• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.463-470
• /
• 2014

A Verilog model is proposed for transmission lines to perform the all-Verilog simulation of high-speed chip-to-chip interface system, which reduces the simulation time by around 770 times compared to the mixed-mode simulation. The single-pulse response of transmission line in SPICE model is converted into that in Verilog model by converting the full-scale analog signal into an 11-bit digital code after uniform time sampling. The receiver waveform of transmission line is calculated by adding or subtracting the single-pulse response in Verilog model depending on the transmitting digital code values with appropriate time delay. The application of this work to a USB 2.0 high-speed PHY interface reduces the simulation time to less than three minutes with error less than 5% while the mixed-mode simulation takes more than two days for the same circuit.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.737-740
• /
• 2009

SiC power device possesses attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation. In general, device design has a significant effect on the switching characteristics, In this paper, we demonstrated that the switching performance of DMOSFETs are dependent on the with Channel length ($L_{channel}$) and Current Spreading Layer thickness ($T_{CSL}$) by using 2-D Mixed-mode simulations. The 4H-SiC DMOSFETs with a JFET region designed to block 800 V were optimized for minimum loss by adjusting the parameters of the JFET region, CSL, and epilayer. It is found that improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the gate-source capacitance and channel resistance. Therefore, accurate modeling of the operating conditions are essential for the optimizatin of superior switching performance.

• 폴리머
• /
• 제26권6호
• /
• pp.752-758
• /
• 2002

사슬길이가 서로 다른 두 종류의 n-paraffin 혼합물이 결정을 형성할 때 사슬의 움직임과 형성된 라멜라의 구조를 조사하기 위하여 FTIR, FT-Raman, XRD 실험방법을 이용하였다. FTIR crystal field splitting, Raman longitudinal acoustic mode, 그리고 SAXS long period 측정 결과들을 비교하여 사슬길이가 다른 두 n-paraffin 사슬이 혼합되어 하나의 라멜라를 형성하거나 분리되어 각각의 라멜라를 형성하는 과정을 연구하였다.

• 대한치과기공학회지
• /
• 제37권4호
• /
• pp.243-250
• /
• 2015

Purpose: The aim of this study was to investigate the shear bond strength between various commercial zirconia coping and veneering ceramic, and to observe the failure mode. Methods: For each zirconia block (iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent), 10 rectangular specimens were layered with Cercon ceram kiss, IPS e.max ceram, ICE Zirkon ceramic according to recommended by the manufacturer. The shear bond strength tests of the veneering porcelain to zirconia were carried out until fracture by a universal testing machine. After the shear bond tests, failure modes were characterized visually, under a stereomicroscope, such as adhesive, cohesive, or mixed. Data were analyzed with One-way ANOVA followed by Scheffe's tests. Results: The shear bond strength ($mean{\pm}SD$) of zirconia-veneer ceramic were JC group $13.9{\pm}3.6MPa$; JE group $17.7{\pm}2.4MPa$; JI group $15.1{\pm}2.5MPa$; LC group $9.5{\pm}1.5MPa$; LE group $16.2{\pm}2.3MPa$; LI group $12.6{\pm}0.8MPa$; ZC group $16.0{\pm}2.3MPa$; ZE group $18.5{\pm}3.4MPa$; and ZI group $15.3{\pm}3.2MPa$. The One-way ANOVA showed a significant difference between groups (p<0.05). The failure mode in most experimental groups was mixed failure, except for the LC group, which showed adhesive failure, and JE group, LE group and ZE group showed cohesive failure. Conclusion: For IPS e.max ceram, the shear bond strength value was highest for all kinds of zirconia blocks. For ICE Zirkon transluzent, the shear bond strength value was highest for all kinds of veneering ceramics. Most of experimental group interfaces revealed mixed failure mode.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.319-332
• /
• 2014

