• 제목/요약/키워드: Mn12

검색결과 1,022건 처리시간 0.027초

Comparative Evaluation of Mn(II) Framework Substitution in MnAPSO-34 and Mn-impregnated SAPO-34 Molecular Sieves Studied by Electron Spin Resonance and Electron Spin Echo Modulation Spectroscopy

  • Gernho Back;Kim, Yanghee;Cho, Young-Soo;Lee, Yong-Ill;Lee, Chul-Wee
    • 한국자기공명학회논문지
    • /
    • 제6권1호
    • /
    • pp.20-37
    • /
    • 2002
  • MnAPSO-34 and Mn-impregnated SAPO-34(Mn-SAPO-34) sample were prepared with various manganese contents and studied by electron spin resonance(ESR) and electron spin echo modulation(ESEM). Electron spin echo modulation analysis of 0.07mo1 % Mn(relative to p) in MnAPSO-34 with adsorbed D$_{2}$O shows two deuteriums at 0.26 nm and two at 0.36 nm from Mn. This suggests that two waters hydrate an MnO$_{4}$ configuration with a D-O bond orientation for the waters as expect for a negatively charged site at low manganese content (0.1 mol%), the ESR spectra of MnAPSO-34 and MnH-SAPO-34 exhibit the same parameters(g 2.01 and A 89 G), but the spectra obtained from MnAPSO-34 samples are better resolved. The decomposition temperature of as-synthesized MnAPSO-34 were in the range of 200-600 $^{\circ}C$ of the morpholine which is 12 $^{\circ}C$ higher than that in as-synthesized MnH-SAPO-34. Infrared spectra showed that the position of a band at 3450 $cm^{-1}$ / shifted about 15 $cm^{-1}$ / toward higher energy in MnAPSO-34 versus MnH-SAPO-34. The modulation depth of the two-pulse ESE of MnAPSO-34 with adsorbed D$_{2}$O is deeper than that of MnH-SAPO-34 with adsorbed D$_{2}$O. Three-pulse ESEM of MnAPSO-34 and MnH-SAPO-34 with adsorbed deuterium oxide shows that the local environments of manganese in the hydrated samples are different, suggesting that Mn(II) is framework substituted in MnAPSO-34 since it obviously occupies an extraframework position in MnH-SAPO-34.

  • PDF

Comparative Evaluation of Mn Substitution in a Framework Site in MnAPSO-34 and Mn-impregnated SAPO-34 Molecular Sieves Studied by Electron Spin Resonance and Electron Spin-Echo Modulation Spectroscopy

  • Gernho Back;Cho, Young-Soo
    • 한국자기공명학회:학술대회논문집
    • /
    • 한국자기공명학회 2002년도 International Symposium on Magnetic Resonance
    • /
    • pp.80-80
    • /
    • 2002
  • MnPSO-34 and Mn-impregnated SAPO-34 (Mn-SAPO-34) sample were prepared with various manganese contents and studied by electron spin resonance (ESR) and electron spin-echo modulation (ESEM). Electron spin-echo modulation analysis of 0.07mol % Mn(relative to p) in MnAPSO-34 with adsorbed D$_2$O shows two deuteriums at 0.25 nm and two at 0.36 nm from Mn. This suggests that two waters hydrate an MnO4 configuration with a D-O bond orientation for the waters as expect for a negatively charged site at low manganese content (0.07 mol%), the ESR spectra of MnAPSO-34 and MnH-SAPO-34 exhibit the same parameters (g 2.02 and A 87 G), but the spectra obtained from MnAPSO-34 samples are better resolved. TGA of as-synthesized MnAPSO-34 shows that the decomposition temperature in the range 200-$600^{\circ}C$ of the morpholine is 12$^{\circ}C$ higher than that in as-synthesized MnH-SAPO-34. Infrared spectra shows that the position of a band at about 15 cm-1 toward higher energy in MnAPSO-34 versus MnH-SAPO-34. The modulation depth of the two-pulse ESE of MnAPSO-34 with absorbed D$_2$O is deeper than that of MnH-SAPO-34 with absorbed D$_2$O. Three-pulse ESEM of MnAPSO-34 and MnH-SAPO-34 with absorbed deuterium oxide shows that the local environments of manganese in the hydrated samples are different, suggesting that Mn(II) is framework substituted in MnAPSO-34 since it obviously occupies an extra-framework position in MnH-SAPO-34

