• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.11-17
• /
• 2003

Ni-Mn 산화물 NTC 서미스터의 미세구조와 전기적 특성에 미치는 Zr $O_2$ 첨가의 효과를 연구하였다. Zr $O_2$를 포함하는 Ni-Mn-Zr 산화물 소결체의 주요 상은 입방정 스피넬 구조를 가지는 NiO-Mn$_3$ $O_4$-Zr $O_2$의 고용체와 정방정 결정구조를 가지는 Zr $O_2$ 상이였다. Zr $O_2$의 첨가량이 증가함에 따라 Ni-Mn-Zr산화물의 고용체를 형성하지 못하고 생성된 Zr $O_2$의 양이 증가하였다. NiO-Mn$_3$ $O_4$-Zr $O_2$ NTC 서미스터에 있어서 절대온도 역수(l/T)에 대한 로그 비저항(log $ho$)은 직선적인 관계가 있었고, 비저항, B$_{140}$320/정수 및 활성화 에너지는 Zr $O_2$ 함량이 증가함에 따라 크게 증가하였다.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.583-590
• /
• 1997

The effects of Mn2O3 and Y2O3 additives on the microstructure and dielectric properties of Sr(Zr, Ti)O3 have been investigated. Powders with Sr(Zr1-xTix)O3(0$\leq$x$\leq$0.1) composition were prepared by the conventional solid state processing from commercial TiO2 and precipitation-processed ZrO2. The powders containing sintering additives of Mn2O3 and Y2O3 were compacted and then sintered at 1,55$0^{\circ}C$ for 4 h to get>97% relative density. Mn2O3 suppressed the grain growth and Y2O3 enhanced the density of sintered body. The oxidation state of Mn ions were determined by a chemical wet method and EPR spectroscopy. Mn ions were present as Mn2+ and Mn4+ in SrZrO3, while as Mn3+ and Mn4+ in Ti-substituted Sr(Zr, Ti)O3. With the substitution of Ti, the lattice parameters of SrZrO3 decreased and its dielectric constant increased with remarkable decrease in Q value. The dielectric constant of Sr(Zr, Ti)O3 was in the range of 30 to 40, Q values 1,200~5,400 at 6 GHz and temperature coefficient of resonant frequency -67~100 ppm/K.

• 한국세라믹학회지
• /
• 제27권2호
• /
• pp.187-194
• /
• 1990

Effects of MnO2 addition ranged from 0.0wt% to 5.0wt% on the microstructure and dielectric and piezoelectric properties of the Pb(Zr0.52 Ti0.48)O3 Ceramics have been investigated. The solubility limit of MnO2 in Pb(Zr0.52 Ti0.48)O3 is about 0.5wt%, and MnO2 as a valence state of Mn3+ is substituted for (Zr, Ti) lattice site in PZT solid-solution. The addition of MnO2 up to 0.5wt% in Pb(Zr0.52 Ti0.48)O3 brings increase of density, but decreased of grain size and tetragonality. Dielectric constant slightly decreases, but both coupling factor(Kp) and mechanical quality factor(Qm) increase with the addition of MnO2. However, excess amount of MnO2 addition more than 0.75wt% results in rapid decrease of resistance. Dielectric constant and tan $\delta$ increase due to the second phase and inhomogeneous Mn distribution.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.443-450
• /
• 2014

지르코니아를 고정한 실리카($ZrO_2-SiO_2$)와 망가니즈 산화물($MnO_x$)에 백금을 담지하여 제조한 촉매에서 수소에 의한 일산화질소의 선택적 촉매 환원($H_2$-SCR) 반응을 조사하였다. $Pt-MnO_x$ 촉매에서는 NO 전환율이 낮으며, $N_2O$와 $NO_2$ 생성이 억제되었다. 반면, $Pt/ZrO_2-SiO_2$ 촉매에서는 NO 전환율이 높지만, $100{\sim}150^{\circ}C$에서는 $N_2O$가, $200{\sim}300^{\circ}C$에서는 온도가 높아지면 $NO_2$ 수율이 높아져, $N_2$ 수율이 낮았다. $ZrO_2-SiO_2$에 $MnO_x$와 백금을 같이 담지한 $Pt-MnO_x/ZrO_2-SiO_2$촉매에서는 $100{\sim}150^{\circ}C$에서 이들 성분의 상승작용으로 $N_2$ 수율이 조금 높아졌다. 이들 촉매에서 표면 조성, 산화 상태, 산성도를 조사하고, NO가 흡착되어 수소와 반응하는 과정의 IR 스펙트럼을 그렸다. NO의 $H_2$-SCR 반응에서 전환율과 생성물 수율을 촉매 구성 성분의 촉매작용과 연계지어 고찰하였다.

• 한국재료학회지
• /
• 제5권1호
• /
• pp.36-41
• /
• 1995

$(Pb_{0.62}Ca_{0.38})ZrO_{3}$계에서의 조성 x=0.38의 $(Pb_{0.62}Ca_{0.38})ZrO_{3}$에 Mn 성분을 첨가하여 $1300^{\circ}C$에서 2시간 소결한 세라믹스의 소결성 및 고주파 유전특성을 연구하였다. Mn의 첨가로 소결온도가 낮아지며 치밀한 소결체를 얻을 수 있었다. 하소온도가 높아짐에 따라 하소과정에서 합성반응이 충분히 이루어져 소결체의 최종 소결과정에 영향을 미처 유전체의 유전상수와 품질계수 Q값이 증가하였다. Mn의 첨가량에 따른 물성변화는 Mn의 첨가량이 0.15wt%까지의 첨가범위에서는 $Mn^{4+}$가 $Mn^{3+}$ 또는 $Mn^{2+}$로 환원됨에 따라 산소공공이 생성되며, 억셉터로 작용하여 품질계수 Q값이 1300정도까지 증가하였고, 유전율은 90-100 정도로 변화가 없었다. 그러나 Mn 첨가량이 0.5 wt%이상일때 유전손실이 매우 증가되며 동시에 품질계수 Q값이 점차 감소하였다.

