• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.27-36
• /
• 2020

Natural convection and thermal stratification phenomena are found in large water pools that are being used as heat sinks for decay heat removal from the reactor core using passive heat removal systems. In this study, the two-phase (water and air) natural convection and thermal stratification phenomena with conjugate heat transfer in the rectangular enclosure were investigated numerically using ANSYS Fluent 17.2 code. The transient numerical simulations of these phenomena in the full-scale computational domain of the experimental facility were performed. Generation of water vapour bubbles around the heater rod and evaporation phenomena were included in this numerical investigation. The results of numerical simulations are in good agreement with experimental measurements. This shows that the natural convection is formed in region above the heater rod and the water is thermally stratified in the region below the heater rod. The heat from higher region and from the heater rod is transferred to the lower region via conduction. The thermal stratification disappears and the water becomes well mixed, only after the water temperature reaches the saturation temperature and boiling starts. The developed modelling approach and obtained results provide guidelines for numerical investigations of thermal-hydraulic processes in the water pools for passive residual heat removal systems or spent nuclear fuel pools considering the concreate walls of the pool and main room above the pool.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.1-6
• /
• 2006

Single-Camera Stereoscopic Vision three-dimensional measurement system has been developed based upon 30-PTV algorithm. The system consists of one camera $(1k\times1k)$ and a host computer. To attain three-dimensional measurements a plate having stereo holes has been installed inside of the lens system. Three-dimensional measurements was successfully attained by adopting the conventional 30-PTV camera calibration methods. As applications of the constructed measurement system, a water droplet mixed with alcohol was constructed on a transparent plastic plate with the contacted fluid diameter 4mm, and the particles motions inside of the droplet have been investigated with the constructed measurement system. The measurement uncertainty of the constructed system was 0.04mm, 0.04mm and 0.09mm for X, Y and Z coordinates.

• 한국미생물·생명공학회지
• /
• 제49권2호
• /
• pp.201-209
• /
• 2021

Agarwood (Aquilaria spp) has high economic value. However, essential oil production from agarwood is a time-consuming process. Additionally, agarwood leaves have not been utilized even though they contain various bioactive ingredients. In this study, agarwood leaves were fermented using Lactobacillus plantarum ATCC 8014 with or without Stevia (4, 8, and 12%; v/v). The fermented fluid was mixed with maltodextrin (15%; w/v) and subjected to spray drying (inlet temperature, 120℃; outlet temperature, 65-70℃). The contents of polyphenols, polysaccharides, saponins, and flavonoids and the viability of L. plantarum were determined. Fermentation enhanced the levels of bioactive compounds. The contents of polyphenol (69.19 ± 4.05 mg GAE/g of sample), polysaccharide (20.75 ± 0.98 mg GE/g of sample), saponin (305.23 ± 4.21 mg OAE/g of sample), and flavonoid (7.86 ± 0.72 mg QE/g of sample), and the viability of L. plantarum (8.72 ± 0.17 log CFU/ml) were markedly upregulated in the samples containing Stevia (12%; v/v). This indicated that the supplementation of Stevia during fermentation decreases the fermentation time (9 h), upregulates bioactive compound production in agarwood leaves, enhances microencapsulation during spray drying, and increases the viability of L. plantarum under simulated gastric digestion conditions.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.173-181
• /
• 2019

This study was carried out numerically to investigate the flow characteristics in the Venturi tube with $90^{\circ}$ T-branch tube and the inflow of condensed water into the Venturi tube from the branch tube. In this study, the diameter of the branch tube(1, 2, 3mm) and the neck diameter of the Venturi tube(0.3, 0.9, 1.5mm) were varied. The flow rate of the water at the Venturi tube inlet is 80cc/min and the water temperature is 288K. The condensed water temperature at the branch tube inlet is 355K. It was found that the velocity and pressure of the fluid near the branch point in the Venturi tube were more dependent on the diameter of the Venturi tube than the diameter of the branch tube. The temperature of the mixed water at the exit of the Venturi tube was the highest when the Venturi tube's neck diameter is 0.9mm and the branch tube diameter is 2mm. This means that the condensed water is flowing well through the branch tube.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.41-46
• /
• 2017

