• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.161-167
• /
• 2009

The regulation of the $CO_2$ emit from vehicles have become much more stringent in recent years. This stringent regulation is more request vehicle manufacturers to develop the alternative fuel vehicles for reducing exhaust emissions. LPG fuel is more clean energy compares with gasoline and diesel fuel. Especially, $CO_2$ emission of LPG Vehicle is less than gasoline vehicle and almost equal to diesel vehicle. For this reason, recently korean government is extending LPG fuel for hybrid car and light duty vehicle. In domestic, Propane is mixing $15{\sim}30%$ to butane for improvement of cold start at winter season. Therefore, In this paper was investigated that the characteristics of emissions according to propane mixing rate with 0, 10, 20, 30% were compared and analyzed by the vehicle test using LPG vehicle according to the FTP75 mode. It was also investigated the characteristics of nano-particle emit with propane mixing rate.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.149-156
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• 한국연소학회지
• /
• 제11권1호
• /
• pp.19-26
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.654-660
• /
• 2018

The dependence on global fossil fuels has been gradually reducing all over the world. Some countries which recognized the important of environmental values were joining to carry out international GHG goals. Our country has also participated with high targets (37% reduction compared to BAU 2030 years). So we need to supply materials of lower GHG value such as a bio-diesel. Bio-alcohol is one of the similar bio-fuels that can be reducing GHG. A lot of countries had tried to commercialize through various R&D for bio-alcohol. In this study, we analyzed the fuel characteristics of bio-alcohol fuel produced by domestic technology. And we evaluated a possibility to use as vehicle fuel through mixing of bio-alcohol and gasoline. The mixed fuels were satisfied with 2.3 wt% of oxygen content that is standard of the petroleum and petroleum alternative fuel business Act. We tried to evaluate a emission characteristic of vehicle by mixed fuel. In accordance with the results we tried to find a correlation between fuel and emission.

• 한국응용과학기술학회지
• /
• 제33권2호
• /
• pp.264-270
• /
• 2016

음식물류폐기물의 에너지 잠재량은 2,206 천TOE 임에도 대부분 사료화와 퇴비화로 약 85.5%가 재활용 되고 있으며, 해당 시설에서 생산된 제품 중 사료화는 72%, 퇴비화는 61%가 무상판매되고 있다. 이에 본 연구는 음식물류폐기물을 반탄화 반응을 이용하여 연료화하고자 한다. 하지만 음식물류폐기물만 단독으로 연료화 할 경우 연료적 가치가 낮아짐을 예방하고자 하수슬러지를 일정 비율로 혼합하여 진행하였다. 음식물류폐기물과 하수슬러지의 혼합비율은 10:0, 8:2, 6:4, 5:5로 하였다. 실험 결과 혼합 비율에 상관없이 반응온도 $240^{\circ}C$이상에서 함수율 10% 이하로 감소하는 것을 확인 할 수 있었다. 고정탄소의 경우 반응온도가 높아질수록, 하수슬러지의 비율이 높아질수록 증가하였으며, 초기 1.1%에서 최대 약 36% 로(혼합비율 6:4, 반응온도 $270^{\circ}C$) 측정 되었으며, 발열량의 경우 반응온도 $240^{\circ}C$부터 고형연료제품기준인 3,000Kcal/Kg 이상에 만족하는 발열량을 나타내었으며, 초기시료보다 약 6배 정도 증가한 발열량을 얻을 수 있었다. Van krevelen Diagram이 Lignite 범위까지 이동하였으며, 슬러지 혼합비율이 높아질수록 높은 연료비와 5,500Kcal/kg 이하의 연소성지수를 얻을 수 있었다. 하수슬러지 혼합 비율이 높아질수록 발열량은 감소하지만, 고정탄소 함량 증가, 연료비 개선 등으로 음식물류폐기물만 단독 고형연료화 한 것 보다 연료로써의 품질이 좋아지는 것을 확인 할 수 있었다.

• 한국연소학회지
• /
• 제20권2호
• /
• pp.40-45
• /
• 2015

This study is aimed to study combustion characteristics of low $NO_X$ burner using petroleum cokes as fuel. The petroleum coke, which is produced through the oil refining process, is an attractive fuel in terms of its high heating value and relatively low price. But petroleum coke is a challenging fuel because of its low volatile content, high sulfur and nitrogen content, which give rise to undesirable emission characteristics and low ignitability. The petroleum cokes burner is operated at fuel rich condition, and overfire air are supplied to achieve fuel lean condition. The low $NO_X$ burner is designed to control fuel and air mixing to achieve air staged combustion, in addition secondary and tertiary air are supplied through swirler. Air distribution ratio of triple staged air are optimized experimentally. The result showed that $NO_X$ concentration is lowest when overfire air is used, and the burner function at a fuel rich condition.

