• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.49-52
• /
• 1998

In this paper, to implement the electrical equivalent modeling of powder electroluminescent device, capacitate equation of device was chosen. The conventional structure device which have dielectric and phosphor layer between electrodes, and the single emission structure device which means that dielectric and phosphor were mixed between electrodes, were investigated. As a result, it was possible to make the equation that is transferred capacitance to phosphor layer, and using measured brightness efficiency and conductivity of devices was calculated.

• Journal of Plant Biology
• /
• 제14권1호
• /
• pp.1-4
• /
• 1971

To determine the amylase fromation mechanism and the effect of GA. in germinating barley seeds, they were divided into embryo-less seed, isolated embryo, aleurone layer and pure endosperm etc., treated with GA, and cultured separately or in mixed lots. The result obtained are as follows. 1) The amylase of barley seed is formed in the aleurone layer under the effect of inducing materials excreted from the embryo. 2) The embryonic materials amylase formation could be substituted for by GA. Therefore it can be presumed that the substance produced by the embryo which induces amylase synthesis is probably GA or material similar to it.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2007

The compound, Ti3(Al,Si)C2, was synthesized by hot pressing a powder mixture of TiCX, Al and Si. Its oxidation at 900 and 1000 oC in air for up to 50 h resulted in the formation of rutile-TiO2, -Al2O3 and amorphous SiO2. During oxidation, Ti diffused outwards to form the outer TiO2 layer, and oxygen was transported inwards to form the inner mixed layer.

• 보존과학회지
• /
• 제31권1호
• /
• pp.1-11
• /
• 2015

보물 제1312호 무위사 아미타여래삼존좌상은 기존에 목조불로 알려졌으나 2009년에 실시한 정밀안전진단을 통해 본존불인 아미타여래좌상은 흙으로 조성된 소조불로 밝혀졌다. 그런데 아미타여래좌상의 소조층은 손상이 심각하여 보수가 불가피하였고, 이에 보수재료로서 보다 안전하고 적합한 충전제에 대한 연구를 진행하였다. 본 연구는 무위사 아미타여래좌상의 소조층 보수에 가장 적합한 충전제를 제작하기 위한 실험으로 다양한 비율로 배합한 조합토 샘플을 제작한 후 건조 시 표면의 경화상태, 균열 및 색상변화, 수축률 결과를 측정하였다. 충전제 제작에 사용된 조합토 재료는 황토와 세사, 면 솜을 적용하였으며 6가지의 배합비율로 조합토 시료를 만들고 여기에 찹쌀풀, 도박풀, 아교로 만든 12가지 농도의 접착제를 혼합하여 총72가지 조건의 시료를 제작하여 비교분석 하였다. 실험결과 조합토는 황토와 세사의 질량비에 대하여 2.5%의 면 솜을 함유하고, 황토와 세사의 비율이 15:1일 때 수축률이 가장 낮은 것으로 판명되었으며, 천연접착제 중 색상의 변화가 적고, 물성변화량과 수축률이 가장 낮은 아교가 사용 가능한 접착제로 판단되었다. 즉, 조합토(황토:세사=15:1)와 아교15ml 첨가 시 가장 낮은 수축률을 나타내어 무위사 아미타여래좌상 보존처리 시소조층의 충전제로 가장 적합한 것으로 판명되었다.

• 한국수산과학회지
• /
• 제17권2호
• /
• pp.83-91
• /
• 1984

$1982{\sim}83$년과 $1966{\sim}70$년의 해양관측자료를 사용하여 하계 우리나라 서해 연안에서 형성되는 조석전선의 형성원인과 그 위치 및 구조를 조사하였다. 하계에 형성되는 전선은 조류에 의한 해저 난류로 연직혼합이 일어나는 곳과 외해와의 경계성이며, 그 위치는 수온, 염분, 용존산소의 수평경도와 수색 및 투명도로써 조사한 결과, G선($35^{\circ}31^'N$)과 S선($35^{\circ}25^'N$)의 연안에서 약 20mile 떨어진 해역이었다. 성층상태를 고려한 위치에너지는 V=10 $Joule/m^3$였으며, 수온, 염분, 용존산소와 수색 및 투명도로 조사한 전선의 위치는 이와 대체로 일치하였다. 따라서 이 역을 경계로 연안쪽은 물리, 화학적인 특성이 연직적으로 균일한 혼합층을 형성한다. 외해쪽에는 수면에서 약 $10{\sim}20m$까지 표면 혼합층, 약층, 그리고 저층 혼합층의 순으로 수괴의 구조가 형성되 어 있다. 동계에는 서해 전역이 표면냉각으로 인하여 전 해역에서 연직혼합이 일어나므로 하계의 구조와 같은 전선은 명확하게 형성되지 않는다.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.85-91
• /
• 2014

