• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.425-431
• /
• 2007

To investigate genetic diversity and PCR detection of Rhizina undulata, PCR detection and sequence analysis of rDNA ITS region of R. undulata in soil were analyzed and developed. The length of partial 18S rDNA from four R. undulata isolates were 1,375 nt. The sequence similarity of R. undulata isolates was 100%. The rDNA ITS regions of R. undulata isolates were 585 nt long. Nucleotide sequencing of the ITS regions showed that PDK-1, PTT-1 and PDJ-9 isolates had 100% sequence identity. But, PDS-5 isolate differed from the three isolates by two nucleotide substitution. R. undulata-specific primers designed by the sequence of ITS region were used in PCR detection of R. undulata. PCR products about 525 bp size, which is specific to R. undulata, were amplified from total DNAs of R. undulata isolates. To assay the sensitivity of PCR detection by R. undulata ITS-specific primer, purely cultured mycelial suspension of R. undulata was serially diluted and mixed with 100g of sterile sandy loam soil, respectively. And then, PCR products of total DNAs extracted from each mycelium-soil mixtures were analysed. The PCR protocol could detected up to 1ng mycelium of R. undulata within 100g of soil.

• Journal of the Korean Chemical Society
• /
• v.40 no.2
• /
• pp.109-116
• /
• 1996

A matrix modification was studied for the determination of trace germanium in mineral waters by electrothermal atomic absorption spectrophotometry (ET-AAS). For this, the type and quantity of modifier as well as the use of auxiliary modifier were investigated to realize the efficient modification. Germanium suffers from low sensitivity and poor reproducibility in ET-AAS determination because of the premature loss of germanium via volatile germanium monoxide formation when heated in the presence of carbon. Therefore, the addition of a matrix modifier is necessary to stablize the germanium, thermally and chemically. By the addition of palladium (10 ${\mu}g/mL)$ as a single modifier to the sample containing 500 ng/mL germanium, the charring temperature could be raised from 800 to $1000^{\circ}C$, and its absorbance was also increased, but the atomization temperature was not raised. In this case, the absorbance of germanium was not changed in the range of 10∼70 ${\mu}g/mL$ of palladium added. On the other hand, it was considered that the use of a mixed modifier could modifiy the matrix more effectively than with a single modifier. The best results were obtained by using 1% ammonium hydroxide as an auxiliary modifier together with 10 ${\mu}g/mL$ palladium. The charring temperature could be raised from 800 to $1100^{\circ}C$, without any change of the atomization temperature. With above optimum conditions, the trace amount of germanium in several mineral waters were determined by a calibration curve method, and good recoveries of more than 95% were also obtained in the samples in which a given amount of germanium was spiked. The detection limit of this method was about 6.9 ng/mL.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.369-375
• /
• 1997

$V_{2}O_{5}/ThO_{2}/Pd$-doped $SnO_{2}$ sensor has a good selectivity and stability to CO at high sensor temperature of about $500^{\circ}C$, and shows rapid response. In particular, many kinds of interference gases, such as $NO_{x}$, $C_{3}H_{8}$, $CH_{4}$ and $SO_{2}$ have been found to give only a slight influence on the sensor selectivity to CO gas sensitivity by doped $V_{2}O_{5}$ (3.0 wt.%). For the sensor we used well-known thick film technological route with $V_{2}O_{5}$(3.0 wt.%), Pd(1.0 wt.%) and $ThO_{2}$(l.5 wt.%) as catalytic materials. In the case of mixed $NO_{x}$-CO gases, as combustion exhaust gas, only CO detection by $SnO_{2}$ type semiconductor sensor is generally very difficult because of $NO_{x}$ interference. The developed sensors can use to measure the exhausting gas of the automobile or the boiler for the Air-to-Fuel ratio control.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.573-580
• /
• 2021

This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.2
• /
• pp.135-146
• /
• 2001

Background : One of the important mechanisms responsible for a tumor escaping the immune response is an absence of the tumor associated antigen (TAA) on the cancer cell surface. To overcome this, combination gene therapy using a herpes simplex thymidine kinase (HSTK) gene, prototype of drug sensitizing gene, was conducted to enhance T AA release by cell destruction, as well as the cytokine genes for immune cell attraction. Methods : We investigated whether or not transduction with the adenovirus-HSTK (Ad-HSTK) enhanced the sensitivity of Lewis lung carcinoma (LLC) to ganciclovir (GCV) and induced a bystander effect. A Tumor vaccine trial was performed using LLC with ad-HSTK$\pm$ad-GM-CSF$\pm$ad-IL-2 to determine if they exhibit some antitumor effect on established lung cancer xenografts. Results : LLC with ad-HSTK revealed a much higher sensitivity to ganciclovir (GCV). LLC transduced with ad-HSTK and/or ad-IL-2, ad-GM-CSF showed a lower in vivo tumorigenicity. In the treatment experiment, vaccination with LLC transduced with ad-HSTK, ad-IL-2, or ad-GM-CSF alone modestly suppressed the growth of an established tumor. Combined transduction with HSTK and GM-CSF induced stronger growth suppression of a established lung cancer, while HSTK and IL-2 combination transduction did not have any antitumor effect on individual transduction. Vaccination with LLC-HSTK-GM-CSF increased the infiltration of dendritic cells in the spleen. Conclusion : It was concluded that a tumor vaccine transduced with HSTK and GM-CSF induces strong antitumor immunity by activating the dendritic cells.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.59-68
• /
• 2003