  • PDF

플렉서블 Li/MnO2 일차전지의 제조공정에 따른 전기적 특성 (Electrical Characteristics According to the Manufacturing Process of the Flexible Li/MnO2 Primary Cell)

  • 이미재;채유진;김진호;황종희;박상선
    • 한국재료학회지
    • /
    • 제22권12호
    • /
    • pp.717-721
    • /
    • 2012
  • Manganese dioxide ($MnO_2$) is one of the most important cathode materials used in both aqueous and non-aqueous batteries. The $MnO_2$ polymorph that is used for lithium primary batteries is synthesized either by electrolytic (EMD-$MnO_2$) or chemical methods (CMD-$MnO_2$). Commonly, electrolytic manganese dioxide (EMD) is used as a cathode mixture material for dry-cell batteries, such as a alkaline batteries, zinc-carbon batteries, rechargeable alkaline batteries, etc. The characteristics of lithium/manganese-dioxide primary cells fabricated with EMD-$MnO_2$ powders as cathode were compared as a function of the parameters of a manufacturing process. The flexible primary cells were prepared with EMD-$MnO_2$, active carbon, and poly vinylidene fluoride (PVDF) binder (10 wt.%) coated on an Al foil substrate. A cathode sheet with micro-porous showed a higher discharge capacity than a cathode sheet compacted by a press process. As the amount of EMD-$MnO_2$ increased, the electrical conductivity decreased and the electrical capacity increased. The cell subjected to heat-treatment at $200^{\circ}C$ for 1 hr showed a high discharge capacity. The flexible primary cell made using the optimum conditions showed a capacity and an average voltage of 220 mAh/g and 2.8 V, respectively, at $437.5{\mu}A$.

프록시 모바일 IPv6 네트워크에서 3S를 고려한 도메인간 이동성관리 기법 (3S: Scalable, Secure and Seamless Inter-Domain Mobility Management Scheme in Proxy Mobile IPv6 Networks)

  • 강민;정종필
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권3호
    • /
    • pp.99-114
    • /
    • 2012
  • PMIPv6(Proxy Mobile IPv6)는 MN(Mobile Node)의 적극적인 참가를 요구하지 않는 네트워크 기반의 이동성 관리 방법으로 통신 및 인터넷 커뮤니티 사이에서 상당한 주목을 받고 있다. 그것은 낮은 핸드오버 지연을 유지하면서 다수의 MN를 지원할 수 있는 확장성 있는 PMIPv6 도메인의 구축방안은 여전히 연구가 진행 중에 있다. 본 논문에서는 확장성과 안전성 그리고 끊김없는 PMIPv6 도메인을 구축하기 위한 3S 접근 방식을 제안한다. 제안기법에서 모든 MAG(Mobility Access Gateway)는 LMA(Local Mobility Anchor)와 같은 역할을 하고 다른 MAG와 가상 링을 구성한다. 일관된 해싱은 각 MN과 모든 MAG의 MN의 LMA간 효율적인 분산 매핑에 사용된다. MAG와 MN은 대칭 키를 이용하여 인증한다. 수학적 분석을 통하여 3S의 안전성, 확장성 그리고 끊김없는 서비스를 검증한다. 또한 3S의 핸드오버 절차를 제안하고 이전의 기법에 비해 낮은 핸드오버 지연이 발생함을 보여 준다.

