• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.323-326
• /
• 2010

$(Zn_{1-x}Ca_x)_2SiO_4$:Mn phosphors doped with Ca were synthesized by solid state reaction method. $(Zn_{1-x}Ca_x)_2SiO_4$:Mn phosphors showed XRD patterns of Willemite structure. Also, $CaSiO_3$ structure and new peak near 610 nm in $(Zn_{1-x}Ca_x)_2SiO_4$:Mn with increasing value of x were observed from XRD and PL. The new peak near 610 nm in $(Zn_{1-x}Ca_x)_2SiO_4$:Mn with doping Ca was attributed to formation of $CaSiO_3$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.815-818
• /
• 2002

Mn doped hexagonal phase of ZnS has been studied as a yellow-orange phosphor for the application to fluorescent displays operated at low voltages. It was found that luminescence from $Mn^{2+}$ was increased as the Mn concentration was increased up to1.2 mol% of host lattice. This study has been attempted by adding trivalent ions such as $Al^{3+}$ or $Bi^{3+}$ to ZnS:Mn as an agent to do the efficient incorporation of Mn ions into ZnS:Mn lattice, resulting in a significant improvement in the phosphor performance, especially at low voltages.

• E2M - 전기 전자와 첨단 소재
• /
• 제4권1호
• /
• pp.1-11
• /
• 1991

소둔 및 급속응고된 FeA $l_{1-x}$M $n_{x}$ (x=0.05, 0.10, 0.15, 1.20, 0.25, 0.30, 0.35, 0.40) 합금의 자기적 성질을 77.deg.K~750.deg.K의 온도범위에서 비교 분석하였다. 소둔한 시편의 경우, x.leq.0.25일때는 상자성, x=0.30 및 0.35의 경우에는 초상자성, x=0.40은 강자성을 나타내었다. 그리고 급속응고한 시편의 경우에는 전 조성범위에서 초상자성을 나타내었다. 그리고 Mn의 양이 증가함에 따라 자화는 소둔 및 급속응고 시편에서 증가하는 현상을 보였으며 급속응고 시편이 소둔시편에 비해 대개 더 높은 자화를 나타내었다. 본 합금계에 있어 자성에 대한 국부환경 효과를 분석하여 보았다.다.

• 한국결정학회지
• /
• 제14권2호
• /
• pp.110-114
• /
• 2003

LiAl/sub 0.24/Mn/sub 1.76/O/sub 4-y/S/sub y/ (y=0, 0.02) were synthesized by the sol-gel method. Both structures were refined by Rietveld method, its structure refined as a cubic spinel, space group Fd-3m, a=8.17937(30) Å and 8.18331(19) Å respectively. Though it has been made a charge/discharge experiment above 20 times, there was no change of 3 V/4 V capacity degradation. It was considered that the volume change of MnO/sub 6/ octahedron induced by sulfur substitution plays a key role in keeping the 3 V/4 V capacity. The refined composition of the compound could be confirmed with the ICP analysis.

• 한국광물학회지
• /
• 제12권2호
• /
• pp.77-90
• /
• 1999

Characteristics and variations of chemical compositions in Co-rich crusts occurred in the EEZ of the Republic of Marshall Islands were reviewed. Correlation coefficient analysis, hierarchical cluster analysis, and Q-mode factor analysis for 62 samples were done in this study. All data were selected and gathered from the open file report of the cooperative cruise done by United States Geological Survey with Scripps Institute of Oceanography, University of Hawaii or Korea Ocean Research Development Institute. The average of crust thickness. Co content, and Ni content of 62 samples from the 21 seamounts were 30mm, 0.58 wt% and 0.40%, respectively. The mineral phases and associated elements assigned by correlation coefficients, cluster analysis and Q-mode factor analysis are following four. 1) CFA: P, Ca, CO2, Y, Sr: 2) Mn-oxide mineral: As, Mn, Co, Na: 3) Al-silicate mineral: Pd,Si, Al, Cu, Fe: 4) PGE-bearing mineral: Rh, Pt, Ir.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.459-462
• /
• 2001

Interface effects on properties of NTC thermistors having Mn-Co-O spinel crystal structure system are analyzed by a mixing rule in case of mixed types and layered types between CuO and Al$_2$O$_3$ added compounds. With adding CuO and Al$_2$O$_3$, The compounds form completely solid solution and their resistance and B constant are changed due to the variation of conduction electrons by their ionic substitutions. The properties of mixed NTC thermistors are depended on the logarithmic mixing rule by a dispersed phase and they show slightly lower values due to the lattice mixing affect in compared with calculated values. The resistance of layered NTC thermistors is depended upon the series mixing rule containing the value of an interface layer and effected by the variation of its thickness, and it is changed rapidly to the logarithmic mixing rule by the connection between two layers with increasing the interface layer

• 한국자기학회지
• /
• 제5권5호
• /
• pp.380-382
• /
• 1995

The pressure dependence of the Curie temperature was determined in 2-dimensional like ferromagnet, MnAlGe up to a maximum pressure of 7.5 Gpa through measurements of electric resistance vs temperature curves. The pressure coefficient was positive with a considerably high rate of 9 K/GPa in the low pressure ragion, while it decreased gradually down to one order of magnitude smaller value at the maximum pressure. It was concluded that ther is an upper limit of about 550 K in the super-exchange type ferromagnetic interaction between Mn layers.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.271-278
• /
• 1996