This study aims to select suitable co-solvents and to obtain optimal process conditions in order to improve process efficiency and productivity through experimental results obtained under various experimental conditions for the etching and rinsing process using liquid carbon dioxide and supercritical carbon dioxide. Acetone was confirmed to be effective through basic experiments and used as the etching solution for MEMS-wafer etching in this study. In the case of using liquid carbon dioxide as the solvent and acetone as the etching solution, these two components were not mixed well and showed a phase separation. Liquid carbon dioxide in the lower layer interfered with contact between acetone and Mems-wafer during etching, and the results after rinsing and drying were not good. Based on the results obtained under various experimental conditions, the optimum process for treating MEMS-wafer using supercritical CO2 as the solvent, acetone as the etching solution, and methanol as the rinsing solution was set up, and MEMS-wafer without stiction can be obtained by continuous etching, rinsing and drying process. In addition, the amount of the etching solution (acetone) and the cleaning liquid (methanol) compared to the initial experimental values can be greatly reduced through optimization of process conditions.

• Bulletin of the Korean Chemical Society
• /
• 제6권4호
• /
• pp.186-191
• /
• 1985

The effect of pressure and temperature on the stabilities of the charge transfer complexes of hexamethyl benzene with iodine in n-hexane has been investigated by UV-spectrophotometric measurements. In this experiment the absorption spectra of mixed solutions of hexamethyl benzene and iodine in n-hexane were measured at 25, 40 and $60^{\circ}C$ under 1,200, 600, 1200 and 1600 bar. The equilibrium constant of the complex formation was increased with pressure while being decreased with temperature raising. Changes of volume, enthalpy, free energy and entropy for the formation of the complexes were obtained from the equilibrium constants. The red shift at higher pressure, the blue shift at higher temperature and the relation between pressure and oscillator strength were discussed by means of thermodynamic functions. In comparison with the results in the previous studies, it can be seen that the pressure dependence of oscillator strength has a extremum behavior in durene as the variation of ${\Delta}H$ or ${\Delta}S$ with the number of methyl groups of polymethyl benzene near atmospheric pressure in the previous study. The shift or deformation of the potential in the ground state and in the excited state of the complexes formed between polymethyl benzene and iodine was considered from the correlation between the differences of the electron transfer energies and the differences of free energies of the complex formation for the pressure variation.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2524-2533
• /
• 2024

When analyzing containment thermal-hydraulics, computational fluid dynamics (CFD) is a powerful tool because multi-dimensional and local analysis is required for some accident scenarios. According to the previous study, neglecting steam bulk condensation in the CFD analysis leads to a significant error in boundary layer profiles. Validating the condensation model requires the experimental data near the condensing surface, however, available boundary layer data is quite limited. It is also important to confirm whether the heat and mass transfer analogy (HMTA) is still valid in the presence of bulk condensation. In this study, the boundary layer measurements on the vertical condensing surface in the presence of air were performed with the rectangular channel facility WINCS, which was designed to measure the velocity, temperature, and concentration boundary layers. We set the laminar flow condition and varied the Richardson number (1.0-23) and the steam volume fraction (0.35-0.57). The experimental results were used to validate CFD analysis and HMTA models. For the former, we implemented a bulk condensation model assuming local thermal equilibrium into the CFD code and confirmed its validity. For the latter, we validated the HMTA-based correlations, confirming that the mixed convection correlation reasonably predicted the sum of wall and bulk condensation rates.

• Journal of Animal Science and Technology
• /
• 제49권5호
• /
• pp.647-656
• /
• 2007

