cd ; $0.010{\sim}0.062mg／kg$, Co ; $0.000{\sim}0.101mg／kg$, Cr ; $0.125{\sim}0.636mg／kg$, Cu ; $3.385{\sim}12.502mg／kg$, Fe ; $41.148{\sim}99.709mg／kg$, Hg ; $0.000{\sim}0.270mg／kg$, Mn ; $0.433{\sim}2.301mg／kg$, Ni ; $0.000{\sim}0.221mg／kg$, Pb ; $0.000{\sim}0.584mg／kg$, Se ; $0.540{\sim}1.600mg／kg$, Zn ; $8.775{\sim}17.060mg／kg$, by groups, respectively. The concentration of Cu, Se, Cr, and Hg are variated significantly in control and other experimental group, and Cu, Se, Cd, Cr are variated significantly in experimental I and other experimental II, III, IV, V groups. 4. The amount of each metal analyzed in the bone(tibia and fibula) are as follows; Al ; $9.557{\sim}119.464mg／kg$, As ; $0.139{\sim}12.250mg／kg$, Cd ; $0.000{\sim}0.295mg／kg$, Co ; $0.022{\sim}0.243mg／kg$, Cr ; $0.239{\sim}1.999mg／kg$, Cu ; $0.000{\sim}2.291mg／kg$, Fe ; $240.249{\sim}841.956mg／kg$, Hg ; $0.000{\sim}0.983mg／kg$, Mn ; $0.214{\sim}7.353mg／kg$, Ni ; $5.473{\sim}11.453mg／kg$, Pb ; $0.000{\sim}8.502mg／kg$, Se ; $0.000{\sim}3.005mg／kg$, Zn ; $61.158{\sim}195.038mg／kg$, by groups, respectively. The concentration of Se, Cd are variated significantly in control and other experimental groups, and Se is variated significantly in experimental I and other experimental II, III, IV, V groups. 5. Exceptionally several metal concentration is increased or decreased. but there is no significant harmful difference of metal concentration in the liver, kidney and bone, from the OD-treated-rats compared to those of the control group even if higher dosage($1{\sim}8$ times dosage of person) of OD was administered. Thus, it is expected that the herbal decoction in the traditional herbal medicine would not lay any burden on the body and the heavy metal toxins would not affect our physiological system. However, other kinds of herbal treatment, such as i.v. and i.p. should be considered in terms of metal toxicity in the body since the level of certain metal.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.369-376
• /
• 2008

The aim of this study was to compare the compositions and cytotoxicity of white ProRoot MTA (white mineral trioxide aggregate) and 3 kinds of Portland cements. The elements, simple oxides and phase compositions of white MTA (WMTA), gray Portland cement (GPC), white Portland cement (WPC) and fast setting cement (FSC) were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD). Agar diffusion test was carried out to evaluate the cytotoxicity of WMTA and 3 kinds of Portland cements. The results showed that WMTA and WPC contained far less magnesium (Mg), iron (Fe), manganese (Mn), and zinc (Zn) than GPC and FSC. FSC contained far more aluminum oxide ($Al_2O_3$) than WMTA, GPC, and WPC. WMTA, GPC, WPC and FSC were composed of main phases. such as tricalcicium silicate ($3CaO{\cdot}SiO_2$), dicalcium silicate ($2CaO{\cdot}SiO_2$), tricalcium aluminate ($3CaO{\cdot}Al_2O_3$), and tetracalcium aluminoferrite ($4CaO{\cdot}Al_2O_3{\cdot}Fe_2O_3$). The significance of the differences in cellular response between WMTA, GPC, WPC and FSC was statistically analyzed by Kruskal-Wallis Exact test with Bonferroni' s correction. The result showed no statistically significant difference (p > 0.05). WMTA, GPC, WPC and FSC showed similar compositions. However there were notable differences in the content of minor elements. such as aluminum (Al), magnesium, iron, manganese, and zinc. These differences might influence the physical properties of cements.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.97-105
• /
• 2014

