• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.39-46
• /
• 2000

This study is to investigate the watertightness properties of waterproofing admixture mixed redispersible polymer and siliceous powder. Series I deals with change in micro-structure of mortar by waterproofing admixture according to the water/cement ratios of 0.5, 0.6, 0.7 and 0.8 Crystal growth in micro-structure was observed through SEM to estimate on the watertightness effect of it. SeriesII deals with watertightness properties of waterproofing admixture on water permeability coefficient, crack restoration capacity and carbonation depth. SeriesII deals with watertightness properties of waterproofing admixture on water permeability coefficient, crack restoration capacity and carbonation depth. The result of this study can be summarized as follows. 1) Fluidity of mortar and concrete was increased by adding waterproofing admixture. 2) From observation through SEM. Crystals grew larger and denser in micro-structure as fiberic crystalization. 3) Waterproofing admixture is good watertightness properties in a level of high water/cement ratios and long limit of time. 4) Crack restoration capacity was appeared and durability was progressed by waterproofing admixture.

• 대한화학회지
• /
• 제18권1호
• /
• pp.31-39
• /
• 1974

$Mn^{++}, Co^{++} 및 Zn^{++}$용액을 실온에서 양이온 교환수지와 2염기 유기산이 들어 있는 용액에 섞어 넣었다. 방사성 금속이온을 추적자로 사용함으로써 금속이온이 수지층과 용액사이에 어떻게 분배되는가를 조사하였다. 이 분배 비율이 유기산이온 농도에 따라 어떻게 달라지는가를 보아, $Mn^{++}, Co^{++} 및 Zn^{++}$이 수용액, 에탄올-물 및 아세톤-물에서 썩신산, 말론산, 프타르산 및 타르타르산과 사이에 1:1착물을 형성한다고 결론하였다. 또한 본 연구의 결과 이들 착물의 안정도가 다음순으로 증가함을 알았다.$Mn^{++}

• 펄프종이기술
• /
• 제35권1호
• /
• pp.19-26
• /
• 2003

In recent years, numerous studies have been carried out to find out the possible substitution of PE-coated paperboards used in packaging of watery or oily foods. Accordingly, this study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of mixed coating agents. At that time, two kinds of synthetic coating agents(AKD, PYA) and three kinds of natural coating agent(CMC, corn starch, oxidized starch) were used for making the mixed coating agents respectively. Physical properties of coated paperboards were tested. Conclusions obtained from this study were as follows. Based on concentrations, the proper mixture ratios were 10:90(AKD:CMC), 10:90(AKD:corn starch), 10:90(AKD:oxidized starch), 40:60(PVA:CMC), 20:80(PVA:corn starch) and 20:80(PYA:oxidized starch). The mixed coating agent of PYA:corn starch(20:80) was the most efficient coating agent. Consequently, water and oil resistance were improved even with much addition of natural coating agents. We consider that they can be suitable for the packaging used in the storage of higher moisture vegetables and other food, and also can be suitable for oily fried food.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.147-152
• /
• 2004

Aerobic cometabolism of cis-1,2-dichloroethylene (c-DCE) and c-DCE epoxide by a butane-grown mixed culture was evaluated. Transformation of c-DCE resulted in the concomitant generation of c-DCE epoxide. Chloride release studies showed nearly complete oxidative dechlorination of c-DCE (approximately 75%). Mass spectrometry confirmed tile presence of a compound with mass-to-charge-fragment ratios of 112, 83, 48, and 35. The values are in agreement with the spectra of a chemically synthesized c-DCE epoxide. Some evidences indicating the involvement of the monooxygenase in the transformation of c-DCE epoxide are: 1) $O_2$ requirement for c-DCE transformation and butane degradation; 2) butane inhibition on c-DCE transformation and vice versa; 3) the inactivation of c-DCE and c-DCE epoxide transformations by acetylene (a known monooxygenase inactivator); and 4) tire inhibition of c-DCE epoxide transformation by c-DCE.

• 한국분무공학회지
• /
• 제16권4호
• /
• pp.195-200
• /
• 2011

The pressure-swirl atomizer is widely used for the injectors in liquid rocket engines thanks to its high performance atomization and broad stability margin range. Spray mixed-interaction is an important area of study especially in cases where the propellant is mixed by spray interaction after an oxidant and a fuel are discharged separately. This interaction of sprays results in a significant modification of the spray characteristics such as the spatial evolution of the sprays. Experiments are conducted by a photographic technique to quantify the merged angle of the interaction regions of sprays from two pressure-swirl injectors. The experimental results show that the merged angle is mainly determined by the momentum flux ratios between two swirled sprays.

