• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.230-233
• /
• 2008

The vanadium rich ash of petroleum coke can give a slagging problem during because of the high melting point of $V_2O_3$. For continuous removal of the slag, petroleum coke is often mixed with coal, and the viscosity of the mixed slag is an important property, determining the gasification temperature. The viscosities of the mixed slag from various mixing ratios of petroleum coke and a bituminous coal were investigated. When mixed with a crystalline coal slag, $T_{cv}$ was increased at a higher the coke content in the mixed feed. When the $V_2O_3$ concentration was greater than 4.5%, it was difficult to get accurate measurements of $T_{cv}$. The SEM/EDX analyses of the cooled slag revealed that the major crystalline phase was anorthite, and $T_{cv}$ should be related to the formation temperature of anorthite. The SEM/EDX analyses also showed that, at low concentrations of vanadium, part vanadium formed a crystalline phase with Al-Si-Ca-Fe, and the rest remained in the glassy phase, suggesting that vanadium existed as a slag component at the low viscosity region. At a high concentration, vanadium forms a phase with Ca, and the Ca-V phase was separated from the slag phase, and formed a layer above the slag. FeO in petroleum coke also played an important role determining viscosity: at high temperatures, increased FeO lowered the viscosity, but as it formed a spinel phase, the depletion of FeO in the slag resulted in a higher viscosity.

• 한국환경과학회지
• /
• 제7권3호
• /
• pp.335-348
• /
• 1998

The intensive meteorological observations including pibal balloon at Ungcheon, airsonde and 10m meteorological tower observations at Gulup-Do, where are located In the western coastal region, are taken to Investigate the characteristics of the upper and lower atmospheric structure and the local circulation pattern during the period of 17 to 22 September 1996. The diurnal variations of weather elements(i.e. air temperature, humidity, pressure, and Und speeds at Gulup-Do are analyzed and discussed with those at four inland meteorological stations. The vertical profiles of wind vector, ortho- gonality(Ω), and shear obtained from the pibal obsenrations are also presented to examine the change of wand structure according to the synoptic-scale pressure system's movement. The diurnal temperature changes at Gulup-Do are more sensitive than that of Inland meteorological stations In case of the mow of southwesterlies but are not dominant due to the ocean effect under the Influence of relatively cold northerlies. A well defined mixed layer Is developed from the 500m to the maximum 1700m with a significant capping Inversion layer on the top of it. It can be found from the vertical profiles of wind vector that the wind become generally strong at the interface heights between cloud lay- ers and non-cloud layers. The maximum Und shear Is appeared at the bel각t where the varlauon of wand direction Induced by the passage of synoptic-scale pressure system Is accompanied with the In- crease of Und speed. Based on the wind orthogonality, the change of wind direction with height is more complicated In cloudy day than In clear day. In case of a fair weather, the change of wand direction is showed to be at around 2km.

• Restorative Dentistry and Endodontics
• /
• 제28권6호
• /
• pp.498-503
• /
• 2003

The purpose of this study was to evaluate the rewetting effect of water-based primer on the air-dried dentin. In this in vitro study, freshly extracted non-caries human molars and three-step adhesive system(SBMP) were used. Freshly extracted non-caries human molars and three-step adhesive system(SBMP) were used. Flat occlusal dentin surface were prepared using low-speed diamond saw, Prepared teeth were randomly divided into three groups. Group 1.(W): etched(35% phosphoric acid for 15s) and blot-dried, Group 2.(5D): 5s air-dried, Group 3.(30D): 30s ail-dried, To obtain color contrast in CLSM observation, primer was mixed with rhodamine B and bonding resin was mixed with fluorescein. Microscopic sample of each group were obtained after longitudinal section. Morphological investigation of resin-dentin interface and thickness of hybrid layer measurement using CLSM were done. Microtensile bond strength for each specimen was measured. Specimen were observed under microscope to examine the failure patterns of interface between resin and dentin. The results of this study were as follows: 1. The results(mean) of Thickness of hybrid layer were W:19.67, 5D:20.9, 30D:10$\mu\textrm{m}$. Only 30D had statistically significant differences to Wand 5D(P<0.05). 2. The results(mean) of Microtensile bond strength were W:16.02, 5D:14.69, 30D:11.14MPa. Only 30D had statistically significant differences to Wand 5D(P<0.05). 3. There were positive correlation between Thickness of hybrid layer and microtensile bond strength(P<0.05).

