• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.4
• /
• pp.323-326
• /
• 2010

$(Zn_{1-x}Ca_x)_2SiO_4$:Mn phosphors doped with Ca were synthesized by solid state reaction method. $(Zn_{1-x}Ca_x)_2SiO_4$:Mn phosphors showed XRD patterns of Willemite structure. Also, $CaSiO_3$ structure and new peak near 610 nm in $(Zn_{1-x}Ca_x)_2SiO_4$:Mn with increasing value of x were observed from XRD and PL. The new peak near 610 nm in $(Zn_{1-x}Ca_x)_2SiO_4$:Mn with doping Ca was attributed to formation of $CaSiO_3$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.815-818
• /
• 2002

Mn doped hexagonal phase of ZnS has been studied as a yellow-orange phosphor for the application to fluorescent displays operated at low voltages. It was found that luminescence from $Mn^{2+}$ was increased as the Mn concentration was increased up to1.2 mol% of host lattice. This study has been attempted by adding trivalent ions such as $Al^{3+}$ or $Bi^{3+}$ to ZnS:Mn as an agent to do the efficient incorporation of Mn ions into ZnS:Mn lattice, resulting in a significant improvement in the phosphor performance, especially at low voltages.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.1-11
• /
• 1991

소둔 및 급속응고된 FeA $l_{1-x}$M $n_{x}$ (x=0.05, 0.10, 0.15, 1.20, 0.25, 0.30, 0.35, 0.40) 합금의 자기적 성질을 77.deg.K~750.deg.K의 온도범위에서 비교 분석하였다. 소둔한 시편의 경우, x.leq.0.25일때는 상자성, x=0.30 및 0.35의 경우에는 초상자성, x=0.40은 강자성을 나타내었다. 그리고 급속응고한 시편의 경우에는 전 조성범위에서 초상자성을 나타내었다. 그리고 Mn의 양이 증가함에 따라 자화는 소둔 및 급속응고 시편에서 증가하는 현상을 보였으며 급속응고 시편이 소둔시편에 비해 대개 더 높은 자화를 나타내었다. 본 합금계에 있어 자성에 대한 국부환경 효과를 분석하여 보았다.다.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.110-114
• /
• 2003

LiAl/sub 0.24/Mn/sub 1.76/O/sub 4-y/S/sub y/ (y=0, 0.02) were synthesized by the sol-gel method. Both structures were refined by Rietveld method, its structure refined as a cubic spinel, space group Fd-3m, a=8.17937(30) Å and 8.18331(19) Å respectively. Though it has been made a charge/discharge experiment above 20 times, there was no change of 3 V/4 V capacity degradation. It was considered that the volume change of MnO/sub 6/ octahedron induced by sulfur substitution plays a key role in keeping the 3 V/4 V capacity. The refined composition of the compound could be confirmed with the ICP analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.2
• /
• pp.77-90
• /
• 1999

Characteristics and variations of chemical compositions in Co-rich crusts occurred in the EEZ of the Republic of Marshall Islands were reviewed. Correlation coefficient analysis, hierarchical cluster analysis, and Q-mode factor analysis for 62 samples were done in this study. All data were selected and gathered from the open file report of the cooperative cruise done by United States Geological Survey with Scripps Institute of Oceanography, University of Hawaii or Korea Ocean Research Development Institute. The average of crust thickness. Co content, and Ni content of 62 samples from the 21 seamounts were 30mm, 0.58 wt% and 0.40%, respectively. The mineral phases and associated elements assigned by correlation coefficients, cluster analysis and Q-mode factor analysis are following four. 1) CFA: P, Ca, CO2, Y, Sr: 2) Mn-oxide mineral: As, Mn, Co, Na: 3) Al-silicate mineral: Pd,Si, Al, Cu, Fe: 4) PGE-bearing mineral: Rh, Pt, Ir.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.459-462
• /
• 2001

Interface effects on properties of NTC thermistors having Mn-Co-O spinel crystal structure system are analyzed by a mixing rule in case of mixed types and layered types between CuO and Al$_2$O$_3$ added compounds. With adding CuO and Al$_2$O$_3$, The compounds form completely solid solution and their resistance and B constant are changed due to the variation of conduction electrons by their ionic substitutions. The properties of mixed NTC thermistors are depended on the logarithmic mixing rule by a dispersed phase and they show slightly lower values due to the lattice mixing affect in compared with calculated values. The resistance of layered NTC thermistors is depended upon the series mixing rule containing the value of an interface layer and effected by the variation of its thickness, and it is changed rapidly to the logarithmic mixing rule by the connection between two layers with increasing the interface layer