• 오토저널
• /
• 제13권2호
• /
• pp.50-66
• /
• 1991

There are many factors which influence on the performance of a diesel engine. The piston bowl shape and swirl ratio are important factors to enhance the fuel-air mixing and flame propagation. In this study, calculations of the flow field in the cylinder of the diesel engine were carried out using the CONCHAS-SPRAY code for different bowl shapes and swirl ratios. In the case of constant swirl ratio, vortices which affect fuel-air mixing, evaporation and flame propagation are generated more strongly and consistently in the bowl-piston type combustion chamber than in the flat piston type. With this strong squish effect, injected fuel droplets are widely diffused and rapidly evaporated in the bowl-piston type combustion chamber. Especially a strong squish is developed and large and strong vortices are generated in the edge cutted bowl piston chamber. As the swirl ratio increases, it is found that a large and strong squish and vortices are generated in the combustion chamber and also fuel droplets are diffused into the entire combustion chamber.

• 한국분무공학회지
• /
• 제13권1호
• /
• pp.16-21
• /
• 2008

In the present study, the 2-fluid nozzle and 3-fluid nozzle to atomize the diesel and water with air for the fuel reformer of SOFC system were experimentally examined. In the 2-fluid nozzle, the diesel and water were alternately atomized due to bislug flow pattern, and it implies that the mixing of both liquids strongly affects the atomization pattern. On the other hand, in the 3-fluid nozzle, the diesel and water were atomized simultaneously due to the separated injection channels without mixing problem. Therefore, compared to the 2-fluid nozzle, the 3-fluid nozzle is suitable for the stable operation of the fuel reformer. In case of the 3-fluid nozzle, Type A where the air was supplied through the central channel was the most efficient.

• 유기물자원화
• /
• 제15권3호
• /
• pp.106-112
• /
• 2007

본 연구는 하수슬러지 케이크와 타르, 피트모스를 혼합하여 연료 및 보조연료로써 활용이 기능하도록 안정된 발열랑을 가지는 혼합비를 도출하고, 제조된 고형연료의 연소특성과 대체연료로써의 RDF의 적용가능성을 확인하는데 목적이 있다. 각각의 개별 발열량은 하수슬러지 케이크와 피트모스가 4000~4500kcal/kg 비슷하였으며, 타르의 발열량은 7000kcal/kg로 가장 높은 것으로 나타났다. 또한, 발열량 6,000kcal/kg 이상으로 하는 적정 혼합비를 (하수슬러지케이크 : 타르 : 피트모스) 1 : 4 : 1에서 1: 7 : 1까지로 하여 길이 1.6cm, 직경 1.3cm, 중량 2.3g의 고형연료를 제조하였다. 제조된 고형연료의 RDF 적용가능성 분석결과, 배기가스 분석에서는 혼합비에 따라 발생되는 배기가스의 성분농도가 크게 변하지 않았으며, 고형연료의 불꽃 지속시간은 5분 내외로 동일 질량 2.3g을 연소시킨 일반 무연탄과 지속시간이 비슷한 것으로 나타났다. 따라서 본 연구에서 제조한 고형연료의 연료 및 보조연료로서의 활용이 기능할 것으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1116-1121
• /
• 2004

In this study, the effect of central fuel injection on a coaxial laminar $CH_{4}/air$ flame was experimented at the defined premixing condition(${\Phi}=1.90$, ${\sigma}=50/75/100%$, x/D=10). The partial premixing parameter are the equivalence ratio that total fuel is fixed at 200cc/min, the fuel split degree which means the percentage of fuel entering the outer tube to the total amount, and the mixing distance indicating the nonreactant mixture's homogeneity between inner tube top and burner exit. The object is to investigate the flame structure and chemiluminescence characteristics of laminar partial premixed flame as changing mixing parameters. The radical signal was acquired from ICCD camera and PMT. Each intensity was compared with Abel inverted value for measuring the effect of background light on the peak signal location and the intensity at central preheat zone. The results show that the peak location of each radical was broaden as the fuel split degree increasing because the mixing quality was enhanced. and $OH^{\ast}$ is a good indicator for flame front between reaction and preheat zone. At last $CH_{2}^{\ast}$ has the same tendency with $CH^{\ast}$ but a thinner reaction zone than $CH^{\ast}$ due to a rapid decay on the burned gas side.