• 공업화학
• /
• 제23권3호
• /
• pp.348-351
• /
• 2012

본 연구에서는 NO의 저온 SCR 반응에서 구리 첨가가 $Mn/CeO_2-ZrO_2$ 촉매의 활성에 미치는 영향을 알아보았다. 이를 위하여 $Mn/CeO_2-ZrO_2$ 촉매에 구리가 각각 5, 10, 15 wt% 첨가된 세가지 촉매의 활성을 조사하였다. 촉매의 특성은 BET, XRD, XPS, $H_2-TPR$을 통해 분석하였다. 구리가 첨가된 촉매의 질소산화물 저감 효율을 측정한 결과 Cu 농도가 증가할수록 활성이 증가하였으며 Cu 15 wt%가 담지하였을 경우 질소산화물 저감효율이 99%까지 도달하는 등 가장 높은 저감효율을 나타내었다. 이는 표면의 망간과 구리의 interaction에 의한 환원의 향상이 촉매 효율 증가의 원인으로 여겨진다.

• 한국세라믹학회지
• /
• 제22권1호
• /
• pp.11-18
• /
• 1985

The effect of stress induced phase transformation on $Al_2 O_3$ matrix dispersed with $ZrO_2-Y_2O_3$ has been studied. In order to determinate the mechanical properties three $Al_2O_3-ZrO_2$ composite series containing 1, 3 and 5 mole% $Y_2O_3$ were prepared. The starting materials were $Al_2O_3$ and $ZrO_2-Y_2O_3$ which was prepared from the aqueous solution of high purity $YCl_3$.$6H_2O$ and $ZrOCl_2$.$8H_2O$. Powder mixtures of $Al_2O_3-ZrO_2$ containing $Y_2O_3$ have been prepared by ball-milling with methanol and the samples were formed by isostatic press and sintered at 150$0^{\circ}C$ for 2hrs. After sintering. the specimens were polished for mechanical determination. The relative density of sintered specimens were also measured. It was found that the addition of 1, 3mole% to {{{{ { ZrO}_{2 } }} allowed full retention of the tetragonal phase in $Al_2O_3-ZrO_2$ but partially stabilized zirconia (PSZ) was produced by additions of 5 mole% $Y_2O_3$.The critical stress-intensity factor KIc of $A_2O_3-ZrO_2$ (containing 1 mole% $Y_2O_3$) composite materials increased with increasing $ZrO_2$ content, The maximum value of KIC=7Mn/$m^3$/2 at 20 mole% $ZrO_2$ exhibited about twice that of the $Al_2 O_3$ The modulus of rupture exhibited a trend similiar to KIC The maximum value of MOR was 580MN/m2. As the amount of Y2O3 increase it was observed that the maximum of KIC and MOR decreased : Additions of 3 mole% $Al_2O_3$ $Y_2O_3$ allowed the maximum of KIC 6MN/$m^3$/2 MOR 540MN/$m^2$ at 15 mole% $ZrO_2$ additions of 5 mole% $Y_2O_3$ allowed the maximum of KIC 5MN/$m^3$/2 MOR 410MN/$m^2$ at 10 mole% $ZrO_2$.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.612-616
• /
• 2000

The effect of Co dopant on the (La, Sr)MnO3 cathode was investigated. La2Zr2O7 and SrZrO3 were formed as the reaction products between YSZ and LSMC. The reactivity of LSMC with YSZ increased with increasing Co content. However, the cathodic polarization resistance decreased with increasing Co doping. Therefore, doping Co at Mn site in the (La, Sr)MnO3 cathode was effective on controlling the polarization resistance of the cathode. The polarization property of LSMC-YSZ composite(60 wt%: 40 wt%) cathode was better than that of LSMC single cathode.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.297-304
• /
• 1991

Dielectric hysteresis characteristics of Pb(Zr0.52Ti0.48)O3 ceramics have been investigated as a function of the amount of MnO2 addition ranged from 0.0 wt% in Pb(Zr0.52Ti0.48)O3 ceramics enhanced the dielectric strength, aging effect and remanent polarization, while reduced the coercive field. These results could be explained by the effect of Mn-Vo association due to the substitution of Mn for the (Zr, Ti) site in PZT.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.488-494
• /
• 1988

Effects of MnO2 addition on themicrostructure, dielectric and piezoelectric properties of Rhombohedral, Tetragonal and Morphotropic phase boundary(MPB) in Pb(Ni1/3Nb2/3)O3-PbTiO3-PbZrO3 system were investigated and respectively the amount of MnO2 addition was 0, 0.2, 0.5, 1.0, 3.0wt%. In the tetragonal region, compared with the Rhombohedral and Morpotropic phase boundary, Mechanical quality factor(Qm), Curie temperature(Tc) and Dissipation factor were promoted by addition of MnO2. According to the results of the microstructure, dielectric and piezoelectric properties, the solid solution range of MnO2 addition in this system was 0.2-0.5wt%.