• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.347-356
• /
• 1993

In joining alumina ceramics to metal by using Mo-Mn metallizing process the effects of metallizing thickness, temperature, and the composition of paste on the bond strength and the microstructure of joining interface were investigated. The bond strength variation in the range of metallizing temperature, 1350~155$0^{\circ}C$ was more than 150MPa above 145$0^{\circ}C$ and the optimum metallizing thickness was 30${\mu}{\textrm}{m}$. The optimum contents of Mn in Mo-Mn paste was 5% due to the bond strength decrease with the increase of addition. The effect of SiO2 addition in paste on bond strength was saturated around 200MPa. It was also observed that as the particle size of Mo decreased, the joinning with higher bond strength was shown in spite of low metallizing temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.407-410
• /
• 2000

(M $n_{l-x}$M $g_{l-x}$)F $e_{2+x}$ $O_4$(x=0.0, 0.025, 0.1, 0.2) for NTC(negative temperature coefficient) thermistor was prepared by calcining at 80$0^{\circ}C$ and sintering at from 1100 to 130$0^{\circ}C$ with 5$0^{\circ}C$ intervals while x was varied from 0.0 to 0.025, 0.1 and 0.2. The best linear property was obtained in the based specimen sintered at 120$0^{\circ}C$ with x=0.1 composition. Thermistor parameter, $B_{25~85^{\circ}C}$, was in the range of 5000~ 7300 [K]. Temperature coefficient of resistance, $\alpha$$_{25^{\circ}C}$, was -5.2 %/$^{\circ}C$. The results showed the possibility that Mn-Ni-Co based thermistor could be substituted by the composition used in this study was confirmed.med.d.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.267-271
• /
• 2001

These experiments were carried out to examine the effects of elemental substitution of Mn and La-Mn on Sr-ferrite. The calcined properties for the Mn and La-Mn substitution were examined, and the sintered magnetic properties were compared with the stoichiometric condition. The magnetic properties of calcined SrM and (La-Mn)$_{0.3}$-SrM composition were as follows, respectively; M$_{s}$ : 61.06 emu/g, $_{i}$H$_{c}$ : 4.45 kOe and M$_{s}$ : 61.06 emu/g, $_{i}$H$_{c}$ : 4.46 kOe. Also, the sintered ferrite magnets of Mn$_{0.3}$-SrM and [(La-Mn)$_{0.3}$-SrM exhibited a similar properties to the stoichiometric composition but the coercivity of (La-Mn)$_{x}$-SrM was decreased rapidly with x=0.5.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.466-472
• /
• 2000

As cathode materials of LiMn2O4-based lithium-ion secondary batteries, Li(Mn1-$\delta$M$\delta$)2O4 (M=Ni and Co, $\delta$=0, 0.05, 0.1 and 0.2) materials which Co and Ni are substituted for Mn, were syntehsized by the solid state reaction at 80$0^{\circ}C$ for 48 hours. No second phases were formed in Li(Mn1-$\delta$M$\delta$)2O4 system with substitution of Co. However, substitution of Ni caued to form a second phase of NiO when its composition exceeded over 0.2 of $\delta$ in Li(Mn1-$\delta$M$\delta$)2O4. As the results of charging-discharging test, the maximum capacity of Li(Mn1-$\delta$M$\delta$)2O4 appeared in $\delta$=0.1 for both Co and Ni. Also, Li(Mn1-$\delta$M$\delta$)2O4 electrode showed higher capacity and better cycle performance than LiMn2O4.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.503-508
• /
• 2005

A simple and effective method for the synthesis of LiMn$_{2}$O$_{4}$ powder as a cathode material for lithium secondary battery is reported. Micrometer size LiMn$_{2}$O$_{4}$ was prepared by combustion synthesis technique employing initial mixture of l.l LiNO$_{3}$ -1.3Mn-0.7MnO$_{2}$-1NaCl composition. Parametric study of the combustion process including molar ratio of Mn/MnO$_{2}$ and NaCl concentration were carried out under air atmosphere. The combustion products obtained were additionally heat treated at the temperature 900$^{\circ}C$ and the washed by distilled water. The results of charging-discharging characteristics revealed that LiMn$_{2}$O$_{4}$ cell synthesized in the presence of NaCl had a high capacity and much better reversibility than one formed without NaCl An approximate chemical mechanism for LiMn$_{2}$O$_{4}$ formation is proposed.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.571-576
• /
• 1988

The microstructure and electrical properties of 0.02Pb[Cd1/2W1/2)O3-0.505PbZrO3-0.475PbTiO3 with MnO2 addition have been investigated. The amount of MnO2 addition was 0, 0.2, 0.4, 0.6, 0.8, 1wt%, respectively. When MnO2 is added up to 0.2wt%, Mn3+ which is substituted for Ti4+ site make hole and act as a acceptor. When MnO2 is added over 0.2wt% Mn3+ which is substituted for Cd2+ site create electron and act as a donor. The variation of grain size show that it was rapidly increased by 0.4wt% addition of MnO2, and while that in the range of over 0.6wt% addition of MnO2 it was decreased. The solid solution range of MnO2 that assumed in this composition according to the variations of microstructure and electrical properties was 0.4-0.6wt%.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.168-168
• /
• 2003

• Journal of Magnetics
• /
• v.15 no.2
• /
• pp.56-60
• /
• 2010

In this study, we investigated the optical, magnetic, and electrical transport properties of $Si_{1-x}Mn_x$ (0.1 < x < 0.9) single crystals grown by the vertical Bridgman method. The alloys with a Mn concentration of up to 64% demonstrated weak ferromagnetic ordering around $T_C=30\;K$. The $Si_{0.25}Mn_{0.75}$ and $Si_{0.18}Mn_{0.82}$ alloys showed weak ferromagnetic ordering at 70 K and antiferromagnetic ordering at 104 K, as confirmed by magnetization, neutron diffraction, and transport studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.102-105
• /
• 2004

With varying rapid thermal annealing (RTA) temperature, luminescent properties of ZnMgS:Mn thin film sputter-deposited with one target were measured. Although all samples have the same composition, $Zn_{1-x}Mg_xS:Mn$ (x=0.25) can emit luminescence between 580 and 614 nm, which is controlled by only RTA temperature. It is understood that the energy band gap shift of ZnMgS:Mn thin film phosphor occurs with varying RTA temperature.

• Proceedings of the Petrological Society of Korea Conference
• /
• 1999.06a
• /
• pp.25-29
• /
• 1999

Manganese (Mn) oxides in soils and sediments differ in structure and composition. The influence of that diversity on the chromium (Cr) oxidation is the subject of this report. Oxidation of Cr(III) to Cr(VI) by coarse clay size Mn oxides (synthetic pyrolusite and natural lithiophorite, todorokite, and bimessite) was studied. Chromium oxidation by Mn oxides was initially fast and followed by a slow reaction. More Cr was oxidized by the Mn oxides at lower pH and higher initial Cr(III) concentration in solution. Birnessite had the highest chromium oxidation capacity per unit external surface area (COCUESA) and lithiophorite had the lowest COCUESA. The kinetics of Cr oxidation and COCUESA of Mn oixdes were apparently controlled by reactivity of surface Mn, mineralogy, and solution properties (pH and Cr(III) concentration).