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.380-382
• /
• 1995

The pressure dependence of the Curie temperature was determined in 2-dimensional like ferromagnet, MnAlGe up to a maximum pressure of 7.5 Gpa through measurements of electric resistance vs temperature curves. The pressure coefficient was positive with a considerably high rate of 9 K/GPa in the low pressure ragion, while it decreased gradually down to one order of magnitude smaller value at the maximum pressure. It was concluded that ther is an upper limit of about 550 K in the super-exchange type ferromagnetic interaction between Mn layers.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.271-278
• /
• 1996

In this study, the effect of the transition elements on the microstructure and mechanical properties of rapidly solidified Al-Mg-X alloys was investigated. As a result of the rapid solidification processing, fine equiaxed grains with a mean diameter of 2 $\mu$m were observed in these alloys. Many fine particles were found to be distributed rather homogeneously throughout the matrix with relatively large particles occasionally at grain boundaries. The ultimate tensile strengths of Al-Mg-X alloys were found to decrease rather remarkably at 150 $^{\circ}C$ without the gain of the ductility at 150 $^{\circ}C$, which may result from segregation of $\beta$ ($Al_{3}Mg_{2}$) precipitates. Fine dimples were observed on the fracture surfaces for all alloy systems and the variation of the size and shape of dimples was not observed upon alloy systems. The ductility at 530 $^{\circ}C$ was found to be ~100%, suggesting that grain boundary sliding did not contribute to ductiliy despite he grain size stabilization. The absence of superplastic behavior may be associated with low boundary misorientation in rapidly solidified Al-Mg-X alloys.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.309-325
• /
• 2004

The Cannington Ag-Pb-Zn deposit, northwest Queensland, Australia developed around the host rocks composing banded and migmatitic gneisses, sillimanite-garnet schist and amphibolite. Three crystal habits of sillimanite, gahnite (Zn-spinel) and garnet porphyroblasts occurred on the host rocks of the Cannington deposit could be used to delineate metamorphism that closely associated with Zn-mineralization in the deposit. Linkages the metamorphism to Zinc-mineralization is determined in four chemical systems, KFMASH (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$), KFMASHTO (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$-TiO$_2$-Fe$_2$O$_3$), NCKFMASH (Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$) and MnNCK-FMASH (MnO-Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$), using THERMOCALC program (version 3.1; Powell and Holland 1988). Partial melting in MnNCKFMASH and NCKFMASH systems occurs at lower temperature than in the KFMASH and KFMASHTO systems. The partial melting temperature decreases with increasing of Na/(Na+Ca+K) of the bulk rock compositions in the MnNCKFMASH system. The host rocks have melted ca 15 vol.% in the MnNCKFMASH system at peak metamorphic conditions (634$\pm$62$^{\circ}C$ and 4.8$\pm$1.3 kbar), but partial melting have not occurred in KFMASHTO system. Based on calculations of sillimanite isograd in different systems and sillimanite modal pro-portion, prismatic and rhombic sillimanite and gahnite porphyroblasts including prismatic sillimanite inclusion probably have resulted from pressure and temperature increasing through partial melting (from 550～$600^{\circ}C$, 2.0～3.0 kbar to 700～75$0^{\circ}C$, 5.0～7.0 kbar), furthermore have experienced N-S then W-E crustal shortening during D$_1$ and D$_2$ deformation. Consequently, Zinc mineralization related to gahnite growth occurred during D$_2$ and was redistributed and upgraded by partial melting and retrograde metamorphism into structural and rheological sites during shearing in D$_3$.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.318-323
• /
• 1995

To improve wastewater treatment in a confectionery factory and to optimize chemical coagulation process, this study was performed. $COD_{Mn}$ and total solid of untreated wastewater were $200{\sim}820ppm\;and\;860{\sim}1350ppm$, respectively. Composition of total solid was sugar 40%, protein 10%, hexane-soluble 20%, and ash 30%. Turbidity at 650 nm and the amount of suspended solid (SS) showed correlation, thus turbidity could be used for the on-line measurement of SS. The most effective combination of coagulants for the removal of $COD_{Mn}$ and SS was that of $Al_2(SO_4)_3\;and\;Ca(OH)_2$. The optimal concentration of $Al_2(SO_4)_3\;and\;Ca(OH)_2$ was 480 ppm and 200 ppm, respectively. Optimal retention time of wastewater for $Al_2(SO_4)_3$ addition $Ca(OH)_2$ addition : flocculation was 2 : 2 : 10 min. Multiple treatment of $Al_2(SO_4)_3:Ca(OH)_2$ overcame coagulation inhibition by gelatin and detergent, and addition of microbial sludge reduced it.