• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.684-688
• /
• 2001

The structural, piezoelectric and dynamic range characteristics of modified PbTi $O_3$ceramics were investigated as a function of Mn $O_2$addition. With the increase of Mn $O_2$addition, Curie temperature was decreased. As the increase of Mn $O_2$addition, mechanical quality factor ( $Q_{mt3}$) in the third over tone thickness mode was increased. Dynamic range in the third over tone thickness mode was also increased with the increase of Mn $O_2$addition. The composition ceramics added to 0.075wt% Mn $O_2$showed the best properties for SMD type resonator using third over tone thickness vibration in terms of high Curie temperature more than 31$0^{\circ}C$ and dynamic range of 49.38dB.B.

• Journal of the Korean Ceramic Society
• /
• v.32 no.5
• /
• pp.567-574
• /
• 1995

The effect of MnO2 addition to 0.1mol% Sb2O3-doped BaTiO3 ceramics on microstructure and PTCR characteristics was studied. The PTCR characteristics was observed when 0.01 and 0.02 wt% MnO2 were added and sintered at 132$0^{\circ}C$ for 1 hour. The characteristics can be explained by the changes in the number and size of the abnormal grain growth due to the liquid phase during sintering. when the amount of MnO2 addition was 0.03 wt%, the sample showed NTCR characteristics with room-temperature resistivity over 109 Ωm regardless of the sintering temperature. This behavior can be described by the microstructure change due to the abnormal grain growth and charge compensation effect by MnO2 added. The room-temperature resistivity was increased as the amount of MnO2 was increased. And the specific resistivity ratio (pmax/pmin) showed maximum at 0.02wt% MnO2.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.488-494
• /
• 1988

Effects of MnO2 addition on themicrostructure, dielectric and piezoelectric properties of Rhombohedral, Tetragonal and Morphotropic phase boundary(MPB) in Pb(Ni1/3Nb2/3)O3-PbTiO3-PbZrO3 system were investigated and respectively the amount of MnO2 addition was 0, 0.2, 0.5, 1.0, 3.0wt%. In the tetragonal region, compared with the Rhombohedral and Morpotropic phase boundary, Mechanical quality factor(Qm), Curie temperature(Tc) and Dissipation factor were promoted by addition of MnO2. According to the results of the microstructure, dielectric and piezoelectric properties, the solid solution range of MnO2 addition in this system was 0.2-0.5wt%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1056-1060
• /
• 2004

In this study, 0.96B $i_{0.5}$($Na_{0.84}$ $K_{0.16}$)$_{0.5}$Ti $O_3$ + 0.04SrTi $O_3$ + 0.3 wt% N $b_2$ $O_{5}$+0.2 wt% L $a_2$ $O_3$ + xwt % Mn $O_2$ were investigated as a function of the amount of Mn $O_2$ addition in order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics. With increasing the amount of Mn $O_2$ addition, the density, electromechanical coupling factor( $k_{p}$), piezoelectric constant( $d_{33}$, $g_{33}$) and curie temperature (Tc) showed the maximum value of 5.7 g/㎤, 38 %, 219 pC/N, 26 mVㆍm/N and 32$0^{\circ}C$ at 0.1 wt% Mn $O_2$ addition, respectively, and mechanical quality factor( $Q_{m}$ ) showed the maximum value of 158 at 0.3 wt% Mn $O_2$ addition.ddition.ion.n.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.4
• /
• pp.193-198
• /
• 2002

Alloys of XD45 (Ti45A12Nb2Mn-0.8vol%TiB$_2$) and XD47 (Ti47A12Nb2Mn-0.8vol%TiB$_2$) were oxidized between 800 and $1000^{\circ}C$ in air, and their oxidation characteristics were studied. The oxide scales consisted primarily of an outer $TiO_2$ layer, an intermediate $Al_2$$O_3$-rich layer, and an inner mixed layer of ($TiO_2$+$Al_2$$O_3$). Nb tended to present at the lower part of the oxide scale, whereas Mn at the upper part of the oxide scale. The Pt marker tests indicated that the outer oxide layer grew primarily by the outward diffusion of Ti and Mn, and the inner mixed layer by the inward transport of oxygen.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.865-868
• /
• 2000

