• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1740-1742
• /
• 2004

산소 과전압이 낮은 $MnO_2$를 촉매로 사용하여 반도체 산화물계의 산소선택성 전극을 제조하고 산화물 코팅층의 미세구조와 전기화학적 특성을 분석하였다. Ti 기판에 열분해 법을 이용하여 $MnO_2$ 피막을 형성하였고, 또한 binder를 이용한 코팅 방법을 이용하여 Ti, Fb 기판에 $MnO_2$ 피막층을 형성하였다. 450$^{\circ}C$에서 1시간 열분해하여 약 1 ${\mu}m$의 $MnO_2$ 피막층을 형성 시켰으나 Ti 기판과의 접착력이 약하여 피막자체에 대한 전기화학적 특성은 관찰할 수 없었다. PVDF : $MnO_2$의 함량비가 1:1에서 1:6 까지는 DMF의 함량에 무관하게 전극 특성이 나타나지 않았지만 20:1 이상의 조성에서는 균일한 C-V 특성을 나타냈고, 산소 발생 과전압도 약 1.4V 정도로 감소되었다. 그러나 Ti 기판의 경우 열분해법을 이용하여 제조된 전극과 같이 낮은 기판과의 접착력 때문에 $MnO_2$ 피막층의 촉매효과가 현저하게 감소하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.52-53
• /
• 2004

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.90-90
• /
• 2011

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.817-821
• /
• 2001

A new $Mg_{2-x}MN_xSnO_4$ phosphor with an inverse spinel structure was synthesized by the solid-state reaction technique. The photoluminescence properties of the $Mg_2SnO_4$:Mn phosphors were investigated under 147nm -vacuum ultraviolet ray excitation. The Mn-doped $Mg_2SnO_4$ phosphor exhibited high emission intensity with the spectrum centered at 500nm wavelength. It was explained that the green emission in $Mg_2SnO_4$:Mn phosphor has originated from energy transfer from $^4T_1$ to $^6A_1$ of $Mn^{2+}$ ion at tetrahedral site of the spinel structure. The $Mn^{2+}$ ion concentration exhibiting the maximum emission intensity under the excitation of 147nm-vacuum ultraviolet ray was 0.25mol%. And the decay time of the phosphor was shorter than 10ms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.390-395
• /
• 2011

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, the composition of piezoelectric ceramics was 0.95Pb($Zr_xTi_{1-x}$)O3+yPb($Mn_{1/3}Nb_{2/3}$)$O_3$+(0.05-y)Pb($Sb_{1/2}Nb_{1/2}$)$O_3$. PMN compound was selected to improve mechanical quality factor and PSN to prevent the decrease of dielectric constant and electromechanical coupling coefficient. Dielectric and piezoelectric characteristics in the region of MPB of 0.95Pb($Zr_xTi_{1-x}$)$O_3$+yPb($Mn_{1/3}Nb_{2/3}$)$O_3$+(0.05-y)Pb($Sb_{1/2}Nb_{1/2}$)$O_3$ ceramics was discussed both quantatively and qualitatively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.245-250
• /
• 1999

The effect of cation substitution on the inonic conductivity was studied in $(Li_{0.5}La_{0.5})_{1-y}Sr_yTi_{1-x}Mn_xO_3$ system. In case of Sr substitution, the ionic conductivity abrubtly decreased over y=0.05. This may be caused by the decrease of lithium contents which contribute to lithium inonic conductivity. Jahn-Teller distortion as well as lattice parameter variation influenced the inonic conductivity in case of Mn substitution. A and B-site cations effects on the conductivities were found to be independent, and the ionic conductivity as high as $2.8{\times}10^{-2}$S/cm was obtained in x=0.0006 and y=0.05.

