• Journal of environmental and Sanitary engineering
• /
• v.2 no.3 s.3
• /
• pp.39-47
• /
• 1987

Breast milk samples collected from 8 areas of 59 lactating women were analysed by atomic absorption spectrophotometry for copper, zinc and manganese concentrations. The results were as follows; 1. The mean levels of Cu, Zn and Mn in the total samples were $342.6\pm138.9{\mu}g/l$ of Cu, $2.01\pm1.44mg/l$ of Zn and $8.67\pm5.12{\mu}g/l$ of Mn. 2. The mean Cu levels by lactation periods were $504.5\pm166.2{\mu}g/l$ in 1-4 weeks, $345.0\pm100.0{\mu}g/l$ in 5-12 weeks, $276.4\pm84.8{\mu}g/l$ in 13-36 weeks and indicated decreasing concentrations by the post-partus period progressed. (p<0.01) 3. The mean Zn levels were $3.50\pm2.10mg/1$ in 1-4 weeks, $2.08\pm0.79mg/1$ in 5-12 weeks, $1.38\pm0.91mg/l$ and showed the decline trend by the lactation periods. (p< 0.01) 4. The mean levels of Mn were $8.964\pm3.313{\mu}g/l$ in 1-4 weeks, $7.971\pm6.066{\mu}g/l$ in 5-12 weeks, $8.357\pm4.966{\mu}g/$ in 13-36 weeks and didn't indicate significant decreasing concentrations by the lactation periods.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.96-102
• /
• 2000

For the effective treatment of dyeing-complex wastewater, the most effective chemical coagulation method was studied. For the chemical coagulation of dyeing-complex wastewater, polyferric sulfate, $4Al_2(SO_4)_3$, PAC, ferrous sulfate, ferric sulfate, $FeCl_2$ and lime were used. It was investigated that polyferric sulfate was the most efficient coagulant. The optimal conditions and results for polyferric sulfate include the followings. When initial $COD_{Mn}$ concentration was 600mg/L, the optimal initial pH, dosage of coagulant, dosage of lime and PAA for $COD_{Mn}$ removal efficiency were 5, 1,200mg/L, 500mg/L and lmg/L, respectively. The optimal dosage of polyferric sulfate was increased proportionally to the influent $COD_{Mn}$ concentration.

• Journal of Korea Foundry Society
• /
• v.12 no.2
• /
• pp.139-148
• /
• 1992

The mechanical properties of Ti-Al intermetallic compounds which contain Mn, Zr, or Cr as the third element have been evaluated by means of hardness and compression tests. Microstructures have also been examined using an optical microscope. The cast structures of Ti-Al alloys are coarsened and the lamellar volume fraction is increased by the additions of Mn or V, but the cast structures are refined by the addition of Zr. Hardness tests of room temperature and compression tests at $600^{\circ}C$ showed that the mechanical properties of Ti-Al alloys were mainly dependent on the volume fraction of the ${\alpha}_2$ phase, grain size and solid solution hardening. However according to the compression test at $1000^{\circ}C$, the yield strength of Ti-Al alloys decreased with an increase in Mn or Cr content, but increased with an increase in the Zr content.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.134-139
• /
• 2000

The main objective of the present investigation is to show the feasibility of combinatorial chemistry by applying this method to phosphor syntehses. In this respect barium hexaaluminate phosphor was prepared by the split-pool combinatorial method, which enabled much more rapid search of optimum compositions of target phosphors than conventional synthetic methods. Barium hexaaluminate phosphors doped with Eu2+ exhibit blue emission while those co-doped with Mn2+ and Eu2+ exhibit green emission. Basically, the phosphor doped with 1.3 mole of Ba and 0.06~0.15 mole of Eu2+ exhibit the maximum value of emission intensity at 435${\mu}{\textrm}{m}$. Under the UV and VUV extitations, the barium hexaaluminate phosphor co-doped with Mn2+ and Eu2+ shows strong green emission.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.2
• /
• pp.43-49
• /
• 1997

Iron and manganese problems in ground water affect far more water systems than almost any other water quality concern. The purpose of this study is to find the optimum condition of ozonation for the removal of dissolved iron, manganese and other organics in the polluted ground water. We proposed 4mg/l, 8mg/l as optimum ozone dose for the removal of $Fe^{2+},{\;}Mn^{2+}$, respectively. The removal efficiencies of $COD_{Mn}$ and $COD_{Cr}$ in ozone dose of 2mg/l - 6mg/l were about 40-50%. The removal efficiency of $NH_{3}-N$ was about 30-40% at pH8.5. In conclusion, it needs further systematic study and research concerned to treatability of $Fe^{2+},{\;}Mn^{2+}$ and biodegradability of organic compounds using Ozonation followed by biological filtration process in ground water treatment train.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.2
• /
• pp.77-90
• /
• 1999

Characteristics and variations of chemical compositions in Co-rich crusts occurred in the EEZ of the Republic of Marshall Islands were reviewed. Correlation coefficient analysis, hierarchical cluster analysis, and Q-mode factor analysis for 62 samples were done in this study. All data were selected and gathered from the open file report of the cooperative cruise done by United States Geological Survey with Scripps Institute of Oceanography, University of Hawaii or Korea Ocean Research Development Institute. The average of crust thickness. Co content, and Ni content of 62 samples from the 21 seamounts were 30mm, 0.58 wt% and 0.40%, respectively. The mineral phases and associated elements assigned by correlation coefficients, cluster analysis and Q-mode factor analysis are following four. 1) CFA: P, Ca, CO2, Y, Sr: 2) Mn-oxide mineral: As, Mn, Co, Na: 3) Al-silicate mineral: Pd,Si, Al, Cu, Fe: 4) PGE-bearing mineral: Rh, Pt, Ir.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.116-119
• /
• 2003

$Ni_2$MnGa films, deposited on mica and glass substrates, were studied by ferromagnetic resonance (FMR) technology. The temperature-dependent resonance field was measured and a martensitic phase transformation (MT) was found between 310 and 340 K, exhibiting an abnormality on the curve. The easy axis is found to be in the film plane. The line width increases as a whole with decreasing temperature, which is discussed in terms of the motional narrowing mechanism. The resonance field was also measured as a function of orientation and the results were fitted, exhibiting a good consistence.

• Journal of Magnetics
• /
• v.10 no.3
• /
• pp.99-102
• /
• 2005

Modification in exchange bias of a NiFe/FeMn/NiFe trilayer, on introduction of a nonmagnetic Al layer at the top FeMn/NiFe interface, is investigated in multilayers prepared by rf magnetron sputtering. The introduction of Al layer leads to vanishing of bias of the top NiFe layer. But the bias for the bottom NiFe layer increases steadily with increasing Al layer thickness and attains bias (230 Oe) which is greater than that of the trilayer without the Al layer (150 Oe). When the top NiFe layer thickness is varied, exchange bias has highest value at 12 nm thickness for 1 nm thicknes of Al layer. Ion beam etching of the top NiFe layer also leads to an enhancement in bias for the bottom NiFe layer.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2001.05a
• /
• pp.12-12
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.453-454
• /
• 2001