• 한국농공학회논문집
• /
• 제47권6호
• /
• pp.59-70
• /
• 2005

A series of resonant column test was performed to investigate the dynamic deformation characteristics of silty sand soils mixed with polypropylene fibrillated type fiber. Results show that optimum mixing ratios were $0.2\%$ for 19mm of cut fiber for shear modulus and $0.1\%$ for 60mm cut fiber fur damping ratio. As shear strain was increased, normalized values of shear modulus (G(Reinforced)/ G(Unreinforced)) of fiber reinforced soil were increased up to $10^{-3}\%\~10^{-1}\%$ ranges. However, normalized damping ratio (D(Reinforced/D(Unreinforced)) was diminished with an increase in strain beyond $10^{-3}\%\~10^{-1}\%$ for the damping capacity of soils mixed with fiber. Normalized shear modulus $(G/G_{max})$ obtained from the test was plotted in the chart suggested by Seed and Idriss. The shear modulus of silty sand was located between sand and gravel curves.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1175-1180
• /
• 2008

This study explored the compacition characteristics of organic weathered soils. Weathered soils were collected around the Gwangju University in Jinwol-dong, Gwangju city, and coal was used as organic material. Weathered soils were mixed with coal so that the ratio of organic elements against mixed soil can be 0%, 25%, 50%, and 75% respectively. Compaction tests were carried out on these organic mixture soils in different ratios of organic materials. And soap water instead of water in compaction tests was used. Through this study, We knew that the bigger the organic material ratio was, the more the optimum moisture content increased and the less the maximum dry unit weight reduced. In case of using small compaction energy, using soap water instead of water improved the compaction efficiency a little.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.509-512
• /
• 2004

This research is targeting that estimate the effect on cement concrete pavement with type of chloride deicers. In order to this study objective, when chloride deicers were spread on road surface, thermal characteristics test was conducted. Also, skid resistance test according to types and concentration of chloride deicier, road surface conditions were investigated. As a test results, thermal characteristics with kind of chloride deicier could know that sodium chloride(NaCl) is exothermic reactive material, calcium chloride$(CaCl_2)$ is endothermic reactive material. And, in case of mixed salt of the calcium and sodium chloride, it could know that can change to the exothermic or endothermic reaction according to dosage ratios. Skid value by British Pendulum Tester(BPT) has shown that it is seldom difference between the types($CaCl_2$, NaCl, mixed salt) and solution concentrations(0.5, 0.8, 1.0, 4.0, $10\%$) of chloride deicier comparing with tap water except mixed salt($10\%$ solution concentration).

• Bulletin of the Korean Chemical Society
• /
• 제7권2호
• /
• pp.113-116
• /
• 1986

Spectral behaviors of cationic dyes, methylene blue(MB) and acridine orange(AO), with varying concentrations of sodium dodecylsulfate(SDS) were studied. At low concentration of SDS(<1mM), these dyes formed insoluble dye-surfactant aggregates. When [SDS] is 4-5 mM, the aggregates were dissolved into mixed micelles of constant composition. At higher concentration of [SDS], the composition of mixed micelles were changed with [SDS], resulting only monomeric form of dyes in micelles. AO-SDS system showed greater aggregating and less dissolving properties, and weaker effect of salt than MB-SDS system did. These were attributed to the greater hydrophobic nature of the former dye. The monomer/dimer ratios of dyes in mixed micelles at given [SDS] were greatest at $20^{\circ}C$, reflecting the dependency of CMC of the surfactant on temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.95.3-95
• /
• 2001

This paper investigates the simultaneous use of mixed H2/H_inf and mu-synthesis design methodology to design a robust controller for flexible link. We adopt four steps to design control system as follows: Step 1 : Generally, there are differences between the nominal and real model, so we consider the plant as a combination of parametric model uncertainty and unstructured uncertainty represents real structural uncertainties associated with the damping ratios of the flexible modes retained in the nominal model without payload. denotes the uncertainty which is due to the payload added at the tip. Step 2 : We adopt the mixed H2/H_inf theory to design a feedback controller K(s) by using the model uncertainty ...