• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.718-726
• /
• 2007

There are many varieties of asbestos: chrysotile, crocidolite, amosite, tremolite, actinolite, and anthophylite. These are widely used in construction materials, brake lining, textile, and so on. Even though non-asbestos fibers such as glassfiber and rockwool have manufactured because asbestos causes asbestosis, lung cancer, mesothelioma, etc., some bad effects of non-asbestos have been also reported. PCM (phase contrast microscopy) and PLM (polarized light microscopy) have been used to qualitatively analyze asbestoses. These techniques have serious drawbacks when identifying and separating various asbestoses. Recently scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDX) has been known as an useful tool to analyze airborne particle since it provides physical and chemical information simultaneously. The purpose of the study was to classify both asbestos and non-asbestos fibers and finally to develop their source profiles by using the SEM/EDX. The source profiles characterized by 6 different types of asbestos fibers and 2 types of non-asbestos fibers had been developed by analyzing a total of 380 fibers. Analytical parameters used in this study were length, width, aspect ratio, and shape as physical information, and Na, Mg, Al, Si, K, Ca, Cr, Mn, Fe, and Cu as chemical information. All the parameters were intensively reviewed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.68-68
• /
• 2000

펄스레이저 증착법(이하 PLD)을 이용하여 마이크로파 유전체 소자 및 절연 산화막으로의 응용을 위한 MgTiO3 박막을 다양한 기판상에서 증착하였다. 사파이어 기판에 (a,c-plane Al2O3) 성장된 MgTiO3 박막은 에피텍셜 성장(epitaxial growth)이 되었으며, SiO2/Si 및 Pt/Ti/Si 기판위세 성장된 MgTiO3 박막의 경우 003방향으로 배향(oriented) 되었다. MgTiO3 박막은 450~75$0^{\circ}C$까지 기판온도를 변화시키면서 증착시켰으며, 증착시 산소분압은 50~200 mTorr로 변화시켰다. PLD 증착시 타켓에 조사된 레이저 에너지 밀도는 약 2J/cm2였으며, MgTiO3 박막 증착후 200Torr O2 분위기에서 상온까지 1$0^{\circ}C$/min 의 속도로 냉각시켰다. 사파이어 c-plane 상에서 일머나잇(ilminite) MgTiO3 구조가 55$0^{\circ}C$ 에피텍셜 성장하는 것을 관찰할 수 있었으며, 사파이어 a-plane 상에서는 MgTiO3 구조가 $650^{\circ}C$ 이상부터 110방향으로 배향되며 성장하였다. $600^{\circ}C$ 이상에서 c-축으로 배향된 구조를 갖고 있었다. 증착된 MgTiO3 박막의 조성분석(stoichio metric analysis)을 위해 RBS 분석을 수행하여, 증착에 이용된 타켓과 동일한 조성을 갖는 MgTiO3 박막이 성장된 것을 확인할 수 있었다. 사파이어 기판상에 증착된 MgTiO3 박막은 가시영역에서 투명하였으며, 약 270nm 파장을 갖는 영역에서 급격한 흡수단을 보였다. 이때의 MgTiO3 박막은 AFM 분석을 통해 약 0.87mn rms roughness 값을 갖는 매우 평탄한 표면구조를 갖고 있는 것을 확인하였다. MIM(Pt/MgTiO3/Pt) 구조의 캐패시터를 형성시켜 MgTiO3 박막의 유전특성(dielectric properties)을 관찰하였다. PLD로 성장된 MgTiO3 박막의 유전율(relative dielectric constant)은 약 22였으며, 1MHz에서 약 1.5%의 유전손실(dielectirc loss) 값을 보였다. 또한 이때 MgTiO3 박막은 낮은 유전분산값을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.9-9
• /
• 2009

Coated conductor is required to have good critical current property for high efficiency of electric power applications. Until now, long coated conductor does not show high Jc over 3 MA/$cm^2$ in thick superconducting layer because of texture degradation by thick superconducting layer. In this study, in order to overcome this issue, thicker superconducting layer was deposited with optimized conditions to reduce the degradation of critical current density. SmBCO superconducting coated conductor was deposited with 1~3 um of thickness at $750\sim850^{\circ}C$ under 15~20 mTorr of oxygen partial pressure using batch type EDDC( evaporation using drum in dual chamber). The buffered substrate for superconducting layer deposition was used IBAD-MgO template with the architecture of $LaMnO_3/MgO/Y_2O_3/Al_2O_3$/Hastelloy. After fabrication of coated conductor, critical current was measured by 4-prove method under self-magnetic field and 77K. In addition, surface morphology and texture were analyzed by SEM and XRD, respectively. 3 um thick SmBCO coated conductor shows highest $I_C$ values of 638A/cm-w in 1 m long in the world.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.1-2
• /
• 2009

The high critical current ($I_c$, A) of SmBCO coated conductor in a magnetic field, the high production rate and the high material yield are promising for applications. The inhomogeneity of Ie at the long length coated conduct is very important problem for electric application. So we researched the reason of inhomogeneity of $I_c$ at long length tape prepared by batch type co-evaporation system called by EDDC. The long length SmBCO coated conductors were developed on $LaMnO_3/IBAD-MgO/Y_2O_3/Al_2O_3$/Hastelloy C276 template. The distribution of $I_c$ are from 0 to 397 A/cm at 77 K and self field. We have studied the microstructures of these films by using SEM, EDS and X-ray diffraction. The XRD and composition by EDS results of SmBCO film reveals subtle difference. But, the microscopic observation by SEM show the microcrack at the sample with low $I_c$.