Artificial precipitation ponds, consisting of three steps of oxidation pond, successive alkalinity producing system (SAPS) and swamp, were constructed for the treatment of the acid mine drainage from the Iwal coal mine. The efficacies of the passive treatment system in terms of neutralization of mine water and removal of dissolved ions were evaluated by the chemical analyses of the water samples. Mine water in the mine adits was acidic, showing the pH value of 2.28-2.42 but the value increased rapidly to 6.17-6.53 in the Oxidation pond. The purification efficiencies for the removal of Al and Fe were 100%, whereas those of $SO_4$, Mg, Ca, and Mn were relatively low of 50%, 40%, 24%, and 59%, respectively. These results indicate a need for application of additional remediation techniques in the passive treatment systems. The precipitates that formed at the bottom of the mine water channels were mainly schwertmannite ($Fe_8O_8(OH)_6SO_4$) and those in the leachate water were 2-line ferrihydrite ($Fe_2O_3{cdot}0.5H_2O$).

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.121-128
• /
• 2005

A study on the selective separation of $^{99}Tc,\;^{94}Nb,\;^{55}Fe,\;^{90}Sr$ and $^{59}Ni(^{63}Ni)$ from various radioactive wastes discharged from the nuclear power plants in Korea is being performed for use in their quantifications which are indispensible for the evaluation of the radionuclide inventory. Separation behaviour of Ce, Ca, Mg, Al, Cr, Ti, Mn and Cu recovered along with Ni during the separation of Re (as a surrogate of $^{99}Tc$), Nb, Fe and Sr by anion exchange and Sr-Spec extraction chromatography was investigated by cation exchange and Ni-Spec extraction chromatography using synthetic radioactive waste dissolved solutions containing matrix elements such as Re, Nb, Fe, Sr, Ni, B, Na, K, Ce, Co, Ca, Mg, Al, Zn, Cr, Pb, Cd, Mo, Mn, Cu, Zr, Ti and U. To purify the Ni fraction recovered and prepare a radionuclide source available for gas proportional counting, an application of the Ni precipitation procedure with dimethylglyoxime in the medium of ammonium citrate and tartaric acid solutions as a masking agent for co-existing metal ions was described in detail.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.322-328
• /
• 2004

Available nutrients in soil solution play key roles on the growth of plants, but the equilibria in soil solution can be disturbed by acid precipitation. In this study, we investigated the relationships between element concentrations in the needles of Pinus thunbergii and chemical properties of forest soil solutions in the industrial complexes as an effort to find the possible limiting factor(s) causing the forest decline. The Ca/Al molar ratios in needles of Pinus thunbergii collected from the control sites were 18. However, at Onsan and Ulsan industrial complexes, those were decreased to the ranges from 10 to 11 for the one-year old needles and from 9 to 10 for the two-year old needles. The Mg/Al molar ratios showed similar tendencies with the Ca/Al molar ratios of the needles of Pinus thunbergii. In the A horizon, there existed a significant correlation between Mg concentrations in the needles of Pinus thunbergii and Ca/Al molar ratio of forest soil solution. Calcium concentrations in the needles of Pinus thunbergii in the B horizon were also significantly correlated with Ca/Al molar ratios of forest soil solutions. The uptakes of Ca and Mg by Pinus thunbergii were mainly limited by Al in the soil solutions of the A horizon and by Mn and Al in the soil solutions of the B horizon.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.184-191
• /
• 2004