Background : In intubated patients, cultures of endotracheal aspirates (EA) are apt to contamination throughout the endotracheal tube. Therefore, the identification of etiologic agents via conventional EA cultures is not always reliable. In order to differentiate a pulmonary infection from a non-infectious disease, and to identify the true etiologic agent of acute pulmonary infection, blinded protected specimen brushing (PSB) was used, and its efficacy evaluated. Methods : In 51 intubated patients, with suspected pneumonia, blind PSB were performed, and the results compared with blood and EA cultures. A protected specimen brush was introduced through the endotracheal tube, and settled at the affected large bronchus. A specimen brush was introduced to the expected region using the blind method. The tip of the brush was introduced with an aseptic technique after vigorously mixed for 1 minute in $1cm^3$ of Ringer's lactate solution. The specimens were submitted for quantitative culture within 15 minutes, with a culture being regarded as positive if the colony forming units were above $10^3/ml$. Results : Of the 51 patients, 15 (29.4%) had community-acquired pneumonia (CAP), 27 (52.9%) hospital-acquired pneumonia (HAP) and 9 (17.6%) non-infectious diseases. The sensitivity and specificity of the quantitative PSB culture for the diagnosis of pneumonia were 52.4 and 88.9%, respectively. The sensitivity and specificity of EA were 78.6 and 77.8%, respectively. The blind PSB was superior to the EA for the identification of true etiologic agents. Of 53 episodes of 27 HAP patients, MRSA (Methicillin-resistant staphylococcus aureus) (41.5%) was the most common causative agent followed by Pseudomonas aeruginosa (15.1%), Klebsiella sp. (7.5%) and Acinetobacter sp. (7.5%). Conclusions : As a simple, non-invasive diagnostic modality, the blind PSB is a useful method for the differentiation of a pulmonary infection from non-infectious diseases and to identify the etiologic agents in intubated patients. A blind PSB can be performed without bronchoscopy, so is safer, more convenient and cost-effectiveness for patients where bronchoscopy can not be performed.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.1
• /
• pp.29-41
• /
• 2001

Background : The appearance of multiple-drug-resistant Mycobacterium tuberculosis strains has been seriously compromising successful control of tuberculosis. Rifampin-resistance, caused by mutations in the rpoB gene, can be indicative of multiple-drug-resistance, and its detection is of great importance. The present study aimed to develop an oligonucleotide chip for accurate and convenient screening of drug-resistance. Methods : In order to detect point mutations in the rpoB gene, an oligonucleotide chip was prepared by immobilizing specific probe DNA to a microscopic slide glass by a chemical reaction. The probe DNA that was selected from the 81 bp core region of the rpoB gene was designed to have mutation sites at the center. A total of 17 mutant probes related to rifampin-resistance including 8 rifabutin-sensitive mutant probes were used in this study. For accurate determination, wild type probes were prepared for each mutation position with an equal length, which enabled a direct comparison of the hybridization intensities between the mutant and wild type. Results : Mycobacterial genomic DNA from clinical samples was tested with the oligonucleotide chip and the results were compared with those of the drug-susceptibility test in addition to sequencing and INNO-LiPA Rif. TB kit test in some cases. Out of 15 samples, the oligonucleotide chip results of 13 samples showed good agreement with the rifabutin-sensitivity results. The two samples with conflicting result also showed a discrepancy between the other tests, suggesting such possibilities as existence of mixed strains and difference in drug-sensitivity. Further verification of these samples in addition to more case studies are required before the final evaluation of the oligonucleotide chip can be made. Conlcusion : An oligonucleotide chip was developed for the detection of rpoB gene mutations related to drugsusceptibility. The results to date show the potential for using the oligonucleotide chip for accurate and convenient screening of drug-resistance to provide useful information in antituberculosis drug therapy.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.378-387
• /
• 2023

