• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.145-149
• /
• 2015

LiCl 용융염에서 희토류 금속을 포함한 $Nd_2O_3-La_2O_3-NiO$ 복합산화물의 전해환원을 통한 $La_{0.5}Nd_{0.5}Ni_5$ 합금제조에 대한 연구를 수행하였다. $Nd_2O_3-La_2O_3-NiO$ 복합산화물은 $1100^{\circ}C$에서 소결시에 $NiNd_2O_4$ (스피넬)과 $LaNiO_3$ (페로브스카이트) 구조가 생성되었다. 스피넬 및 페로브스카이트 구조는 복합산화물의 전해환원 반응속도를 증가시켰다. LiCl 용융염에서 전해환원 반응 동안 $Nd_2O_3-La_2O_3-NiO$ 복합산화물은 Ni, $NiLa_2O_4$ 등의 다양한 중간생성물을 거쳐 $La_{0.5}Nd_{0.5}Ni_5$ 합금으로 환원됨을 확인할 수 있었다. XRD 분석결과를 통해 최종 생성물인 $La_{0.5}Nd_{0.5}Ni_5$의 생성 메카니즘을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.339-343
• /
• 2010

A series of $Ce_1Mg_xZr_{1-x}O_2$ (CMZO) mixed metal oxide with different molar ratio were prepared by simple co-precipitation method. The prepared materials were tested for their catalytic activity performance using Knoevenagel condensation of various aromatic aldehydes with barbituric acid under solvent-free condition in microwave. The best catalytic activity was obtained with CMZO (1:0.6:0.4). The synthesized materials were characterized by using XRD, FT-IR, SEM-EDS techniques.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권3호
• /
• pp.260-265
• /
• 2013

Impressed current cathodic protection (ICCP) system is one of the most promising corrosion protection methods. The Effect of ICCP system can be changed at diverse conditions. Particularly, temperature and relative humidity plays a crucial role in CP (Cathodic Protection) effect. Thus, in this study, the influence of temperature and relative humidity on concrete specimens was investigated. Specimens were concrete slab type with a base of $400mm{\times}400mm$ and height of 70mm. To enhance the effect of CP system, seawater was used as an electrolyte. Used anode for ICCP system was mixed metal oxide (MMO) titanium. Test factors were natural potential, CP potential, CP current, and 4-hour depolarization potential. From this study, it could be confirm that CP potential and current were highly influenced by temperature and relative humidity.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.662-666
• /
• 2008

Electrochemical properties of carbon cryogel electrode for the application of composite electrode materials mixed with metal oxide in supercapacitor have been studied. Carbon cryogels were synthesized by sol-gel polycondensation of resorcinol with form aldehyde, followed by a freeze drying, and then pyrolysis in an inert atmosphere. Physical properties of carbon cryogel were characterized by BET, X-ray diffraction (XRD) and scanning electron microscopy (SEM). It is found that carbon cryogel is amorphous material. The electrochemical properties of carbon cryogel were measured by cyclic voltammetry as a function of concentration of liquid electrolyte, galvanostatic charge-discharge with different scan rates and electrochemical impedance measurements. The result of cyclic voltammetry indicated that the specific capacitance value of a carbon cryogel electrode was approximately 150.2 F/g (at 5 mV/s in 6M KOH electrolyte).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1459-1461
• /
• 2009

In this study, we prepared the multi-refraction film thin by ink-jet technique with sol-gel precursor. The precursors were prepared by using some transition metal alk-oxide and the tetraethylorthosilicate (TEOS) mixed separately with n-Butyl Alcohol and PVB (Poly(vinyl butyral)).The structure and morphology of the resulting films were investigated by atomic force microscope (AFM). It is shown that the shape of the pattern of the films would affect the refraction proportion.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.108-111
• /
• 2006

The oxidizer-induced corrosion state and microstructure of surface passive metal-oxide layer greatly influenced on the removal rate of tungsten film according to the slurry chemical composition of different mixed oxidizers. In this paper, the actual polishing mechanism and pH-potential equilibrium diagram obtained from potentiodynamic polarization curve were electrochemically compared. An electrochemical corrosion effect implies that slurries with the highest removal rate (RR) have the high dissolution rate.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.359-366
• /
• 2013

This work is investigated for the catalytic decomposition of hydrogen iodide (HI). Platinum was used as active material by loading on $ZrO_2-SiO_2$ mixed oxide in HI decomposition reaction. To obtain high and stable conversion of hydrogen iodide in severe condition, it was required to improve catalytic activity. For this reason, a method increasing dispersion of platinum was proposed in this study. In order to get high dispersion of platinum, zirconia was incorporated in silica by sol-gel synthesis. Incorporating zirconia influence increasing platinum dispersion and BET surface area as well as decreasing deactivation of catalysts. It should be able to stably product hydrogen for a long time because of inhibitive deactivation. HI decomposition reaction was carried out under the condition of $450^{\circ}C$ and 1 atm in a fixed bed reactor. Catalysts analysis methods such as $N_2$ adsorption/desorption analysis, X-ray diffraction, X-ray fluorescence, ICP-AES and CO gas chemisorption were used to measurement of their physico-chemical properties.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.96-104
• /
• 2009

