• Journal of Mushroom
• /
• v.5 no.1
• /
• pp.13-20
• /
• 2007

Analysis of genetic characteristics of Flammulina velutipes showed that strains have a range of 85% in genetic distribution diagram. According to this result, we divided these strains into five groups. In experiment of determinating the optimum media and condition in cultivating F. velutipes, we found the optimum temperature and pH range for hypha growth were $25^{\circ}C$ and 6.0 to 7.0, respectively. in addition, the best media for growth of that in plate was MCM (Mushroom Complete Media) which have a growth length from 68 to 83 mm. In vivo test, we observed that fast growth and good density of hyphae in mixture media of douglas fir sawdust, cotton seed meal and beet pulp (6:2:2 V/V). Also when we cultivated F. velutipes in this media, we harvested high yield of fruiting body.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.1
• /
• pp.53-66
• /
• 2012

A comparison of analytical approaches for Levoglucosan ($C_6H_{10}O_5$, commonly formed from the pyrolysis of carbohydrates such as cellulose) and used for a molecular marker in biomass burning is made between the four different analytical systems. 1) Spectrothermography technique as the evaluation of thermograms of carbon using Elemental Carbon & Organic Carbon Analyzer, 2) mass spectrometry technique using Gas Chromatography/mass spectrometer (GC/MS), 3) Aerosol Mass Spectrometer (AMS) for the identification of the particle size distribution and chemical composition, and 4) two dimensional Gas Chromatography with Time of Flight mass spectrometry (GC${\times}$GC-TOFMS) for defining the signature of Levoglucosan in terms of chemical analytical process. First, a Spectrothermography, which is defined as the graphical representation of the carbon, can be measured as a function of temperature during the thermal separation process and spectrothermographic analysis. GC/MS can detect mass fragment ions of Levoglucosan characterized by its base peak at m/z 60, 73 in mass fragment-grams by methylation and m/z 217, 204 by trimethylsilylderivatives (TMS-derivatives). AMS can be used to analyze the base peak at m/z 60.021, 73.029 in mass fragment-grams with a multiple-peak Gaussian curve fit algorithm. In the analysis of TMS derivatives by GC${\times}$GC-TOFMS, it can detect m/z 73 as the base ion for the identification of Levoglucosan. It can also observe m/z 217 and 204 with existence of m/z 333. Although the ratios of m/z 217 and m/z 204 to the base ion (m/z 73) in the mass spectrum of GC${\times}$GC-TOFMS lower than those of GC/MS, Levoglucosan can be separated and characterized from D (-) +Ribose in the mixture of sugar compounds. At last, the environmental significance of Levoglucosan will be discussed with respect to the health effect to offer important opportunities for clinical and potential epidemiological research for reducing incidence of cardiovascular and respiratory diseases.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1287-1292
• /
• 2006

Constructed wetlands are well known as highly efficient system to treat wastewater from different sources. Among the constructed wetlands, upflow types of constructed wetlands have become a common selection of wastewater during the last decade. We conducted a pilot scale study at peen house on treating potential of nutrients by upflow vegetated filter(UVF) pilot wetland which was combined with hydrodynamic separator and used the cattail plant(Typha angustifolia), and operated with artificial nutrients influent. This study evaluate the performances of upflow vegetated fille, in removal of nutrients. The objectives of this study were two-fold: (i) to evaluate the nutrients removal performance of pilot-scale upflow vegetated filter, filled with a mixture of perlite and soil media and planted with cattails and (ii) to design of scale-up upflow vegetated filter using Froude number. Results indicated that, under the condition of the ranges of hydraulic surface load rate were $22.7{\pm}9.6\;m^3/m^2/day$, the average removal of $COD_{Mn}$, and TN, TP were 57.5%, 40.0% and 41.5%, respectively. Computational fluid dynamics, FLUENT 6.0 program was used to predict the distribution of velocity in UVF and hydrodynamic separator. Full scale UVF was designed using the Froude number scale-up method that was assumed geomertic similarity between model and prototype. Result shows that the UVF with 3 m diameter has capacity of design sewage flowrate 75 $m^3/day$.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.768-782
• /
• 2010

