• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.48-54
• /
• 2000

In this study the characteristics of chip formation of the cold drawn Bi-S free machining steels were assessed. And for comparison those of the cold drawn Pb-S free machining steel the hot rolled low carbon steel which has MnS as free machining inclusions and the conventional steels were also investigated. During chip formation the cold drawn free machining steels show relatively little change in thickness and width of chip compare to those of the conventional carbon steels. And a single parameter which indicates the degree of deformation during chip formation chip cross-section area ratio is introduced. The chip cross-section area ratio is defined as chip cross-section area is divided by undeformed chip cross-section area. The variational patters of the chip cross-section area ratio of the materials cut are similar to those of the shear strain values. The shear stress however seems to be dependent on the carbon content of the materials. The cold drawn Bi-S and Pb-S steels show nearly the same chip forming behaviors and the energy consumed during chip formation is almost same. A low carbon steel without free machining aids shows poor chip breakability due to its high ductility. By introducing a small amount of free machining inclusions such as MnS Bi, Pb or merely increasing carbon content the chip breakability improves significantly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.351-356
• /
• 1999

In this study, the characteristics of chip formation of the cold drawn Bi-S free machining steels were assessed. And for comparison, those of the cold drawn Pb-S free machining steel, the hot rolled low carbon steel which has MnS as free machining inclusions and the conventional steels were also investigated. During chip formation, the cold drawn free machining steels show relatively little change in thickness and width of chip compare to those of the conventional carbon steels. And a single parameter which indicates the degree of deformation during chip formation, 'chip cross-section area ratio' is introduced. The chip cross-section area. The variational patterns of cross-section area is divided by undeformed chip cross-section area. The variational patterns of the chip cross-section area ratio of the materials cut are similar to those of the shear strain values. The shear stress, however, seems to be dependent on the carbon content of the materials. The cold drawn BiS and Pb-S steels show nearly the same chip forming behaviors and the energy consumed during chip formation is almost same. A low carbon steel without free machining aids shows poor chip breakability due to its high ductility. By introducing a small amount of non-metallic inclusions such as MnS, Bi, Pb or merely increasing carbon content the chip breakability improves significantly.

• The Plant Pathology Journal
• /
• v.28 no.4
• /
• pp.446-452
• /
• 2012

The effect of heavy metals on seedling growth and pigment levels was studied in Arabidopsis using essential (Cu, Mn, and Zn) and non-essential metals (Pb and Hg). Generally increasing the concentrations of the metals resulted in a gradual decrease in root and shoot lengths, a decrease in chlorophylls, an increase in anthocyanins and a fluctuation in carotenoid content depending on the metal types. The toxicity of the metals decreased in the following order: Cu > Hg > Pb > Zn > Mn. Among the five metals, Cu was exceptionally toxic and the most potent inducer of anthocyanins. Pb induced the smallest quantity of anthocyanins but it was the strongest inducer of carotenoids. It suggests that the Cu-stressed Arabidopsis may use anthocyanins as its main antioxidants while the Pb-stressed Arabidopsis use carotenoids as its main protectants. All of the five metals induced an accumulation of anthocyanins. The consistent increase in anthocyanin content in the metal-stressed Arabidpsis indicates that anthocyanins play a major role in the protection against metal stresses.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.1
• /
• pp.64-69
• /
• 2002

To know a degree of pollution in agricultural products cultivated around 4 unworked mines located in Chollanam-Do, we investigated a concentration of heavy metal and trace metal to provide the basic data for its residual limits. 28 samples of seven kinds of agricultural products(lettuce, onion, potato, radish, pepper, pumpkin, bean) collected from 4 unworked mines located in Chollanam-Do in 2001 were analyzed by Mercury Analyzer for mercury and Atomic Absorption spectrophotometer for Pb, As, Cd, Cu, Mn, and Zn. Hg contents were detected N.D. ∼trace level(0.01 ppm and less) and As content were detected N.D. ∼ 0.029 lpm but most of same)leE were not detected. Cd contents were detected N.D∼0.124 ppm. The results of Hg, As, Pb and Cd content showed that for all the 7 species of agricultural products studied, none have accumulated levels dangerous enough to Pose health problems. The average contents of Cu were 3.070 ∼ 7.825 ppm in bean, the Mn were 3.688 ∼23.935 ppm in lettuce ailed the Zn were 5.690 ∼21.171 ppm in bean, respectively.

• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.41-45
• /
• 1974

A study was carried out to determine the content of Mn and Cr in the ground water in Seoul area, where municipal water supply system was not installed, from Nov. 1 to Nov. 30, 1973. In this study, authors examined the hardness, pH, water temperature and Cl ion to investigate the general conditions of the ground water. For this study, samples were collected from 46 wells which were located in outpart of Seoul city, and Mn and Cr were determined with the Spectronic-20. The following results were obtained: 1) Average value of the ground water conditions of the wells were 13.3$\circ$C in temperature, pH 6.3, hardness 159 ppm and Cl ion 41 ppm. 2) In the manganese concentration, the highest area was Yeongdeungpo-Ku(0.318 ppm), while the lowest area was Sungbuk-Ku(0.065 ppm) and the mean concentration of the whole district was 0.196 ppm. 3) In the chrome concentration, the highest area was Yeongdeungpo-Ku(0.031 ppm), while the lowest area was Dobong-Ku (trace) and the mean concentration of the whole district was 0.012 ppm.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.361-364
• /
• 2018