혼합금속산화물에 담지된 Pd-Rh 허니컴 촉매 상에서 NO와 $N_2O$를 동시에 저감하기 위한 반응 온도를 낮추면서 각각의 반응물에 대한 전환율을 높이기 위하여, 환원제로 수소 또는 일산화탄소 사용에 대해 조사하였다. 각각의 환원제 사용 시, NO와 $N_2O$의 전환율에 대한 반응 조건의 영향을 조사하기 위해 반응온도, 각 환원제와 산소의 농도, NO와 $N_2O$ 간의 농도 비율 등을 변화시켰다. 먼저 수소를 환원제로 사용하는 경우, 산소의 부재시 $200^{\circ}C$ 미만의 저온에서 50% 이상의 NO와 $N_2O$ 전환율을 얻을 수 있었다. 한편, 일산화탄소를 환원제로 사용하는 경우에는 NO와 $N_2O$ 전환율이 각각 $200^{\circ}C$와 $300^{\circ}C$ 이상에서 증가하기 시작하였다. 그러나, 두 가지 환원제 모두의 경우에서, 반응 가스내에 산소 농도가 증가함에 따라 $N_2O$와 NO 전환율에 감소하였다. 결과적으로 일산화탄소 환원제에 비해, 수소 환원제가 상대적으로 저온에서 NO와 $N_2O$를 동시에 저감할 수 있으며, 산소 농도에 의한 영향을 덜 받는 것으로 나타났다. 반면, 반응물내 $N_2O$와 NO 농도비에 의한 NO와 $N_2O$ 전환율의 영향은 환원제의 종류에 크게 영향을 받지 않는 것으로 관찰되었다. 저온에서 NO와 $N_2O$를 동시에 저감시키기 위해서는 산소 분위기보다는 수소 분위기에서 촉매를 전처리하는 것이 보다 효과적인 것으로 나타났다.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.384-391
• /
• 2020

Due to its characteristics of light weight, high energy density, good safety, long service life, no memory effect, and environmental friendliness, lithium-ion batteries (LIBs) are widely used in various portable electronic products. The capacity and performance of LIBs largely depend on the performance of electrode materials. Therefore, the development of better positive and negative materials is the focus of current research. The application of metal organic framework materials (MOFs) derivatives in energy storage has attracted much attention and research. Using MOFs as precursors, porous metal oxides and porous carbon materials with controllable structure can be obtained. In this paper, rod-shaped Co-MOF-74 was grown on Ni Foam (NF) by hydrothermal method, and then Co-MOF-74/NF precursor was heat-treated to obtain rodshaped Co₃O₄/NF. Ni Foam was skeleton structured, which effectively relieved. The change of internal stress changes and destroys the structural volume of the electrode material and reduces the capacity attenuation. Co₃O₄/NF composite material has a specific discharge capacity of up to 1858 mA h/g for the first time, and a reversible capacity of up to 902.4 mA h/g at a current density of 200 mA/g, and has excellent rate and impedance performance. The synthesis strategy reported in this article opens the way to design high-performance electrodes for energy storage and electrochemical catalysis.

• 한국재료학회지
• /
• 제13권8호
• /
• pp.519-523
• /
• 2003

We report the synthesis of cubic spinel $ZnCo_2$$O_4$thin films and the tunability of the conduction type by control of the oxygen partial pressure ratio. Zinc cobalt oxide films were grown on$ SiO_2$(200 nm)/Si substrates by reactive magnetron sputtering method using Zn and Co metal targets in a mixed Ar/$O_2$atmosphere. We found from X-ray diffraction measurements that the crystal structure of the zinc cobalt oxide films grown under an oxygen-rich condition (the $O_2$/Ar partial pressure ratio of 9/1) changes from wurtzite-type $Zn_{1-x}$ $Co_{X}$O to spinel-type $ZnCo_2$$O_4$with the increase of the Co/Zn sputtering ratio,$ D_{co}$ $D_{zn}$ . We noted that the above structural change accompanied by the variation of the majority electrical conduction type from n-type (electrons) to p-type (holes). For a fixed $D_{co}$ $D_{zn}$ / of 2.0 yielding homogeneous spinel-type $_2$O$ZnCo_4$films, the type of the majority carriers also varied, depending on the$ O_2$/Ar partial pressure ratio: p-type for an $O_2$-rich and n-type for an Ar-rich atmosphere. The maximum electron and hole concentrations for the Zn $Co_2$ $O_4$films were found to be 1.37${\times}$10$^{20}$ c $m^{-3}$ and 2.41${\times}$10$^{20}$ c $m^{-3}$ , respectively, with a mobility of about 0.2 $\textrm{cm}^2$/Vs and a high conductivity of about 1.8 Ω/$cm^{-1}$ /.