Forest soils were collected from various sites adjacent to the heavy industrial complexes and soil solutions were extracted to characterize the chemical properties and to find factors affecting forest decline by acid deposition. Concentrations of $NO_3{^-}$, $SO{_4}^{2-}$, $F^-$ and Al in the soil solutions collected from industrial complexes were 2-33 times higher than those from the non-industrial areas. pH and Al concentrations were significantly correlated with $NO_3{^-}$ and $SO{_4}^{2-}$ concentrations. Forest soils from Onsan and Ulsan regions had very low Ca and Mg concentrations in the soil solutions. In these sites, the molar ratios of Ca/Al and Mg/Al were also lower than 2 and 1, respectively. Aluminum concentrations in the A and B horizons were 547 and $683mg\;kg^{-1}$, respectively, which were considered to be high enough to inhibit tree growth. Magnesium deficiency in A horizon and high concentrations of Al and Mn in B horizon were considered as the major limiting factors for tree growth by inhibiting the uptake of Ca and Mg and causing the imbalance of nutrients in both soil solution and trees.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.643-659
• /
• 2012

The Chungju Fe-REE deposit is located in the Kyemyeongsan Formation of the Ogcheon Group. The Kyemyeongsan Formation includes meta-volcanic rocks and pegmatite hosted REE deposit which show different kind of REE-containing minerals. The meta-volcanic rocks hosted REE deposits' main REE minerals are allanite, zircon, apatite, and sphene, whereas the pegmatite hosted REE deposits is mainly composed of fergusonite, and karnasurtite, zircon, thorite. The meta-volcanic rock hosted major REE mineral is allanite as the form of aggregation and contains 23.89-29.19 wt% TREO (Total Rare Earth Oxide), 4.71-9.92 wt% $La_2O_3$, 11.30-14.33 wt% $Ce_2O_3$, 0.11-0.29 wt% $Y_2O_3$, 0.15-0.94 wt% $ThO_2$, as a formula of (Ca, Y, REE, Th)$_{2.095}$(Mg, Al, Ti, Mn, $Fe^{3+})_{2.770}(SiO_4)_{2.975}(OH)$. Accompanying REE in a coupled substitution for $Ca^{2+}$ (M1 site) and $Al^{3+}-Fe^{2+}$ (M2 site) leads to a large chemical variety. Due to the allanite's high contents of Fe, it belongs to Ferrialanite. The pegmatite hosted deposit's domi-nant REE mineral is fergusonite as prismatic or subhedral grains associated with zircon, fluorite and karnasurtite. Geochemical composition of the fergusonite($YNbO_4$) suggests substitution of Y-REE and Y-Th in A-site, and Nb-Ta-Ti in B-site, furthermore the proportion of $Y_2O_3$ and $Nb_2O_5$ is oddly 1:1.5 comparing to the ideal ratio 1:1 and Nb is higher than Y, also A-site Y actively substitutes with REE. Karnasurtite in pegmatite variously ranges 9.16-22.88 wt% $Ce_2O_3$, 2.15-9.16 wt% and $La_2O_3$, 0.44-10.8 wt% $ThO_2$, as a calculated formula (Y, REE, Th, K, Na, Ca)$_{1.478}(Ti, Nb)_{1.304}$(Mg, Al, Mn, $Fe^{3+})_{0.988}$(Si, P)$_{1.431}O_7(OH)_4{\cdot}3H_2O$. Firstly the 870-860 Ma is the initial age of the supercontinent Rhodinia dispersal and subsequent A-1 type volcanism, which contains Fe, REE, and HFS(High Field Strength elements; Nb, Zr, Y etc.) elements in Fe-rich meta-volcanic rocks dominant Kyemyeongsan Formation, might mineralized allanite. Another synthesis is that regional metamorphism at late Paleozoic 300-280 Ma(Cho et al., 2002) might cause allanite mineralization. Also pegmatite REE mineralization highly related to the granite intrusion over the Chungju area in Jurassic(190 Ma; Koh et al., 2012). Otherwise above all, A-1 type volcanism at the same time of the Kyemyeongsan Formation development, regional metamorphism and pegmatite, might have caused REE mineralization. Although REE ore bodies display a close spatial association, each ore bodies display temporal distinction, different mineral assemblage and environment of ore formation.