It was examined that the relationship between microstructures, electrical properties and crystal structure of (1-x)CaMnO$_3$-xCaTiO$_3$solid solution system which was made by mixing a semiconducting material CaMnO$_3$of low resistance and a dielectric material CaTiO$_3$of high resistance with variable ratios (x=0, 0.1, 0.3, 0.5, 0.7, 0.9, 1.0). As the CaTiO$_3$increased, the resistance, B constant and lattice constant were increased, but the grain size was decreased. On particular, above 50wt% of CaTiO$_3$, the resistance at 2 5$^{\circ}C$ was rapidly increased due to the correlation in connectivity of the lattices between the conductive Mn$^{+4}$ octahedron and the insulative Ti$^{+4}$ octahedron.ron.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1260-1266
• /
• 1996

The effects of SiO2 MnO2 and sintering atmospheres (O2, N2) on the piezoelectric properties and densification behaviors of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 were investigated. The addition of SiO2 to the system enhanced the rate of densification but supressed the rate of grain growth. On the other hand the addition of MnO2 to the system did not nearly affect the rate of densification but increased slightly the rate of grain growth The densification of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 was promoted with increasing the partial pressure of O2. The relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 sintered under O2 atmosphere were higher than under N2 atmosphere. Whereas the mechanical quality factor (Qm) of specimens sintered under O2 atmosphere were lower than under N2 atmosphere. Thus the sintering atmosphere of O2 and N2 in Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 acted as donor and acceptor respectively. As the amount of SiO2 increased the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 but the mechanical quality factor (Qm) did not nearly change, In the case of the addition of MnO2 to the system the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 sintered under O2 atmosphere decreased rapidly with increasing the amount of MnO2 but they were unchanged with increasing the amount of MnO2 under N2 sintering atmosphere. Therefore the differences of the relative dielect-ric constant ($\varepsilon$r) and piezoelectric constant (d33) due to sintering atmosphere were diminished as the amount of MnO2 increased.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.288-294
• /
• 2006

Alloys of TiAl-Mn-(0, 5, 10)wt.% $Y_2O_3$ were prepared by a powder metallurgical route, and their oxidation behavior was studied at 800, 900 and $1000^{\circ}C$ in 1 atm of air. The scale formed on the alloys consisted of $TiO_2$ and $Al_2O_3$ oxides. During oxidation, Mn tended to diffuse outward, whereas oxygen diffused inward. The dispersoids of $T_2O_3$, which segregated at the matrix grain boundaries, acted as a diffusion channel for cations and oxygen ions, nucleation sites for oxides, and vacancy annihilation sites. $T_2O_3$ increased the scale thickness, but improved the scale adherence.

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.152-161
• /
• 1988

Pb(Zr, Ti)O$^{3}$-Pb(Mg, Nb)O$^{3}$계에 MnO$_{2}$첨가량을 변화시켜 소결성, 미세구조, 유전상수, 비저항 및 압전특성에 미치는 영향을 XRD, EDAX 및 SEM을 이용하여 미세구조를 관찰하고 실험을 통하여 전기적 성질에 미치는 영향을 밝혔다. 비저항의 변화없이 그레인 성장이 억제되는 $MnO_{2}$의 첨가량은 0.4wt%이었으며 이때 분말의 합성이 촉진되어 소성된 시편의 밀도가 증가하였다. 그러나 고상반응의 범위를 벗어나는 과잉 $MnO_{2}$는 편석이 되어 그레인 경계상에 모임이 확인되었고 또한 기공을 형성하여 밀도를 낮추었다. $Mn^{+4}$는 $Mg^{+2}$ 와 치환되어 페로브스카이트 구조의 "A" 결핍을 유발하였으며 이것이 비저강을 감소시키는 원인으로 밝혀졌다.감소시키는 원인으로 밝혀졌다.