• Journal of the Korean Mathematical Society
• /
• v.46 no.6
• /
• pp.1319-1338
• /
• 2009

In this paper, using proximal-point mappings technique of Raccretive mappings and the property of the fixed point set of set-valued contractive mappings, we study the behavior and sensitivity analysis of the solution set of the system of parametric generalized quasi-variational inclusions involving R-accretive mappings in real uniformly smooth Banach space. Further under suitable conditions, we discuss the Lipschitz continuity of the solution set with respect to parameters. The technique and results presented in this paper can be viewed as extension of the techniques and corresponding results given in [3, 23, 24, 32, 33, 34].

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.548-552
• /
• 1994

The robust compensation controller, which has been proposed by one of the authors and is based on the fundamental principle of making the plant follow the reference model, consists of the reference model and the robust compensator. The reference model is constructed by using the nominal model of the plant and determines the input-output properties of the resultant system. The robust compensator is obtained as a solution of the mixed sensitivity problem in H infinity control theory. Therefore the resultant system is of low sensitivity and robust stability. In the case where uncertainty does not occur in the plant, the plant follows perfectly the reference model. Therefore, in the case where uncertainty occurs in the plant, we propose the system configuration which improves the following accuracy without replacing the 개bust compensator but by identifying, the plant and reconstructing the reference model.

• Journal of the Korean Ceramic Society
• /
• v.29 no.6
• /
• pp.441-450
• /
• 1992

The microstructur and LPG sensing properties of maghemite (${\gamma}-Fe_2O_3$) ceramics have been studied. The acicular and fine spherical shaped iron oxide particles were sintered at below $900^{\circ}C$. The maghemite ceramics were prepared by reduction-oxidation of sintered iron oxide. With the microstructure of acicular and/or fine grains, the maghemite ceramics have good LPG sensing properties. Increased sintering temperature deteriorates the LPG sensitivity of maghemite ceramics due to the grain growth. The maghemite ceramics prepared from the mixed iron oxide, of a large amount of acicular particles and a small amount of spherical ones, have a lower LPG sensitivity than that of the acicular iron oxide ceramics. But, they seem to be of higher mechanical strength. The optimum working temperature for LPG sensing of the maghemite ceramics was found to be $300~350^{\circ}C$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1633-1640
• /
• 2000

The finite element analysis (FEA) is widely used in modem structural dynamics because the performance of structure can be predicted in early stage. However, due to the difficult in determination of various uncertain parameters, it is not be easy to obtain a reliable finite element model. To overcome these difficulties, updating program of FE model is developed by consisting of pretest, correlation and updating. In correlation, it calculates modal assurance criteria, cross orthogonality, mixed orthogonality and coordinate modal assurance criteria. For the model updating, the continuum sensitivity analysis and design optimization tool (DOT) are used. The SENSUP program is developed for model updating to obtain physical parameter sensitivity. The developed program is applied to practical examples such as the base plate of HDD, BLDC spindle motor, and upper housing of induction motor. And the sensor placement for the square plate is compared using several methods.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.38-43
• /
• 1996

A coprecipitation method was used for preparing Ca and Pt doped $SnO_2$ fine powder. Components of the powder were investigated by XPS and SIMS. Crystallite size and specific surface area were investigated by TEM, XRD, and BET analysis. $SnO_2$(Ca)/Pt based thick film devices were prepared by a screen printing technique for methane gas detection. Then sensing characteristics of the devices were investigated. As Ca and Pt added, the crystal growth of $SnO_2$ was suppressed during calcining and sintering, and the sensitivity of $SnO_2$(Ca)/Pt thick film to methane gas was enhanced. For the Pt doped $SnO_2$ fine particle, the thick film device shows sensitivity of about 83% to 2000 ppm methane gas at an operating temperature of >$400^{\circ}C$.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.314-318
• /
• 2007