스피넬상 $Li{Mn_2}{O_4}$를 이용한 $CO_2$ 분해의 최적조건 (The Optimum of $CO_2$ Decomposition using Spinel Phase $Li{Mn_2}{O_4}$)

  • 이동석;임병오;양천회;이풍헌
    • 한국세라믹학회지
    • /
    • 제38권10호
    • /
    • pp.894-900
    • /
    • 2001
  • 이산화탄소 분해를 위한 촉매 $Li{Mn_2}{O_4}$는 졸-겔법에 의해서 망간아세테이트와 수산화리튬을 출발물질로 사용하여 $150^{\circ}C$의 공기분위기에서 12시간 동안의 건조과정과 $480^{\circ}C$에서 12시간 동안의 열처리과정을 통해서 합성하였다. 합성한 촉매를 수소환원시키기 위해서 다른 온도에서 수소($H_2$)로 3시간동안 환원하였고, 이 수소에 의해 환원된 촉매를 이용해 $300^{\circ}C$, $325^{\circ}C$, $350^{\circ}C$, $375^{\circ}C$, $400^{\circ}C$에서 이산화탄소($CO_2$) 분해율을 조사하였다. 실험결과 수소환원과 이산화탄소 분해의 온도최적조건은 $350^{\circ}C$임을 알 수 있었다. 합성촉매를 포함해 수소에 의한 환원과 이산화탄소분해 후 촉매에 대하여 XRD분석, SEM관찰, TGA 분석을 하였다.

  • PDF

Mn-Al-M(M=Cu, Fe) 합금계의 결정구조 및 자기적 성질 (Crystal structures and magnetic properties of Mn-Al-M (M=Cu, Fe) alloys)

  • 최원규;고관영;윤석길
    • 한국재료학회지
    • /
    • 제5권1호
    • /
    • pp.22-35
    • /
    • 1995
  • 본 연구는 Mn-Al 합금계에서 $\tau$상의 분율이 가장 높은 기준 조성을 결정하고 이 기준 조성중 Mn 원자의 일부를 Cu와 Fe 원자로 치환하였을 때 $\tau$상의 안정성과 자기적 성질의 변화를 조사하엿다. Mn-Al 합금계에서 $\tau$상의 분률과 자기적 특성이 가장 높은 조성은 $Mn_{0.56}Al_{0.44}$이었다. $Mn_{0.56-X}M_{X}Al_{0.44}$ 합금계의 결정구조는 M=Cu의 경우, 노냉시편과 소둔시편은 x $\leq$ 0.08 범위에서 $\tau$상과 $\beta$-Mn상이 나타났고, 0.10 $\leq x \leq$ 0.12 범위에서는 $\tau$상과 $\kappa$상이 나타났으며, 0.15 $\leq$ 0.20 범위에서는 $\kappa$상만이 존재하였다. 급속응고시편은 x=0.04에서 $\varepsilon$상과 $\tau$상이 공존하였고, x=0.06 및 x=0.08에서는 $\kappa$상과 $\tau$상이 공존하였으며 x=0.12와 x=0.20에서는 $\kappa$ 상만이 존재하였다. M=Fe의 경우, 노냉시편은 x < 0.08 범위에서 $\tau$상, $\beta$-Mn상 및 $\gamma_{2}$상이 나타났고, x > 0.10 범위에서는 $\kappa$상과 $\beta$-Mn$상이 나타났다. 급속응고시편은 x $\leq$ 범위에서는 $\varepsilon$상과 $\gamma_{2}$상이 나타났지만, 미량의 $\tau$상과 $\kappa$상도 존재함을 알 수 있었다. X=0.12와 x=0.20에서는 $\kappa$상만이 존재하엿다. $Mn_{0.56}Al_{0.44}$ 합금에서 노냉시편과 소둔시편의 포화자화값은 40-45(emu/g)이었으며 curie 온도는 약 650K였다. 급속응고 시편의 포화자화값은 약 50-52(emu/g), Curie 온도는 약 644K엿다. 소둔시편 및 급냉리본 모두 큰 잔류자화/포화자화 비(~0.7)를 나타냈으며, 특히 급냉리본의 경우 77K에서 큰 잔류자화값(~48emu/g)을 보여주었다. $Mn_{0.56-X}M_{X}Al_{0.44}$ 합금계의 자기장에 따른 자화값의 변화는 강자성이 형태를 보여주었고 자화값은 강자성과 $\tau$상과 $\kappa$상의 분율에 따라 결정되며 M=Cu일때, 최대자발자화값은 x=0.15에서 약 64.5(emu/g)이었다. M=Fe일 때 자화값은 x=0.15에서 최대자발자화값($\sigma_{0.0}$=66.4emu/g)이 나타났으며 $\tau$상 영역에서의 값보다 높았다. Curie 온도는 M=Cu, Fe에 관계없이 x가 증가함에 따라 감소하였다.

