• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.585-595
• /
• 2001

A series of experiments have been carried out to investigate the effects of non-condensable gas on the direct contact film condensation of vapor mixture under an adiabatic wall condition. The average heat transfer coefficient of the direct contact condensation was obtained at the atmospheric pressure with four main parameters ; air-mass fraction, mixture velocity, film Reynolds number, and the degree of water film subcooling having an influence on the condensation heat transfer coefficient. With the analysis of 88 experiments, a correlation of the average Nusselt number for direct contact film condensation of steam/air mixture at an adiabatic vertical wall was proposed as functions of film Reynolds number, mixture Reynolds number, air mass fraction, and Jacob number. The average heat transfer coefficient for steam/air mixture condensation decreased significantly while air mass fraction increased. The average heat transfer coefficients also decreased as the Jacob number increased, and were scarcely affected by the film Reynolds number below a mixture Reynolds number of about 245,000.

• 음성과학
• /
• 제10권4호
• /
• pp.149-157
• /
• 2003

In this paper, we proposed the principal component analysis (PCA) fuzzy mixture model for speaker identification. A PCA fuzzy mixture model is derived from the combination of the PCA and the fuzzy version of mixture model with diagonal covariance matrices. In this method, the feature vectors are first transformed by each speaker's PCA transformation matrix to reduce the correlation among the elements. Then, the fuzzy mixture model for speaker is obtained from these transformed feature vectors with reduced dimensions. The orthogonal Gaussian Mixture Model (GMM) can be derived as a special case of PCA fuzzy mixture model. In our experiments, with having the number of mixtures equal, the proposed method requires less training time and less storage as well as shows better speaker identification rate compared to the conventional GMM. Also, the proposed one shows equal or better identification performance than the orthogonal GMM does.

• 복식
• /
• 제61권4호
• /
• pp.38-51
• /
• 2011

The purpose of this study is to offer data that designers can utilize substantially, by developing creative materials in knit fashion through the analysis relevant to expression characteristics on the mixture in high low class culture, which were shown in knit fashion of contemporary women, as one of methods of pursuing a plan for being able to be appeared creative and unique knit wear. As for a method of this research, studied concept and characteristics on the mixture in high low class culture by preceding researches. And women's knit fashion was selected that is seen to be 3~18 gauge among the world's 4 collections from 2000~2008. The analysis was made with the analytical frame in mixture pattern, and the analytical frame in design element, and item. The results are as follows. The mixture of kidult element and high fashion was shown with characteristic of expressing humor and fun with graffiti, expression like character and cartoon, and fairy-tale fantasy through the exaggerated trifling article. The mixture of grungy element and high fashion was shown with the expression characteristic in the mixture of heterogenous pattern, and in tear, slit without the end treatment due to fraying the end strand in the knit fashion with basic stitch, patch work, fringing and tone-down gray, use of khaki and blue color, and match in opposite color. The mixture of underwear and high fashion was shown the expression characteristic with the emphasis on underwear line like volume up, or with the mixture of details such as pants in diverse lengths, mini skirt, underwear lace, and ribbon.

• 대한원격탐사학회지
• /
• 제19권6호
• /
• pp.411-419
• /
• 2003

광학영상에서 개별 화소에 해당하는 공간은 반사특성이 상이한 두 개 이상의 지표물이 존재하는 경우가 대부분이나, 기존의 영상처리는 각 화소를 단일의 지표물로 가정하여 처리하였다. 본 연구에서는 분광혼합분석(spectral mixture analysis)을 이용하여 개개의 화소를 구성하고 있는 두 가지 이상의 지표물을 점유비율에 따라 분해하고 그 결과의 활용 가능성을 분석하였다. 경기도 광릉시 험림을 대상으로 Landsat-7 ETM+ 영상을 획득하여 대기보정 및 지형효과에 의한 복사보정을 실시하였다. 선형혼합모델을 통하여 각 화소를 6개 단위지표물(endmember)의 점유비율로 분해하였다. 각 endmember의 점유비율을 나타내는 영상들을 조합하여 보다 세부적인 임상분류가 가능하였다. 토양의 점유비율을 이용하여 수관울폐도와 관련된 정보의 추출도 가능하다고 판단된다. 또한 침엽수림의 화소값에 그늘에 의한 영향이 많다는 것을 알 수 있었다. 산림의 다양하고 복잡한 구성요소를 감안한다면 분광혼합분석은 기존의 영상처리방법에서 얻을 수 없었던 세부적인 산림정보의 추출을 위한 새로운 도구로 기대 된다.