• 한국환경생태학회지
• /
• 제22권5호
• /
• pp.471-480
• /
• 2008

본 연구는 지리산국립공원의 해발고도와 식생에 따른 번식기 조류군집특성을 파악하기 위해 실시하였다. 조사를 위하여 고도와 식생에 따라 4개 조사구를 선정하고 2006년 3월부터 8월까지 번식기 조류군집과 서식지환경조사를 실시하였으며 그 결과는 다음과 같다. 전체 조사지에서 관찰된 조류 종수는 총 32종으로 각 조사구별 관찰 종수 및 밀도는 고도가 낮은 혼효림 조사구에서 27종, 37.31마리/ha, 고도가 낮은 활엽수림 조사구에서 23종, 34.99마리/ha, 고도가 높은 혼효림 조사구에서 18종, 23.95마리/ha, 고도가 높은 활엽수림 조사구에서 19종, 20.21마리/ha이었다. 고도가 낮은 지역에서만 관찰된 종은 11종(멧비둘기, 검은등뻐꾸기, 직박구리, 호랑지빠귀, 붉은머리오목눈이, 숲새, 산솔새, 쇠솔딱새, 큰유리새, 박새, 동박새)이었으며, 고도가 높은 지역에서만 관찰된 종은 4종(들꿩, 매사촌, 두견이, 흰배멧새)이었다. 조류 종수와 밀도는 고도가 낮은 지역과 혼효림에서 높게 나타났다. 영소길드는 고도가 낮은 지역은 3가지 유형의 종수가 비슷하게 나타났으며, 고도가 높은 지역은 수관층 영소길드의 종수가 적게 나타났다. 채이길드는 모든 조사구에서 수관층 채이길드의 종이 가장 높게 나타났다. 종별 밀도의 조사구별 차이분석에서 식생에 따른 밀도의 유의적 차를 나타낸 종은 고도가 낮은 지역에서 4종으로 그 중 오목눈이와 박새는 수관층의 피도량의 차이, 진박새는 침엽수서식지 선택 특성에 따른 것이었다. 고도가 높은 지역에서 5종은 관목층 수목의 밀생에 따른 것으로 조사되었다. 고도에 따른 밀도의 유의적 차를 나타내는 종은 10종으로 벙어리뻐꾸기, 굴뚝새, 쇠유리새, 쇠솔새, 진박새, 노랑턱멧새는 고도가 높은 지역에서, 흰배지빠귀, 오목눈이, 곤줄박이, 동고비는 고도가 낮은 지역에서 밀도가 높게 나타났다. 지리산 번식조류군집 분포는 관목층의 밀생과 수관층의 총피도량 차이에 영향을 받는 것으로 보여진다. 그러므로 관목층의 피도량과 수관층의 엽층다양성 및 총피도량 관리 및 유지가 필요할 것으로 판단된다.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.30-37
• /
• 1989

Silane($SiH_4$), methane($CH_4$), diborane(B_2H_6)그리고 phosphine($PH_3$)을 이용하여 rf글로방전분해법으로 PIN형 a-SiC:H/a-Si:H 이종접합 태양전지를 제작하였다. $SnO_2/ITO$층 형성치 태양전지의 효율은 ITO 투명전극만의 경우보다 1.5% 향상되었다. 제작조건은 P층의 경우 $CH_4/SiH_4$의 비를 5로 하고 두께는 $100{\AA}$이었다. I층은 P층위에 증착하였으나 진성이 아니고 N형에 가깝다. 이 I층을 진성으로 바꾸기 위해서 0.3ppm의 $B_2H_6$를 $SiH_4$에 혼합하여 5000${\AA}$증착했다. 또한 N층은 $PH_4/SiH_4$의 비를 $10^{-2}$로 하여 $400{\AA}$ 증착시켰다. 그 결과 입사강도가 15mW/$cm^2$일 때 개방전압 $V_{oc}=O'$단락전류밀도 $J_{sc=14.6mA/cm^2}$, 충진율 FF=58.2%, 그리고 효율 ${eta}=8.0%$를 나타내었다. 빛의 반사에 의한 손실을 감소시키기 위하여 $MgF_2$를 유리기판위에 도포하였다. 이에 의한 효율은 0.5% 향상되어 전체적인 효율은 8.5%였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.441-443
• /
• 2008