Purpose: Pressure sore wound develops inevitably in long-term, immobilized and hospitalized patients. Sore wound infection is common problem and makes healing process difficult. We aimed to identify the pathogens of the purulent discharge in sore wound and to obtain information for appropriate antibiotics through a sensitivity test Methods: The bacteriologic study was made on 120 cases of patients who admitted or visited our hospital from 2004 January to 2005 December for sore wound treatment. Culture material was collected in BBL transport media with cotton swab and cultured by MacConkey agar plate. The method of MIC by VITEK and Microscan was used for sensitivity test. Results: Among 120 specimens, organisms were isolated from 77(64.2%) cases. Gram positive organisms were cultured in 73 specimens, Gram negative organisms in 46 specemens, and fungi in 2 specimens. Mixed infection by Gram (+) and Gram (-) bacteria were observed in 34 specimens. Among them, S. aureus was the most common isolate in 24(31.2%) patients and 10 (13.0%) S. Aureus isolates were MRSA. The most prevalent Gram-negative organism was Escherichia coli in 20 patients(25.9%). Vancomycin and teicoplanin showed highest sensitivity to Gram-positive organisms and imipenem and amikacin to Gram-negative organisms. Conclusion: Pressure sore wound demands consideration of multimodal therapeutic aspects and these findings would be useful informations to physicians, nurses and clinical assistants in understanding the nature of sore wound and selecting appropriate antibiotics.

• The Korea Journal of Herbology
• /
• v.30 no.2
• /
• pp.37-42
• /
• 2015

Objectives : The aim of this study was to investigate the effects of licorice supplementation on muscle injury, plasma cortisol, testosterone and insulin sensitivity after high intensity resistance exercise. Methods : The fourteen health college male students were voluntarily participated in this study and were randomly divided into 2 groups: Control group (CON, n=7), Licorice group (LR, n=7). LR group ingested 2 g/time of licorice extract (mixed with 100 ml of water) two times/day for 10 days while the CON group ingested 100 ml of water. All subjects performed a high intensity resistance exercise (half-squat, 8 RM at 80% one-repetition maximum, 5 sets, 1min rest). Blood samples were collect before (-7) and after (0) licorice supplementation, and then 1 day, 2 day and 3 day post exercise. After 10 day treatment, plasma creatine kinase, cortisol, testosterone, glucose, insulin were measured. To determine the insulin sensitivity, HOMA-IR was calculated. Results : Plasma creatine kinase activities were significantly elevated after exercise, but there was not different between two groups. The plasma cortisol and testosterone levels were not significantly different between two groups. Plasma glucose levels were increased at 1 day and 2 day after exercise in the LR comparing with CON group (P<0.05) but plasma insulin levels were significantly lower in comparison with CON. HOMA-IR were significantly lower in the LR than CON group at 0 day to 3 day (P<0.05). Conclusions : The results of the current study suggest that licorice supplementation for 10 days might not attenuate the high-intensity exercise-induce muscle injury but may enhance the whole-body insulin sensitivity.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.535-545
• /
• 2008

This paper introduces a systematic top-down and bottom-up design methodology to assist the designer in the implementation of continuous-time (CT) cascade sigma-delta (${\Sigma}{\Delta}$) modulators. The salient features of this methodology are (a) flexible behavioral modeling for optimum accuracy-efficiency trade-offs at different stages of the top-down synthesis process, (b) direct synthesis in the continuous-time domain for minimum circuit complexity and sensitivity, (c) mixed knowledge-based and optimization-based architectural exploration and specification transmission for enhanced circuit performance, and (d) use of Pareto-optimal fronts of building blocks to reduce re-design iterations. The applicability of this methodology will be illustrated via the design of a 12-bit 20 MHz CT ${\Sigma}{\Delta}$ modulator in a 1.2 V 130 nm CMOS technology.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.352-355
• /
• 2001

A null lens is designed for testing the hyperbolic mirror which is the first mirror of the off-axis three mirror anastigmat(TMA) designed as a high resolution camera for remote sensing. To choose a better null lens system for the hyperbolic surface under test, both autostigmatic and mixed type null lenses are designed and analysed for sensitivity with respect to change of each surface parameter such as the radius of curvature and the thickness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.241-242
• /
• 2019

This technology is a water leak repair technology using composite materials of concrete structures that block leakage of structures by injecting rapid microcement into the face of underground concrete to block water and injecting flexible glycidylacrylate. Rapid micro cement system repair materials are mixed with fine fibers to improve the flexural sensitivity of the material and to form a layer that blocks stabilized water at the back of the structure by allowing rapid and tight spatial filling during injection with high cohesion The glycidylacrylate repair material can control the expansion rate, and the external stress also has the characteristic that the form of the material is not destroyed or separated, which can also be applied to vibrating induced structures that produce repetitive fatigue loads, and has an effective durability in saline, alkali, acid (chloric acid, sulfuric acid, nitric acid).