삽입 손실은 EMI 필터의 노이즈 제거 성능을 나타내는 주된 지표로 쓰인다. 본 논문에서는 기존의 방법보다 좀 더 정확하고 편하게 삽입 손실을 측정할 수 있는 방법에 대하여 연구하였다. 이와 관련하여 EMI 필터의 비이상적인 특성들을 모두 고려하기 위해 4포트 S-파라메터 측정을 통한 임의의 전원/부하 임피던스에 대한 차동 모드와 공통 모드의 삽입 손실을 구하는 방법에 대하여 제시하였다. 이를 활용하여 EMI 필터가 사용될 회로의 전원/부하 임피던스를 알고 있을 때, 시스템에 적용된 EMI 필터의 차동 모드 삽입 손실과 공통 모드 삽입 손실를 구할 수 있다. 또한, 이를 바탕으로 적절한 소자 값을 선택하기 위해 혼합 모드 변환, 체인 혼합 모드 변환 그리고 4포트 모델링을 통하여 임의의 소자 값에 따른 전체 시스템의 삽입 손실을 예측하는 방법에 대하여 제시하였다.

• 전산구조공학
• /
• 제9권2호
• /
• pp.133-142
• /
• 1996

본 논문에서는 혼합모우드형의 공학적 파괴역학을 위한 두가지 방법의 p-version유한요소모델을 사용한 응력확대계수 산정을 목적으로 연구되었다. 두 가지 방법은 COD와 CSD방법에 의한 변위외삽법과 분해법에 기초한 J-적분법이다. 즉, p-version 유한요소해석을 통해 얻어지는 변위장을 균열선에 대해 대칭 및 역대칭 변위로 분리함으로써, 앞에서 언급된 두가지 방법에 의해 모우드-I과 모우드-II 응력확대계수를 결정할 수 있다. 제안된 방법들의 검증을 위한 예제는 인장력을 받는 중앙균열판과 중앙 경사균열판 문제이다. 균열판의 경사각의 변화와 균열길이와 평판 폭의 비에 따른 수치해석결과는 기존 문헌에 있는 이론값과 경험식에 의한 결과와 비교되어 높은 정도를 보여주고 있다 .

• Nonlinear Functional Analysis and Applications
• /
• 제26권5호
• /
• pp.935-947
• /
• 2021

An efficient adaptive scheme based on a triple mixed quadrature rule of precision nine for approximate evaluation of line integral of analytic functions has been constructed. At first, a mixed quadrature rule SM₁(f) has been formed using Gauss-Legendre three point transformed rule and five point Booles transformed rule. A suitable linear combination of the resulting rule and Clenshaw-Curtis seven point rule gives a new mixed quadrature rule SM₁₀(f). This mixed rule is termed as triple mixed quadrature rule. An adaptive quadrature scheme is designed. Some test integrals having analytic function integrands have been evaluated using the triple mixed rule and its constituent rules in non-adaptive mode. The same set of test integrals have been evaluated using those rules as base rules in the adaptive scheme. The triple mixed rule based adaptive scheme is found to be the most effective.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.103-116
• /
• 1990

The mixed mode surface crack in finite-width plate subjected to uniform shearing has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles (${\alpha}$) of $0^{\circ}, 15^{\circ}, 30^{\circ}, 45^{\circ}, 60^{\circ}, and 75^{\circ}, $ and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this in this study. Comparison of the results from both method showed good agreement.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.117-129
• /
• 1990

The mixed mode surface crack in finite-width plate subjected to uniform shearing has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles (${\alpha}$) of $0^{\circ}, 15^{\circ}, 30^{\circ}, 45^{\circ}, 60^{\circ}, and 75^{\circ}, $ and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this in this study. Comparison of the results from both method showed good agreement.

• 한국분무공학회지
• /
• 제27권1호
• /
• pp.36-41
• /
• 2022

In this study, the combustion instability characteristics according to the change in the hydrogen ratio in the fuel in the single nozzle system of the hydrogen-natural gas mixed gas turbine for power generation was analyzed using a three-dimensional finite element analysis-based Helmholtz solver. This combustor shows the instability characteristics in which mode transition occurs from a mode having a low amplitude near 70 Hz to a mode having a high amplitude of 250 Hz or higher as the hydrogen fraction in the fuel increases. The current modeling results are found to reasonably predict the main characteristics of the change in measured instability frequency and growth rate with the change in fuel composition.