• 소성∙가공
• /
• 제29권1호
• /
• pp.11-19
• /
• 2020

For microstructural analysis of a friction stir welded (FSWed) joint of advanced high-strength steels, dual phase (DP) and complex phase (CP) steels, are studied. FSWed joints are successfully fabricated in the following four cases: (i) DP/DP; (ii) CP/CP; (iii) DP/CP, where the advancing side is DP and the retreating side is CP; (iv) CP/DP, where the advancing side is CP and the retreating side is DP. The stir zone (SZ) of (i) the DP/DP joint mainly consists of lath martensite, while the stir zone of (ii) the CP/CP joint consists not only of lath martensite but also of bainite. In the case of (iii) DP/CP and (iv) CP/DP, they exhibit a similar microstructure including acicular-shaped phases in the joints; however, cross-sections of the joints show differences in material mixing in each case. In (iv) the CP/DP joint, temperature towards the CP steel is sufficient to cause softening, thus leading to better mixing than that in (iii) DP/CP. The phases of the SZ in each of the four cases are formed by phase transformation during the FSWed process; however, the transformed phase volume fraction of CP steel is lower than that of DP steel, indicating that dynamic recrystallization occurs mainly in CP steel. The hardness values of the SZ are significantly higher than those of the base materials, especially, the SZ of (iii) the DP/CP joint has the highest value due to highest fraction of lath martensite.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.155-166
• /
• 1999

The construction of the coastal structures and reclamation work causes the circulation reduced in the semi-closed inner water area and the unbalanced sediment budget of beach results in an alteration of beach topography. Among the various fluid motions in the nearshore zone water particle motion due to wave and wave-induced currents are the most responsible for sediment movement. Therefore it is needed to predict the effect of the environmental change because of development and so the prediction of wave transformation dose. The purpose of this study is to introduce the relation between waves wave-induced currents and sediment movement. In this study we will show numerical method using energy conservation equation involving reflection diffraction and reflection and the surfzone energy dissipation term due to wave breaking is included in the basic equation. For the wave-induced current the momentum equation was combined with radiation stresses lateral mixing and friction Various information is required in the prediction of wave-induced current depending on the prediction tool. We can predict changes in wave-induced current from the distribution of wave especially near the wave breaking zone. To evaluate these quantities we have to know the local condition of waves mean sea level and so on. The results from the wave field and wave-induced current field deformation models are used as input data of the sediment transport and bottom change model. Numerical model were established by a finite difference method then were applied to the development plan of the eastern Pusan coastal zone Yeonhwa-ri and Daebyun fishing port. We represented the result with 2-D graphics and made comparison between before and after development.

• 물과 미래
• /
• 제27권2호
• /
• pp.73-83
• /
• 1994

확산현상, 표사유동 및 인간의 여러 활동이 실제 연안해역에서 일어나므로 연안해역 해수운동의 물리적 특성을 파악하고 해석하는 것은 중요한 의미를 지닌다. 본 연구에서는 연안해역에서의 파랑변형과 평균해수위 변동 그리고 연안유속 분포양상에 대해 여러 인자들이 미치는 영향을 2차원 유한차분 모형(ADI, Up-wind)을 이용하여 분석하였다. 계산결과로는 수치모형을 해저경사가 일정한 2차원 지형에 적용하여 해저경사, 입사파고, 파향각, 파주기, 마찰계수 및 수평확산계수가 연안해역 특히 쇄파대내에서 파랑변형, 평균해수위 변동 및 연안유속 분포에 미치는 영향을 분석하였다.

• 한국습지학회지
• /
• 제13권2호
• /
• pp.265-273
• /
• 2011

지하수-지표수 혼합구간(Hyporheic zone)은 지표수와 지하수의 온도변화에 민감하게 반응하는 구간이다. 지표수의 경우 대기온도에 영향을 받아 온도의 변화주기가 짧은 반면, 상대적으로 지하수는 온도 변화주기가 길다. 본 연구에서는 지하수-지표수 혼합구간의 유동강도와 방향을 고려하여 깊이별 온도의 수직적 분포특성 분석하였다. 현장자료를 이용한 1차원 열전달 해석 수행결과, 지하수-지표수 혼합구간에서 지하수 유출과 지표수의 유입이 일어나는 지점에서 온도의 분포는 상이한 양상을 보였다. 혼합구간의 수직적 온도 분포의 변화는 하천기저에서 가장 두드러지게 나타났다. 또한 열전달 해석 결과를 바탕으로 연구지 혼합구간의 온도분포는 유동강도보다 유동방향에 지배받았다.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.361-371
• /
• 2000

A demand of marine outfall system has been much increased for the effective disposal of the wastewater due to population and industrial development at the coastal areas. The outfall system discharges primary or secondary treated effluent into the coastline, or at the deep water, or between these two. The discharge is carried out by constructing a pipeline on the sea bed with a diffuser or with a tunnel, risers and appropriate. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. Thus there have been growing interests about plume behaviour around the outfall system. Plume or jet discharged from single-port or multi-port diffuser might cause certain impacts on coastal environment. Near field mixing characteristics of discharged water field using CORMIX model have been studied for effective outfall design various conditions on ambient current, depth, flow rate, effluent concentration, diffuser specification, port specification etc.. This kind of analysis is necessary to deal with water quality problems caused by the ocean discharge. The analyzed result was applied to the Pusan Jungang effluent outfall system plan.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권3호
• /
• pp.23-31
• /
• 2020