Binary Ti-Al alloys below 51.0 mass%Al content exhibit a breakaway, transferring from parabolic to linear rate law. The second $Al_2O_3$ layer might have some protectiveness before breakaway. Ti-63.1 mass%Al oxidized at 1173 K under parabolic law. Breakaway oxidation is observed in every alloy, except for Ti-63.1 mass%Al. After breakaway, oxidation rates of the binary TiAl alloys below 34.5 mass%Al obey almost linear kinetics. The corrosion rate of Ti-63.1 mass%Al appears to be almost parabolic. As content greater than 63.0 mass% is found to be necessary to form a protective alumina film. Addition of Mo improves the oxidation resistance dramatically. No breakaway is observed at 1123 K, and breakaway is delayed by Mo addition at 1173 K. At 1123 K, no breakaway, but a parabolic increase in mass gain, are observed in the Mo-added TiAl alloys. The binary Ti-34.5 mass%Al exhibits a transfer from parabolic to linear kinetics. At 1173 K, the binary alloys show vary fast linear oxidation and even the Mo-added alloys exhibit breakaway oxidation. The 2.0 mass%Mo-added TiAl exhibits a slope between linear and parabolic. At values of 4.0 and 6.0 mass% added TiAl alloys, slightly larger rates are observed than those for the parabolic rate law, even after breakaway. On those alloys, the second $Al_2O_3$ layer appears to be persistently continuous. Oxidation resistance is considerably degraded by the addition of Mn. Mn appears to have the effect of breaking the continuity of the second $Al_2O_3$ layer.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.698-702
• /
• 2005

Dielectric and Piezoelectric properties of complex perovskite 0.92Pb($Zr_{1/2}Ti_{1/2})O_{3}-(0.08-x)Pb(Cu_{1/3}Nb_{2/3})O_{3}-xPb(Mn_{1/3}Nb_{2/3})O_{3}(0{\leq}x{\leq}0.080$) (PZT-PCN-PMN) system were investigated as a function of PMN content. With the increase of PMN content of the sintered specimens, tetragonal phase was coexisted with rhombohedral phase, the dielectric constant was decreased, mechanical quality factor ($Q_{m}$) was inceased, and optimal sintering temperature was increased up to 1050$^{\circ}C$. For the composition of x = 0.064 sintered at 1050$^{\circ}C$ for 2 h, 1939 of maximum mechanical quality factor ($Q_{m}$), 57$\%$ of electromechanical coupling factor ($k_{p}$), and 1100$^{\circ}C$ of dielectric constant, 0.37$\% $ of dielectric loss (tan $\delta$) were obtained.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.197-206
• /
• 2015

Failure analysis of pre-insulated pipe (SPPS 380, 400A) transporting high temperature water ($95{\sim}110^{\circ}C$) for a plant was carried out. The damaged area (${\Phi}5mm$) of pre-insulated pipe was found only on welds. The chemical composition of damaged pipe meets specification of carbon steel pipes for pressure service (KS D 3562). As results of microstructure analysis, crack propagated from outer to inside after pitting corrosion occurred on the outside surface. The non-metallic inclusion existed on the end of crack. And the non-metallic inclusion continuously and linearly formed along with the bond line of welds. Based on SEM-EDS analysis, the nonmetallic inclusions have higher Manganese (Mn) and Oxygen (O) content but sulfur (S) was not detected. As results of water quality analysis, hydrogen ion concentration and minerals like Fe, Mg, Si were in low level. But the content of dissolved oxygen (11.2 ppm) was slightly higher than that of standard. It seems that the cause of damaged pipe is grooving corrosion due to MnO inclusion formed on bond line and corrosion took place nearby welds.

• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.426-429
• /
• 1987

Four kinds of honey from acacia, bush clover, chestnut and polyflowers were anlayzed for 9 minerals including sodium/potassium ratio, and ash content. The ash content ranged from 0.11 to 0.24% with the mean of 0.16% as potassium was found in higher concentration than other minerals. Chestnut honey had a greater quantity of mineral than others and the lowest value of sodium/potassium ratio. The correlation coefficient of $r=0.582^{**}$ was obtained for potassium and sodium. Potassium and sodium had also a high positive correlation with calcium, magnesium, iron and manganese.

• Preventive Nutrition and Food Science
• /
• v.18 no.3
• /
• pp.214-217
• /
• 2013

Twenty-nine Korean wheat cultivars were analyzed for 8 important minerals (Cu, Fe, Mn, Zn, Ca, K, Mg and P) using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). A hierarchical cluster analysis (HCA) was applied to classify wheat cultivars, which has a similarity in mineral compositions. The concentration ranges of the micro-minerals Cu, Fe, Mn, and Zn: 0.12~0.71 mg/100 g, 2.89~5.89 mg/100 g, 1.65~4.48 mg/100 g, and 2.58~6.68 mg/100 g, respectively. The content ranges of the macro-minerals Ca, K, Mg and P: 31.3~46.3 mg/100 g, 288.2~383.3 mg/100 g, 113.6~168.6 mg/100 g, and 286.2~416.5 mg/100 g, respectively. The HCA grouped 6 clusters from all wheat samples and a significant variance was observed in the mineral composition of each group. Among the 6 clusters, the second group was high in Fe and Ca, whereas the fourth group had high Cu, Mn and K concentrations; the fifth cluster was high in Zn, Mg and P. The variation in mineral compositions in Korean wheat cultivars can be used in the wheat breeding program to develop a new wheat cultivar with high mineral content, thus to improve the nutritional profile of wheat grains.