• 토지주택연구
• /
• 제10권4호
• /
• pp.51-59
• /
• 2019

The government is encouraging the notice of obligatory reclaimed asphalt as a result of the economic and social positioning of green growth to reduce the amount of waste resources and to solve natural resource problems by recycling continuously generated waste resources. However, it is necessary to develop application guideline for each application to apply reclaimed asphalt to the site because quality control of the reclaimed asphalt is difficult and the specifications are ambiguous as well. Therefore, in this study, the mix design, quality test, performance test, and finite element analysis about reclaimed Asphalt Pavement were conducted to develop application guideline for reclaimed hot asphalt. The mix design was carried out for the comparative general hot mix asphalt mixture, the reclaimed hot mix asphalt mixture using the additive, and the reclaimed hot mix asphalt mixture without the additive. Indirect tensile strength and tensile strength ratio tests were used to characterize the reclaimed hot mix asphalt mixture. Using the results of dynamic modulus test and FWD test for KPRP analysis and finite element analysis, the performance life was evaluated for general pavement and pavement using recycled aggregate. Finally, the life cycle cost analysis was used to compare and analyze the economics of reclaimed asphalt concrete pavement.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.127-135
• /
• 2007

The objective of this study is to analyze the effect of velocity and vorticity on stratified mixture formation in the visualization engine. In order to investigate spray behavior, the pray velocity is obtained through the cross-correlation PIV method, a useful optical diagnostics technology and the vorticity calculated from the spray velocity component. These results elucidated the relationship between vorticity and entropy, which play an important role in the diffusion process for the early injection case and the stratification process for the late injection case. In addition, we quantified the homogeneous diffusion ate of spray using entropy analysis based on Boltzmann's statistical thermodynamics. Using these methods, we discovered that the homogeneous mixture distribution is more effective as a momentum dissipation of surrounding air than that of the spray concentration with a change in the injection timing. We found that the homogenous diffusion rate increased as the injection timing moved to the early intake stroke process, and BTDC $60^{\circ}$ was the most efficient injection timing for the stratified mixture formation during the compression stroke.

• 산업기술연구
• /
• 제22권A호
• /
• pp.83-87
• /
• 2002

Many industrial products such as paints, ink and adhesives are composed of the ingredients of a mixture. In mixture experiments, the characteristics of quality(response) depends only on the proportions of the ingredients and does not depend on the total amount of the mixture. This article discusses the constrained mixture experimental design, the data analysis, and the optimum formulation of ingredients based on the two quality characteristics - taste and flavor. It IS shown that efficient designs can be constructed from D-optimal criterion. Special cubic models were selected as the final mixture response surfaces for both reponses. The desirability function was used for the optimization of the two responses.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.28-41
• /
• 2004

The study is aimed to assess the usefulness of the mixture design for spent resin immobilization in cement. Although a considerable amount of research has been carried out to determine the limits for the composition of an acceptable resin-cement mixture, no efficient experimental strategy exists that explores the full properties of waste form against composition relationship. In order to gain an overall view, this report introduces the method of mixture design and mixture analysis, and describes the design of experiment of the 5-component mixture with the constraint conditions. The mathematic models of 28-day compressive strength varying with the ingredients are fitted, and the main effect and interaction effect of two ingredients are identified quantitatively along with the graphical interpretation using the response trace plot and contour plots.

• 한국식품영양학회지
• /
• 제3권2호
• /
• pp.169-176
• /
• 1990

Effects of metal chelating agents and metal ions on the volatile substance of cooked oil with chicken and pork mixture meat were examined by chemical analysis and sensory test. The addition of Na-tripolyphosphate(Na-TPP) to chicken and pork mixture meat increased the amount of H2S among volatiles evolved during cooking but decreased that of volatile carbonyl compounds(VCC) This treatment enhanced meat flavor in cooked oil with chicken and pork mixture. It was recognized that the increase in Ha5 evolution was caused by the rise of pH value. On the contrary cupric ion produced a negative effect on the production of chicken and pork mixture meat flavor and this addition increased VCC and TBA value. Other metal chelating agents such as citric acid, phytic acid and EDTA, provided the same results as Na-TPP. It was supposed that these phenomena were attributable to the chelating action to metal prooxidant in mixture meat at could be concluded that a proper evolution of H2S and protection against lipid oxidation during cooking were important to produce an excellent chicken and pork mixture meat flavor.

• 한국대기환경학회지
• /
• 제25권6호
• /
• pp.503-511
• /
• 2009

VOC mixture was fed to a trickle bed air biofilter (TBAB) with step-change in influent mixture concentrations from 50 ppmv to 1,000 ppmv, corresponding to loadings of $5.7\;g/m^3/hr$ to $114.1\;g/m^3/hr$. VOC mixture was an equimolar ratio of two aromatic VOCs, i.e., toluene and styrene, and two oxygenated VOCs, i.e., methyl ethyl ketone (MEK) and methyl isobutyl ketone (MIBK). The TBAB system employed backwashing as biomass control. The experimental results showed that a critical loading rate for VOC mixture removal was determined to be about $60\;g/m^3/hr$, and critical loading rates for individual VOCs in the mixture were different. Specifically, toluene content in the mixture played a major role in the biofilter overall performance. As VOC mixture was fed beyond the critical loading rate, reacclimation of the biofilter to reach the 99% removal efficiency following backwashing was delayed, which was a critical factor in the biofilter performance. In the mass balance analysis, 63.8% of the carbon equivalent in VOCs removal was used for $CO_2$ production during the experimental runs. The 82.6% nitrogen utilized in the biofilter was contributed to microbial cell synthesis. The obtained results were compared against consistently high efficient performance of TBAB for VOC mixture by employing backwashing as biomass control.