• Journal of the Korean Ceramic Society
• /
• v.34 no.3
• /
• pp.257-264
• /
• 1997

The aim of this study was to investigate the degradation of piezoelectric properties with compressive cy-clic loading, the change in bending strength before and after poling treatment and fracture strength in MPB depending on the amount of MnO2 addition. The MPB with 0.25 wt.% MnO2 showed the best resistance against the piezoelectric degradation with compressive cyclic loading. Bending strength increased when pol-ing and loading directions are parallel, however decreased when poling and loading directions are per-pendicular each other. Because, during poling treatment, compressive residual stress is generated in the pol-ing direction but tensile residual stress in the perpendicular direction to poling direction.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.133-137
• /
• 2009

$MnGeP_2$ thin films grown on GaAs exhibit room-temperature ferromagnetism with $T_C{\sim}$320 K, based on both magnetization and resistance measurements. The coercive fields at 5, 250, and 300 K are 3870, 1380 and 155 Oe, respectively. The anomalous Hall effect was observed, indicating spin polarization of the carriers. Hysteresis has been observed in both magnetoresistance and Hall measurements. The current-voltage characteristics of a $MnGeP_2$ film grown on an n-type GaAs substrate display semiconducting behavior.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.148.1-148.1
• /
• 2013

투어멀린는 $XY_3Z_6(Si_6O_{18})(BO_3)_3$ 화학 방정식을 가진 광물로써 조성에 따라 alkali 투어멀린, calcic 투어멀린, X-site vacant 투어멀린 등으로 불린다. 투어멀린 특성과 화학성분에 따라 종을 구분하는데, 주된 종들은 엘바이트, 리디코타이트, 드라바이트, 우바이트, 숄이 있다. 일반적으로 적색 투어멀린의 발색 원인은 Mn, Fe 그리고 Cu의 함량에 따라 색상의 차이를 나타낸다. 본 연구에서 우리는 10MeV 에너지와 $1{\times}10^{17}cm^2$ 조건에서 전자빔을 수행 한 후 투어멀린의 컬러 변화를 관찰하였다. 자외선-가시광선 분광분석결과 모든 시료는 전자빔 조사 후 530 nm의 $Mn^{3+}$부근의 흡수 peak들이 증가하는 것이 관찰되었다. 이는 $Mn^{2+}$에서 $Mn^{3+}$ 이동 때문이여, $Mn^{3+}$는 Y-site에서 O(1)H-O(3)H 축에 따라 Jann-taller 변형으로 안정된 구조를 가지게 된다. 따라서 전자빔 조사 후 적색으로 변하게 되는 것이다. 또한 전자빔 조사 후 컬러가 모두 변했지만 상온에 뒀을 때 변화 된 컬러가 원래의 색으로 되돌아가는 향상을 보였다. 이는 전자빔 조사 후 전자가 튕겨져 나가서 불안정한 상태로 존재하고 있다가 상온의 열에 의한 에너지에 통해 다시 안정된 상태로 되돌아오는 결과로 볼 수 있다. 또한 우리는 WD-XRF를 통해 미량의 Mn 원소함량 차이에 따라 전자빔 조사 시 컬러 변화에 미치는 영향에 대해 확인할 수 있었다. 그리고 적외선 분광분석에서는 4,300-4,600 $cm^{-1}$사이에 특징적인 밴드들이 관찰되었다.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.271-276
• /
• 2018

In the industry, Zn galvanizing on the steel using the principle of sacrificial anode is used. The steel have some problem, specially corrosion problem. To solve corrosion problem, Zn-Mn alloy plating has been studied as one of the measures to increase the corrosion resistance rather than pure zinc plating. It is possible to be applied to automotive parts requiring high corrosion resistance even though the plating cost is high. In this study, Zn-Mn alloys were electrodeposited from an acidic chloride bath. The influence of the electrolytic conditions on the composition of the alloy plating in the chloride bath was investigated. As the current density of the cathode increases, Zn content of electrodeposit decrease and Mn content of electrodeposit increase. As the temperature of the electrolyte increases, Zn content of electrodeposit decrease and Mn content of electrodeposit increase. The results are explained by the cathode overvoltage curve of Mn and Zn.