  • PDF

동시베리아해 대륙붕에서 산출되는 망가니즈단괴의 수심에 따른 형태학적·지화학적 특성 변화 (Variations in Morphological and Geochemical Characteristics in Manganese Nodules from the East Siberian Arctic Shelf with Varying Water Depths)

  • 구효진;조현구;이상미;임기택;김효임
    • 자원환경지질
    • /
    • 제56권1호
    • /
    • pp.1-11
    • /
    • 2023
  • 이번 연구에서는 2021년 ARA12B 탐사를 통해 동시베리아해 대륙붕의 서로 다른 수심을 갖는 2개의 정점에서 수집한 망가니즈단괴 440개[ARA12B-St52 (150 m, n = 239), ARA12B-St58i (73 m, n = 201)]에 대하여 형태학적·지화학적 분석을 수행하고, 수심에 따른 단괴의 특성 변화를 고찰하였다. 단괴의 크기는 두 정점 모두에서 3 cm 이상의 크기가 일반적이다. 그러나 단괴의 외형적 특징은 수심에 따라 크게 차이가 있다. 수심 150 m에서 획득된 단괴의 일반적인 형태는 거친 표면조직을 가지는 갈색-흑색의 판상형, 원통형 및 타원체형이다. 반면, 수심 73 m에서 회수된 단괴들은 매끄러운 표면을 가지는 노랑-갈색의 판상형 단괴가 대부분을 차지한다. 또한 단괴의 내부조직, 공극률 및 구성원소와 관련이 있는 크기와 무게 간 추세선의 기울기는 150 m의 단괴의 경우 약 1.60, 83 m 단괴는 약 0.84로 큰 차이가 있음이 확인되었다. 이는 단괴의 내부조직 및 화학조성에 차이로부터 기인한다. 단괴의 내부조직과 화학조성 분석 결과, 수심 150 m의 단괴들은 핵을 중심으로 두꺼운 Mn층과 얇은 Fe층들로 이루어진 반면, 83 m의 단괴들은 핵을 중심으로 얇은 Mn 및 Fe층이 교호하며 성장한다. 마이크로 X선 형광분석(µ-XRF)을 통해 단괴의 절개면에서 분석된 평균 화학조성은 150 m 단괴의 경우 Mn 40.6 wt%, Fe 5.2 wt%, Mn/Fe 비 7.9이며, 83 m 단괴의 경우 Mn 10.3 wt%, Fe 19.0 wt%, Mn/Fe 비 0.6이다. 타 해역 단괴들의 화학조성과 비교한 결과 수심 150 m에서 회수된 단괴의 조성은 태평양의 페루 분지의 단괴들과 유사한 반면, 83 m에서 획득된 단괴의 조성은 태평양의 쿡 섬 또는 발트해의 단괴들과 유사하다. 관찰된 단괴들의 형태학적·지화학적 특성은 두 정점에서 뚜렷한 차이를 나타내며, 이는 북극해 대륙붕의 수심에 따라 단괴의 형성 당시의 환경적 조건에 명확한 차이가 있음을 지시한다.

$La_{2/3}Sr_{1/3}MnO_3/BaFe_{12}O_{19}/SiO_2/Si(001)$ 입상형 다층박막 구조에서 강자성 $BaFe_{12}O_{19}$ 중간층이 저 자장 터널형 자기저항 특성에 미치는 영향 (The Influence of Ferromagnetic $BaFe_{12}O_{19}$ Layer for Low-Field Tunnel-Type Magnetoresistance on $La_{2/3}Sr_{1/3}MnO_3/BaFe_{12}O_{19}/SiO_2/Si(001)$ Granular-Type Multilayer Thin Films)

  • 심인보;안성용;이희민;유홍주;김철성;최세영
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2001년도 추계연구발표회 논문개요집
    • /
    • pp.48-49
    • /
    • 2001
  • PDF