Petrochemical is an energy consuming industry that consumes about 30% of total industrial energy consumption and is a representative carbon dioxide (CO₂) emission source. Among them, the Naphtha Cracking Center (NCC), which produces ethylene, propylene, propane and mixed C4, consumes large amounts of energy and emits significant amounts of CO₂. For this reason, an integrated techno economic- environmental impact assessment aimed at reducing energy consumption and environmental impact factors is necessary to ensure efficiency in terms of economics and environment. This study aims to analyze the efficiency of the heat exchanger network used in the existing NCC base on the pinch analysis and select an improvement plan that can reduced energy consumption. In order to reduces the utility consumption in the process, an optimal heat exchanger network considering the high-temperature and low-temperature stream was derived, and the economic evaluation was conducted by considering the trade-off between the reduction in utility consumption and the increase in heat exchanger installation cost. In addition, an environmental impact assessment was conducted on the reduced CO₂ emission in consideration of the environmental aspect, and the economic environmental impact assessment used the payback period to recover the invested funds to come up with an energy saving plan that can be applied based on the actual process. As a result of considering the economic-environmental impact assessment, when the environmental impact assessment was not considered, it was 4.29 months, 3.21 months, and 3.39 months for each case, and when considering the environmental impact assessment, it was 4.24 months, 3.17 months, and 3.35 months for each case. These results appeared equally both when the environmental impact assessment was not include and when it was include. In addition, a sensitivity analysis was conducted for each case to determine how important factors affect the payback period. As a result of the sensitivity analysis, the cost of the heat exchanger was identified as a major factor influencing the overall cost.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.347-352
• /
• 1998

A study was carried out on the elelctrochemical characteristics of chemically modified electrodes (CMEs) by cyclic voltammetry. Fabrication of CMEs was made by coating with mixed valence (mv) inorganic-metal polymeric films on the glassy carbon electrode surface by potential cycling. Anodic oxidation behavior of methanol and L-ascorbic acid was studied by using CMEs working electrode. Deposition of films such as mv ruthenium oxo/ruthenium cyanide film (mv Ru-O/CN-Ru), mv ruthenium oxo/ferrocyanide film (mv Ru-O/$Fe(CN)_6$), and mv ruthenium oxo/ruthenium cyanide/Rhodium film (mv Ru-O/CN-Ru/Rh) was obtained to coat by scan rate of 50 mV/sec within the specified potential range (-0.5V ~ +1.2V). Film thickness was controlled by the repeat of the potential cycling. Anodic oxidation behavior of methanol was as follow. Calibration graph by using mv Ru-O/CN-Ru film showed linearly from 10 mM to 80 mM MeOH with slope factor of $-7.552{\mu}A/cm^2$. Although slope factor by using mv Ru-O/$Fe(CN)_6$ film was $-5.13{\mu}A/cm^2$, yet linear range of calibration graph could be extended from 10 mM to 100 mM MeOH. Anodic oxidation behavior of L-ascorbic acid was studied by mv Ru-O/CN-Ru film on the glassy carbon electrode and the glassy carbon electrode with Rh film, Glassy carbon electrode modified with Ru polymeric film was showed better sensitivity than the Rh-glassy carbon modified electrode (mv Ru-O/CN-Ru/Rh). Calibration graph was linear from 0.1 mM to 5 mM L-ascorbic acid by using glassy carbon electrode modified with Ru polymeric film. Solpe factor and relative coefficient are $-84.78{\mu}A/mM$ and 0.998, respectively.

• Korean Journal of Microbiology
• /
• v.45 no.3
• /
• pp.251-256
• /
• 2009

Leaf samples and bulbs showing characteristic symptoms of virus infection were collected from Gang-won, Chung-nam, and Jeju Province of Korea in 2008-2009. Three viruses, Lily symptomless virus (LSV), Lily mottle virus (LMoV), and Cucumber mosaic virus (CMV) were detected by RT-PCR. Virus-infected plant samples were identified; 12 plants with LSV, 20 plants with LMoV, and 1 plant with CMV. Of the twelve LSV infected samples, seven samples were found to be mix-infected with LMoV and LSV. Symptoms of LMoV and LSV mixed infection were fairly severe, like as vein clearing, leaf curling, leaf mottling, leaf mosaic, and yellow streaking. Mixed infection with LMoV and LSV was also found in lily bulbs which have been stored under unfavorable environmental conditions. LMoV predominated in our tests, whereas spread of Lilyvirus X (LVX) was not found. The nucleotide sequences of coat protein (CP) region of seven isolates (4 LMoV, 2 LSV, and 1 CMV) were compared with the corresponding regions of LMoV (AJ564636), LSV (AJ516059) and CMV(AJ296154). The nucleotide sequence homologies between reference viruses and seven isolates were 95-99%. Complete sequencing of seven isolates is necessary to obtain more information on the molecular characteristics of these viruses as well as to increase sensitivity and rapidity of viral detection.