A non-vacuum process for fabrication of $CuInSe_2$ (CIS) absorber layer from the corresponding Cu, In solution precursors was described. Cu, In solution precursors was prepared by a room temperature colloidal route by reacting the starting materials $Cu(NO_3)_2$, $InCl_3$ and methanol. The Cu, In solution precursors were mixed with ethylcellulose as organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of Cu, In solution with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents and to burn the organic binder material. Subsequently, the resultant CI/Mo/glass sample was selenized in Se evaporation in order to get a solar cell applicable dense CIS absorber layer. The CIS absorber layer selenized at $530^{\circ}C$ substrate temperature for 30 min with various Se gas evaporation temperature was characterized by XRD, SEM, EDS.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.80-83
• /
• 2011

We have fabricated phosphorescent white organic light-emitting devices (WOLEDs) with a spin-coated poly(Nvinylcarbazole) [PVK] host layer. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic), tris(2-phenylpyridine)iridium(III) [$Ir(ppy)_3$], and tris(2-phenyl-1-quinoline)iridium(III) [$Ir(phq)_3$], were used as the blue, green, and red guest materials, respectively. The PVK was mixed with FIrpic, $Ir(ppy)_3$, and $Ir(phq)_3$ molecules in a chlorobenzene solution and spin-coated in order to prepare the emission layer; 3-(4-biphenylyl)-4-phenyl-5-(4-tertbutylphenyl)-1,2,4-triazole (TAZ) was used as an electron transport material. The resultant device structure was ITO/PVK:FIrpic:$Ir(ppy)_3:Ir(phq)_3$/TAZ/LiF/Al. The electroluminescence, efficiency, and electrical conduction characteristics of the WOLEDs based on the doped PVK host layer were investigated. The maximum current efficiency of the three wavelength WOLED with the doped PVK host was 19.2 cd/A.

• 대한원격탐사학회지
• /
• 제33권4호
• /
• pp.351-358
• /
• 2017

A new method to decompose the footprints of marine atmosphere boundary layer (MABL) on Synthetic Aperture Radar (SAR) imagery into characteristic spatial scales is proposed. Using two-dimensional Empirical Mode Decomposition (EMD) we obtain three Intrinsic Mode Functions (IMFs), which mainly present longitudinal rolls, three-dimensional cells and atmospheric gravity waves (AGW). The rolls and cells have spatial scales between 3.0 km and 3.8 km and between 5.3 km and 7.1 km, respectively. Based on previous observations and mixed-layer similarity theory, we estimated MABL's depths that vary from 0.95 km to 1.2 km over the rolls and from 3.0 km to 3.8 km over the cells. The AGW has maximum spectrum at 14.3 km wavelength. The method developed in this work can be used to decompose other satellite imageries into individual features through characteristic spatial scales.

• 한국해양학회지
• /
• 제20권1호
• /
• pp.12-21
• /
• 1985

하계 동지나해에서 가장 중요한 해양학적 현상들을 재검토하였다. 계절적 수 온약층 상부 표층수는 태양가열과 주로 양자강으로 부터의 담수의 유입 그리고 하 계 계절풍에 의해 지대한 영향을 받고 있다. 수온약층 하부층에는 여러가지 해양역 학적 작용에 대한 질량장의 조정에 의해서 몇가지 분명히 구별되는 수괴들 즉 쿠로 시오 표층수, 서북태평양 중앙수, 황해저층 냉수등이 잠입되고 있다. 잠입된 황해저 층 냉수와 서북태평양 중앙수와의 전선역 혼합이 제주 남방 대륙붕상의 저층에서 일어난다. 이 혼합수는 제주 주변과 한국 남해안 중저층의 해수 특성에 커다란 영 향을 미칠 것으로 보인다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1548-1553
• /
• 2000

An experiment was conducted to study the nutritional quality of whole crop corn silage ensiled with cage layer manure in sheep. Treatments were designed as a $3{\times}3$ Latin square with 16-day periods. Sheep were allotted in one of three diet-treatments, which were whole crop corn silage (CS), whole crop corn+30% cage layer manure (CLM) silage (based on DM; MS) and rice straw+concentrate (SC) mixed at 8:2 ratio (on DM basis). Silage ensiled with CLM significantly increased (p<0.05) digestibilities of crude protein, NDF and ADF, TDN over the other treatments. Ruminal pH in sheep fed SC was significantly (p<0.05) higher than that of the other diets at 0.5, 1, 2, 4 and 8 h after feeding. Ruminal ammonia nitrogen concentration of the MS treatment was significantly (p<0.05) higher than that of the other treatments at 0, 1, 2 h after feeding. The MS treatment highly increased (p<0.05) feed intake, digestibility of organic matter and crude protein, nitrogen intake and retained nitrogen. The MS treatment highly increased (p<0.05) purine derivative (PD) excretion leading to higher microbial protein synthesis.