Because of the different shooting position between multi-view cameras and the imperfect camera calibration, Illumination mismatches of multi-view video can happen. This variation can bring about the performance decrease of multi-view video coding(MVC) algorithm. A histogram matching algorithm can be applied to recompensate these inconsistencies in a prefiltering step. Once all camera frames of a multi-view sequence are adjusted to a predefined reference through the histogram matching, the coding efficiency of MVC is improved. However the histogram distribution can be different not only between neighboring views but also between sequential views on account of movements of camera angle and some objects, especially human. Therefore the histogram matching algorithm which references all frames in chose view is not appropriate for compensating the illumination differences of these sequence. Thus we propose new algorithms both the image classification algorithm which is applied two criteria to improve the correlation between inter-view frames and the histogram matching which references and matches with a group of pictures(GOP) as a unit to advance the correlation between successive frames. Experimental results show that the compression ratio for the proposed algorithm is improved comparing with the conventional algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5585-5593
• /
• 2014

This study tested the hypothesis that the significance of the heterogeneous dispersion parameter in safety performance function (SPF) used to estimate the expected crashes is affected by the endogenous heterogeneous prior distributions, and analyzed the impacts of the mis-specified dispersion parameter on the evaluation results for traffic safety countermeasures. In particular, this study simulated the Poisson means based on the heterogeneous dispersion parameters and estimated the SPFs using both the negative binomial (NB) model and the heterogeneous negative binomial (HNB) model for analyzing the impacts of the model mis-specification on the mean and dispersion functions in SPF. In addition, this study analyzed the characteristics of errors in the crash reduction factors (CRFs) obtained when the two models are used to estimate the posterior means and variances, which are essentially estimated through the estimated hyper-parameters in the heterogeneous prior distributions. The simulation study results showed that a mis-estimation on the heterogeneous dispersion parameters through the NB model does not affect the coefficient of the mean functions, but the variances of the prior distribution are seriously mis-estimated when the NB model is used to develop SPFs without considering the heterogeneity in dispersion. Consequently, when the NB model is used erroneously to estimate the prior distributions with heterogeneous dispersion parameters, the mis-estimated posterior mean can produce large errors in CRFs up to 120%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.673-680
• /
• 2017

sump pump is a system that draws in water that is stored in a dam or reservoir. They are used to pump large amounts of water for cooling systems in large power plants, such as thermal and nuclear plants. However, if the flow and sump pump ratio are small, the flow rate increases around the inlet port. This causes a turbulent vortex or swirl flows. The turbulent flow reduces the performance and can cause failure. Various methods have been devised to solve the problem, but a correct solution has not been found for low water level. The most efficient solution is to install an anti-vortex device (AVD) or increase the length of the sump inlet, which makes the flow uniform. This paper presents a computational fluid dynamics (CFD) analysis of the flow characteristics in a sump pump for different sump inlet lengths and AVD types. Modeling was performed in three stages based on the pump intake, sump, and pump. For accurate analysis, the grid was made denser in the intake part, and the grid for the sump pump and AVD were also dense. 1.2-1.5 million grid elements were generated using ANSYS ICEM-CFD 14.5 with a mixture of tetra and prism elements. The analysis was done using the SST turbulence model of ANSYS CFX14.5, a commercial CFD program. The conditions were as follows: H.W.L 6.0 m, L.W.L 3.5, Qmax 4.000 kg/s, Qavg 3.500 kg/s Qmin 2.500 kg/s. The results of analysis by the vertex angle and velocity distribution are as follows. A sump pump with an Ext E-type AVD was accepted at a high water level. However, further studies are needed for a low water level using the Ext E-type AVD as a base.