• 동굴
• /
• 제21권22호
• /
• pp.17-56
• /
• 1990

Cheju Island, which was formed by volcanic activity, is an oval in its shape with the major axis of 80km and the minor axis of 40km. The island holds in its heart Mt. Hanla rising 1,950m above the sea. Petrological study of this volcanic island has been made actively by Sang-Man Lee, Chong-Kwan won and Moon-Won Lee. The chronological measurements of the island by Chong-Kwan Won and Moon-Won Lee showed that it is composed of Sanbangsan trachytes and Backlokdam trachytes(25,000 year ago). These reports are based on the chemical analysis and the rediometric chronological measurements on the ground. However, there has been no reports about the inside of caves. We made an (composition) analysis of the inside of Manjang Cave by the fundamental parameter method in X-ray fluorescence spectrometry. The fundamental parameter method in X-ray fluorescence spectrometry is nondestructive analysis, and it enables us to make the values processed by a computer. The results obtained by this methods are as follows : SiO$_2$(49％), $Al_2$O$_3$(17％), Fe$_2$O$_3$(13％), CaO(8.1％), MgO(5.5％), Na$_2$O(3.6％), TiO$_2$(2.1％), $K_2$O(0.86％), P$_2$O$_{5}$(0.28％), and MnO(0.20％), respectively. The data obtained by the fundamental parameter method in X-ray fluorescence was compared with the data provided by Chong-Kwan and Moon-Won Lee. Our measurement was made by K-Ar-method in cooperation with T.ITAYA. The samples are of 30,000～420,000 year ago. The composition of the values of our underground analysis with the existing values obtained by the analyses on the ground produced new data about Cheju volcanic island.d.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.233-238
• /
• 2003

Ferromagnetic tunnel junctions, Ta/Cu/Ta/NiFe/Cu/$Mn_{75}$ $Ir_{25}$ $Co_{70}$ $Fe_{30}$/Al-oxide, were fabricated by do magnetron sputtering and plasma oxidation process. The effect of annealing temperature on the local transport properties of the ferromagnetic tunnel junctions was studied using contact-mode Atomic Force Microscopy (AFM). The current images reflected the distribution of the barrier height determined by local I-V analysis. The contrast of the current image became more homogeneous and smooth after annealing at $280^{\circ}C$. And the average barrier height $\phi_{ave}$ increased and its standard deviation $\sigma_{\phi}$ X decreased. For the cases of the annealing temperature more than $300^{\circ}C$, the contrast of the current image became large again. And the average barrier height $\phi_{ave}$ decreased and its standard deviation $\sigma_{\phi}$ increased. Also, the current histogram had a long tail in the high current region and became asymmetric. This result means the generation of the leakage current that is resulted from the local generation of a low barrier height region. In order to obtain the high tunnel magnetoresistance(TMR) ratio, the increase of the average barrier height and the decrease of the barrier height fluctuation must be strictly controlled.led.

• 한국식품조리과학회지
• /
• 제16권5호
• /
• pp.425-430
• /
• 2000

우리 나라에서 재배하여 생산한 식용 지하 부위 채소들(감자, 고구마, 당근, 무, 양파, 마늘)의 생산지역에 따른 무기질 성분의 차이와 중금속 함유 여부를 알아보기 위하여 그 성분을 분석하였다. 먼저 microwave digestion oven에서 시료를 HNO$_3$ 4ml(65%)과 $H_2O$$_2$1ml(30%)로 용액 화하여 hot plate에서 시료를 1 ml까지 휘발시켜서 1% HNO$_3$로 희석한 후 ICP-AES로 무기질 성분을 정성, 정량 분석하였다. 모든 시료에서 가장 많이 분석된 무기성분은 K이었으며 각각의 성분 함유도는 모든 시료마다 다르게 나타났다. 감자는 다른 식용지하 부위 채소에 비해 Na와 Fe의 함량이 상대적으로 낮게 분석되었는데 K, P, Mg순의 함량을 보였고 K은 김포 지방산이, Ca는 삼척 지방산이 많이 함유한 것으로 조사되었다. 고구마는 분석한 거의 모든 지역에서 Ca 함량이 감자의 두 배 이상으로 높게 나타났다. 당근은 Na 함량이 다른 채소에 비해 높았으며 특히 진부 지방산이 많이 함유하고 있었다. 무는 K, Ca, P, Mg 순으로 함량이 높았는데 특히 양구 지방산이 높게 나타났다. 또한 Ca의 함량이 높았는데 감자의 5-8배였고, 다른 지하 부위 채소와 비교하여도 2-3배 이상이었다. 양파는 K, P Ca의 함량이 타 채소에 비해 낮게 분석되었었는데 지역별 차이는 많지 않았으며 문경 지방산이 Ca의 함량이 높았다. 마늘의 경우 K의 함량은 의성 지방산이, Ca의 함량은 서산 지방산이 높았으며 K과 P의 함량이 상대적으로 높았다.