In this study, the water quality purification of new medias which were NPS media, hyugato, mineral stone, charcoal for applying soil media of Integrated Management Practices (IMPs) of Low Impact Development (LID) were evaluated. The influent concentrations of COD, T-N, and T-P were 117.8 mg/L, 17.1 mg/L, and 2.062 mg/L, respectively. The infiltration capacities of NPS media, hyugoto, mineral stone, charcoal, and gravel were $7.1{\times}10m/s$, $7.3{\times}10^{-5}m/s$, $7.9{\times}10^{-5}m/s$, $6.0{\times}10^{-5}m/s$, respectively. All media meet criteria of infiltration capacity as surface soil layer at IMPs which is over $1.0{\times}10^{-5}m/s$. Maximum removal rates of COD, T-N, and T-P occurred at Charcoal with 98 % of COD removal rate, NPS with 78 % of T-N removal rate, and hyugato with 75 % fo T-P removal rate, respectively. For more high removal efficiency of all water quality item, the mixed media which is 4.5(NPS media): 1(charcoal) : 4.5 (hyugato) as volume ratio was evaluated. The infiltration capacity of mixed media was $7.9{\times}10^{-5}m/s$ and met the criteria of infiltration as surface soil layer. The water quality removal efficiencies of mixed media were very high with showing 70 % for COD, 85 % for T-N, and 71 % for T-P. The mixed media could purify the water quality of surface runoff and was recommended to used at the LID site of ground water quality problem.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.93.2-93.2
• /
• 2010

Recently, printing and coating technologies application fields have been expanded to the energy field such as solar cell. One of the main reasons, why many researchers have been interested in printing technology as a manufacturing method, is the reduction of manufacturing cost. In this paper, We fabricated CIGS solar cell thin film layer by doctor blade methods using synthesis of CIS precursor nanoparticles ink on molybdenum (Mo) coated soda-lime glass substrate. Synthesis CIS precursor nanoparticles ink fabrication was mixed Cu, In, Se powder and Ethylenediamine, using microwave and centrifuging. Using multi coating process as we could easily fabrication a fine flatness CIS thin-film layer ($0.7{\sim}1.35{\mu}m$), and reduce a manufacture cost and process steps. Also if we use printing and coating method and solution process in each layer of CIGS solar cell (electrode, buffer), it is possible to fabricate all printed thin-film solar cell.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1579-1582
• /
• 2011

Alumina particles wrapped in few-layer graphene sheets were prepared by calcining aluminum nitride powders under a mixed gas flow of carbon monoxide and argon. The graphene sheets were characterized by powder X-ray diffraction (XRD), Raman spectroscopy, electron energy loss spectroscopy, and high-resolution transmission electron microscopy. The few-layer graphene sheets, which wrapped around the alumina particles, did not exhibit any diffraction peaks in the XRD patterns but did show three characteristic bands (D, G, and 2D bands) in the Raman spectra. The dye-sensitized solar cell (DSSC) with the alumina particles wrapped in few-layer graphene sheets exhibited significantly improved overall energy-conversion efficiency, compared to conventional DSSC, due to longer electron lifetime.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.120-128
• /
• 2002

Interfacial cracks in a piezoelectric layer bonded to dissimilar elastic layers under the combined anti-plane mechanical shear and in-plane electrical leadings are considered. By using Fourier cosine transform, the mixed boundary value problem is reduced to a singular integral equation which is solved numerically to determine the stress intensity factors. Numerical results for the effects of the material properties and layer geometries on the stress intensity factors are obtained.