In this study, the effect of the transition elements on the microstructure and mechanical properties of rapidly solidified Al-Mg-X alloys was investigated. As a result of the rapid solidification processing, fine equiaxed grains with a mean diameter of 2 $\mu$m were observed in these alloys. Many fine particles were found to be distributed rather homogeneously throughout the matrix with relatively large particles occasionally at grain boundaries. The ultimate tensile strengths of Al-Mg-X alloys were found to decrease rather remarkably at 150 $^{\circ}C$ without the gain of the ductility at 150 $^{\circ}C$, which may result from segregation of $\beta$ ($Al_{3}Mg_{2}$) precipitates. Fine dimples were observed on the fracture surfaces for all alloy systems and the variation of the size and shape of dimples was not observed upon alloy systems. The ductility at 530 $^{\circ}C$ was found to be ~100%, suggesting that grain boundary sliding did not contribute to ductiliy despite he grain size stabilization. The absence of superplastic behavior may be associated with low boundary misorientation in rapidly solidified Al-Mg-X alloys.

• 한국광물학회지
• /
• 제17권4호
• /
• pp.309-325
• /
• 2004

연구는 호주 퀸즈랜드 주 북서부에 위치하는 은-납-아연 캔닝턴 광상은 호상편마암, 미그마타이트, 규선석-석류석 편암 그리고 각섬암으로 구성된 모암 주변부에서 발달해 있다. 모암에서 산출되는 규선석의 세 가지 다른 결정형태, 규선석을 포획광물로 함유한 아연-첨정석과 석류석 반상변정은 모암의 변성작용과 아연과 관련된 광화작용에 대한 지질학적 지시자로 사용되었다. 변성작용과 아연 광화작용과의 관계는 프로그램 THERMOCALC를 이용하여 KFMASH (K$_2$O-FeO-MgO-A1$_2$O$_3$-SiO$_2$- $H_2O$), KFMASHTO (K$_2$O-FeO-MgO-A1$_2$O$_3$-SiO$_2$-$H_2O$-TiO$_2$-Fe$_2$O$_3$), NCKFMASH ($Na_2$O-CaO-K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$) 그리고 MnNCKFMASH (MnO-$Na_2$O-CaO-K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$) 화학계에서 이들 세 가지 광물의 공생관계와 규선석-석류석-부분용융의 상평형 관계를 이용하여 결정하였다. MnNCKFMASH와 NCKFMASH계에서 부분 용융은 KFMASH와 KFMASHTO계에서 보다 낮은 온도에서 일어나며, MnNCKFMASH 계에서 용융 온도는 암석 화학 성분의 Na+Ca+K)의 비가 증가함에 따라 감소하는 경향을 보인다. 캔닝턴 광상의 모암은 MnNCKFMASH계의 경우 최고 온도와 압력 환경에서(634$\pm$62$^{\circ}C$, 4.8$\pm$1.3 kbar) 약 15% 용융되지만, KFMASHTO계하에서는 부분 용융이 일어나지 않는다. 규선석의 등변성도선과 모드 비의 변화를 근거로, 주상과 능면형의 규선석과 주상의 규선석을 포획하는 아연-첨정석 반상변정은 부분 용융을 포함하는 온도와 압력의 증가(약 550～$600^{\circ}C$, 2.0～3.0 kbar에서 700～75$0^{\circ}C$, 5.0～7.0 kbar)로 인한 것으로 생각된다. 또한 이와 같은 변성작용 동안의 최대 수축 변형 방향은 남-북 그 다음 동서 방향으로 주로 D$_1$과 D$_2$ 변형작용 동안에 형성되어졌다. 결론적으로 아연-첨정석의 성장과 관련된 아연 광화 작용은 D$_2$ 동안에 일어났고 그 후 부분 용융과 후기 변형/변성작용에 의해 재배치 또는 재농집 되어진 것으로 생각된다.

• 한국식품과학회지
• /
• 제27권3호
• /
• pp.318-323
• /
• 1995

제과회사 폐수처리의 화학적 응집공정을 최적화하기 위하여 이 연구를 수행하였다. 미처리 폐수의 $COD_{Mn}$과 총 고형분은 각각 $200{\sim}820ppm$과 $860{\sim}1360ppm$이었다. 폐수의 총 고형물의 성분은 당 40%, 단백질 10%, hexane-soluble 20%, 회분 30%였다. 650 nm에서의 turbidity와 suspended solid(SS)간에는 상관관계가 있었으므로, turbidity는 폐수의 on-line 측정도구로 사용할 수 있었다. 여러 응집제 중에서 $COD_{Mn}$과 SS 제거에 가장 효과적인 것은 $Al_2(SO_4)_3:Ca(OH)_2$의 조합 사용이었다. 최적의 $Al_2(SO_4)_3:Ca(OH)_2$ 농도는 480 ppm : 200 ppm이었다. 최적의 폐수처리 시간은$(Al_2(SO_4)_3$ 첨가 : $Ca(OH)_2$ 첨가 : 응집 숙성) 2 : 2 : 10분이었다. 이러 번의 $Al_2(SO_4)_3:Ca(OH)_2$ 처리공정은 gelatin과 계면활성제의 응집저해 현상을 극복할 수 있었으며, 미생물 슬러지의 첨가는 이 응집저해 물질들 제거에 도움이 되었다.