• Applied Biological Chemistry
• /
• 제35권2호
• /
• pp.82-86
• /
• 1992

복숭아로부터 polyphenoloxidase를 추출하여 polyphenol 화합물인 caffeic acid, hydroxyhydroquinone, homocatechol 그리고 pyrogallol과 반응시켜 얻어진 4종류의 효소적 갈변반응 생성물의 생리작용을 검토한 결과 rec-assay와 돌연변이원성시험에서 돌연변이원성을 나타내지 않았다. 4종류의 시료모두 S-9Mix를 첨가한 돌연변이원성 억제활성 실험에서 B(a)p, Trp-P-1의 변이물질에 대한 Ca-PEBRP와 HCa-PEBRP가 80% 이상의 강한 돌연변이원성 억제활성을 나타내었음을 알 수 있었다. 또한 rec-assay에서도 강한 대조구인 MMC와 MNNG에 대해 Py-PEBRP경우 생육저지대차를 17 mm에서 5 mm로 감소시켜 돌연변이 억제활성이 있는 것으로 나타났고, Hca-PEBRP, HHQ-PEBRP 그리고 Py-PEBRP에 $Zn^{2+}$의 첨가로 생육저지대의 차가 5 mm로써 DNA 손상에 영향을 미치는 것으로 나타났다.

• 한국수산과학회지
• /
• 제11권3호
• /
• pp.139-146
• /
• 1978

The annual variations of some heavy metal concentrations, Al, Mn, Fe, Cu, Pb, Zn, Cd, Hg were determined on tile day of spring tides in every month from May 1977 to April 1978 at eight stations in the Nagdong River downstream. Samples were taken at intervals of one or two hours from 7 a.m. to 7 p.m. at each station. Annual ranges and means of concentrations of the heavy metals are as follows : aluminium 40.7-3700 ppb, 286 ppb; manganese 10.3-261.5 ppb, 80.8 ppb; iron ND-1237 ppb, 147.7 ppb; copper ND-30.9 ppb, 2.49 ppb; lead ND-29.9 ppb, 1.10 ppb; zinc ND-156.8 ppb, 5.61 ppb; cadmium ND-1.22 ppb, 0.09 ppb; mercury ND-0.37 ppb, 0.02 ppb respectively. In general, the contents of heavy metals except managanese and mercury were higher at the stations above station one, Kupo, though the ranges of the contents showed remarkable difference according to the sampling stations. Annual means of the concentrations of iron and manganese were exceeded already the desirable standards for industrial water and closed to the criteria of raw water for public supply. The values that over the criteria of raw water were sometimes found. Mercury concentration showed comparative high level such as ND-0.37 ppb in annual range but it was not over the environment criterion, 0.5 ppb. Aluminium, iron and mercury showed generally high values in summer period and other metals in winter period, through the patterns of seasonal variations were difference depending on the sampling stations and the kind of metals.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.109-122
• /
• 2018

This study was conducted to investigate the removal characteristics of heavy metals and sulfate ion from acid mine drainage by porous zeolite-slag ceramics (ZS ceramics) that was prepared by adding wood flour as pore-foaming agent while calcining the mixtures of natural zeolite and converter slag. The batch test showed that the removal efficiency of heavy metals by pellet-type porous ZS ceramics increased as the particle size of wood flour was decreased and as the weight mixing ratio of wood flour to ZS ceramics was increased. The optimal particle size and weight mixing ratio of wood flour were measured to be $75{\mu}m$ and 7~10%, respectively. The removal test with the porous ZS ceramics prepared in these optimal condition showed very high removal efficiencies: more than 98.4% for all heavy metals and 73.9% for sulfate ion. Relative to nonporous ZS ceramics, the increment of removal efficiency of heavy metals by porous ZS ceramics with $75{\mu}m$ and 10% wood flour was 5.8%, 60.5%, 36.9%, 87.7%, 10.3%, and 57.4% for Al, Cd, Cu, Mn, Pb, and Zn, respectively. The mechanism analysis of removal by the porous ZS ceramics suggested that the heavy metals and sulfate ion from acid mine drainage are eliminated by multiple reactions such as adsorption and/or ion exchange as well as precipitation and/or co-precipitation.