• Journal of Korean Medical classics
• /
• v.24 no.2
• /
• pp.23-50
• /
• 2011

"LeiGongPaoZhiLun" is the first pharmaceutical book, and there are various opinion on when LeiXiao(雷斅), the author lived. From the aspect of several data, it is appropriate most that LeiXiao live in the period of Sui(隋) Dynasty, like SuSong(蘇頌) in the Sung Dynasty said, This book was not made at one time by one person. At the beginning, it was written by LeiXiao and the later generations enlarged to finish. The original of "LeiGongPaoZhiLun" disappeared already but a large amount of this book was quoted to "ZhengLeiBenCao(證類本草)" to be preserved. The contents of "LeiGongPaoZhiLun" are the first professional book about processing of medicinal, in which most of processing of medicinal that is generally used today, is included and some methods are unused. Besides, the regulations of this book are specific, the range is broad, and theoretical frame is established for the first time. This book has abundant contents, in which several processing of medicinal are written. There are 10 methods such as steaming(蒸法), boiling(煮法), baking(炮法), stir-frying(炒法), calcining(煅法), long time boiling(煉法), scorching(燒法), baking after wrapping(煨法), immersing(浸法), washing(洗法), flying(飛法), etc. How to remove some section that is not used for drug, how to separate according to medical use and region to be applied, how to smash, how to cut, how to dry, container for medicine, warning for making a prescription, time to make medicine and amount of medicine, how to distinguish superior and inferior and origin, how to make medicine partially, etc, are contained in this book. The contents of "LeiGongPaoZhiLun" can be mixture of processing of medicinal of medical scientists and taoists. In conclusion, however, the effect by the later medical generations of "LeiGongPaoZhiLun" was not great on processing of medicinal. It stemmed from the difference of processing of medicinal in this very taoistic book that realistic difficulties were disregarded by taoists for training and practical purpose, treatment that is the reason that later medical generations used processing of medicinal. Consequently, there is no great relation between the development of processing of medicinal in the Sung Dynasty and this book. "LeiGongYaoXingFu(雷公藥性賦)" that was abundant in medical market in Ming(明) and Qing(清) period has no relation with "LeiGongPaoZhiLun" is kind of a distribution-purposed book that was mnge in or after Ming Dynasty. However, since a book that is said to be written by 'LiGao(李杲)'PaoZhihis nof a dijust borrowed and focus on a brief summery, it is not desirable for beginners to learn medical knowledge. "LeiGongPaoZhiLun" is the first pharmaceutical book and is a model to show how a science in the history of the herb medicine generated and developed and how such a book is changed and modified to make a change of value.

• Journal of the Korean Geographical Society
• /
• v.45 no.3
• /
• pp.390-413
• /
• 2010

Facing reconfiguration of world economic order in the process of globalization and changes in domestic economic and social conditions, Japan has experienced a rapid inflow of foreign immigrants and hence a restructuring of labor market and ethic and cultural mixture. This paper explores contexts of inflow and social and spatial characteristics of immigrant workers in Japan. Uneven regional development on the global level and shifting to flexible accumulation regime, depletion of previously underutilized labor resource, better-educated youth and shrinking and aging of Japanese populace on the national level can be pointed out as important elements of immigration contexts. This paper also explains the hierarchizaton of labor market and differentiation of spatial distribution of immigrant workers in Japan in terms of visa condition and nationality. In particular, focusing on the case of Hiroshima prefecture, this paper analyzes residential differentiation of immigrants according to their nationality. Finally, it finds out some problems which immigrant workers have confronted in Hiroshima region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.87-94
• /
• 2017

Because the cavitation flow driven by an underwater propeller corrodes the materials around it and generates a high level of noise, it has become an important topic in engineering research. In this study, computational fluid dynamics techniques are applied to simulate cavitation flow, and the noise in the flow is predicted by applying the acoustic analogy to the predicted flow. The predicted results are compared with measurement results and other predictions in terms of surface pressure distribution and the temporal variation in liquid volume fraction. The predicted results are found to be in good agreement with the measured results. The source of the noise attributed to the time rate of change in the liquid volume fraction around the hydrofoil is modeled as a monopole source, and the source of the noise due to unsteady pressure perturbations on the hydrofoil surface is modeled as a dipole source. Then the predicted noise results are analyzed in terms of directivity and SPL spectrum. The noise caused by unsteady pressure perturbations was dominant in the entire frequency range considered in the study.

• Journal of agricultural medicine and community health
• /
• v.40 no.4
• /
• pp.240-249
• /
• 2015

Objectives: Farmers are known to be exposed to a variety of allergens related to the work environment. This study was conducted to determine the sensitization rates as well as South Korea that they are sensitized to certain allergens farmers through the skin prick test. Methods: By targeting a total of 1143 people living in the rural town of Gyeonggi Province, it was conducted a questionnaire containing demographic and occupational risk factors and underwent skin prick tests with 15 types of allergens(including positive and negative controls). Multivariable logistic regression analysis was used to analyze the association between occupational risk factors and skin prick test positivity. Results: Except for the 30 people whose result is invalid, positive rate of the skin prick test was 18.6% in 1,113 people. The species of house dust mite, Dermatophagoides pteronyssinus and Dermatophagoides farinae was the highest at 8.7% and 8.6%. After adjusted by age, gender, smoking and education level, odds ratio of flower plant farmers is 4.467(95% CI: 2.094-9.527) and fruit farmer is 2.275(95% CI: 1.096-4.721). In addition, the rate of sensitization to grass pollen mixture of the flower plant farmers is significantly higher(15.9%, p<0.001) than other allergens. Conclusions: Even farmers, the rate of sensitization to allergens related to the general environment, such as house dust mite is relatively dominant. However, given the presence of potential cross-reactivity between the allergens or distribution showed that the unique aspects of allergen sensitization in the flower growers, occupational cause is not be completely ruled out.