The performance of a downward-irradiation sonoreactor was investigated using calorimetry, KI dosimetry, luminol (Sonochemiluminescence, SCL) method, and aluminium foil erosion method as one of the basic steps for the optimal design of downward-irradiation sonoreactors. The applied frequency was 28 kHz and the input electrical power was 280 - 300 W. The liquid height, from the reactor bottom to the transducer module surface, ranged from 1λ (53.6 mm) to 2λ (107.1 mm). For various liquid heights, the magnitude of calorimetric power and the mass of cavitation-generated I₃^- ion varied significantly. It was found that the additional application of mechanical mixing resulted in higher sonochemical activity, especially in the cavitational active zone, which was induced by violent liquid flow in the reactor. In aluminium foil erosion tests, it was found that less ultrasound energy reached the bottom of the reactor due to the violent liquid flow and no significant sonophysical effect was observed for higher mixing rate conditions (100 and 200 rpm).

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.1011-1016
• /
• 2008

KIVA3V를 이용하여 모형 가스터빈 연소기에서 Jet-A의 분무와 연소에 관한 수치해석을 하였다. 연소기 형상은 6개의 희석홀을 가지며, 스월효과를 고려하였다. 연소 특성을 해석하기 위해 열적 NO 발생을 고려하였다. 다양한 분무각에 대해서 Jet-A 증기, 화염온도 분포와 NO 발생량에 대하여 비교하였다. 분무각이 커질수록 1차 영역에서 연료 증기가 비교적 고르게 나타나게 되며 증발이 더욱 빠르게 되고, 주변 기체와 연료 증기 사이의 혼합이 증가한다. 그 결과 고온부가 넓게 나타나게 되고, 이에 의해 열적 NO 발생이 증가한다.

• 물과 미래
• /
• 제28권6호
• /
• pp.107-118
• /
• 1995

갈수기를 포함한 자연하천에서의 오염물질의 확산 및 이동 거동을 정확하게 예측하기 위하여 하천수로의 존재하는 저장대의 영향과 저장대에서의 오염물질의 저장 및 재방출 과정을 보다 정확하게 설명할 수 있는 수학적 모형을 개발하였다. 수학적 모형은 수치해석적인 방법에 의해 해를 구하고, 실험자료를 통해 검증하였다. 저장대에서의 오염물질의 저장과정을 설명하기 위한 두 개의 서로 다른 저장과정 부모형을 결합시킨 모형의 모의결과, 두 모형의 정확도에 있어서는 서로 대등하지만, 저장-확산 모형이 저장-교환 모형보다 저장 및 교환과정을 물리적으로 더욱 정확하게 표현할 수 있음이 밝혀졌다. 본 연구에서 개발된 저장-교환모형과 저장-확산 모형은 자연 하천으로 방류된 오염물질의 확산 및 혼합특성을 예측하는 모형으로서 종래의 1차원 확산모형에 비해 월등히 개선된 모형으로 판단된다.

• 한국연소학회지
• /
• 제14권1호
• /
• pp.31-38
• /
• 2009

The effects of acoustic excitation of coaxial air on mixing enhancement and reduction of nitrogen oxides (NOx) emission were investigated. A compression driver was attached to the coaxial air supply tube to impose excitation. Measurements of NOx emission with frequency sweeping were performed to observe the trend of NOx emission according to the fuel and air flow conditions and to inquire about the effective excitation frequency for reducing NOx. Then, Schlieren photographs were taken to visualize the flow field and to study the effect of excitation. In addition, phase-locked particle image velocimetry (PIV) was performed to acquire velocity field for each case and to investigate the effect of vortices more clearly. Direct photographs and OH chemiluminescence photographs were taken to study the variation of flame length and reaction zone. It was found that acoustic forcing frequencies close to the resonance frequencies of coaxial air supply tube could reduce NOx emission. This NOx reduction was influenced by mixing enhancement due to large-scale vortices formed by fluctuation of coaxial air jet velocity.

• 한국해양학회지
• /
• 제6권2호
• /
• pp.99-103
• /
• 1971

GEK(Geomagnetic Electrokinetograph)가 개발되고 그에 대한 취급의 간편, 측정의 용이, 정도의 우수성으로 GEK를 이용한 많은 관측이 수행되고 또 그들 자료를 바탕으로 많은 연구에 임하고 있어, 지금은 해양관측에 있어 필수의 기계로서 이것으로 해류조사를 행한다고 하는 것은 널리 알려진 바이다. 그러나 여기에서는 " 사쓰난"(살남) 해역 (일본 구주 남서방해역)과 같이 조석류와 복잡한 해저지형 및 대소다양한 도서의 분포 등으로 영향 받는 해역에서의 GEK 측정은 타해역 (일본 본주 남방의 흑조류역 등)에서 행하여지는 것 같이 쉽지 않다고 볼 수 있다. 여기에 일본 사쓰난해역에서 조사된 GEK의 측득치에 대하여 검토하였다.대하여 검토하였다.