반추동물의 생산효율을 향상시킬 목적으로 반추위 환경을 조절하려는 노력들이 수십년간 지속되어 오면서 그동안 주로 사료급여 및 사양관리 시스템 개발(NRC, 2001)이 근간을 이루어 왔으나, 최근에는 유전공학, 효소공학, 생물공학, 미생물공학, 천연물화학 등의 발전으로 식물추출물, 항생제, 미생물제제, 계면활성제 등 다양한 분야에서 연구가 진행되고 있다 (Yang과 Russell, 1993; 이 등, 1997; Lee 등, 2003; Lee와 Ha, 2003; Busquet 등, 2006). 그 중, 계면활성제인 surfactant는 미생물 세포막 표면에 부착하여 미생물에 대한 산소공급을 차단함으로써 호기성 미생물 성장을 감소시키며 (Hulme와 Stranks, 1970), 세포내, 외의 효소를 유리시켜 효소기능 및 분비를 촉진 하는 것 (Reese와 Maguire, 1969; Munn 등, 1983; Yazdi 등, 1990)으로 알려져 있다. 이러한 surfactant의 작용원리를 이용하여 반추위내 혐기성 발효를 촉진시키기 위한 제제로서 그 가능성이 높이 평가되어 왔는데, 지금까지 반추위 발효 조절 기능이 밝혀진 계면활성제는 비이온성으로서 반추동물의 소화율과 생산성에 기여할 수 있는 제제로서 인정받고 있다. 계면활성제를 이용한 일련의 시험 중, 앞서 수행한 비이온성 계면활성제와 양쪽 이온성(+/－) 계면활성제를 이용한 시험에서 비이온성 계면활성제는 in vitro 반추위 발효양상에 매우 긍정적인 결과를 얻었으나 양쪽 이온성(+/－) 계면활성제는 반추위 미생물에 오히려 독성으로서 작용하는 결과를 얻었다(De Oude, 1992). 또한 양(+)이온성과 음(－)이온성 계면활성제에 대한 국내의 연구가 전무한 사항이라 참고 자료를 찾을 수가 없었다. 따라서 본 시험은 일반적으로 많이 사용하는 양(+)이온 또는 음(－)이온성을 띄는 계면활성제를 선발하여 반추위 발효 성상 및 미생물 합성에 어떠한 영향을 미치는지를 규명해 보고자 실시하였다.

• 대한바이러스학회지
• /
• 제26권2호
• /
• pp.215-225
• /
• 1996

Aseptic meningits, an acute inflammation of the meninges, is a common illness during childhood. Virus is the most important cause of aseptic meningitis. Especially enterovirus causes approximately above 85% of all cases of aseptic meningitis. In 1993, there was a big epidemic of aseptic meningitis by ECHO 9 and ECHO 30 viruses. And ECHO 3 virus was isolated as a causative agent of aseptic meningitis in 1994. This study was aimed to detect the causative agent of aseptic meningitis in 1995 and to analyze the 5'-noncoding region which was used to detect virus. Virus was isolated from 87 stools and cerebrospinal fluid specimens of the patients by cultured RD and HEp-2 cell. Neutralizing antibody tests using enterovirus serum pool were performed on the specimens with cytopathic effect. 3 of ECHO 7 viruses and 5 of Coxsackie B3 viruses were isolated from stool specimens and 1 of ECHO 7 and Coxsackie B3 mixed type was confirmed from cerebrospinal fluid specimens. RNA was isolated from the culture supernatants of infected cells and general primers were selected in highly conserved part of the 5'-noncoding region of the enteroviral genome for RT-PCR. PCR product from this virus showed a 152bp band on gel electrophoresis. Sequence of obtained DNA was compared with prototype sequences by accessing to the Genebank database. 5'-noncoding region of isolated Coxsackie B3 virus, which has point mutations in nucleotide sequence positions 493, 497, 502, 523, was closely related to that of polio virus type 1, Mahoney strain. In case of isolated ECHO 7 virus, nucleotide has been changed from cytosine to thymine at position 581 and from thymine to cytosine at position 583. We concluded the causative agents of the outbreak of aseptic meningitis during June to July in 1995 were both ECHO 7 and Coxsackie B3 virus, and the primer used in this study could allow a rapid diagnosis of enteroviruses by PCR.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권11호
• /
• pp.1521-1530
• /
• 2009

A metabolic study was conducted with four ruminally-cannulated lactating goats (Saanen, 29 weeks lactation, 65${\pm}$5 kg) in a 4${\times}$4 Latin square design with 4 dietary treatments. The goats were fed a basal mixed diet consisting of 80% concentrate and 20% chopped rye grass hay (DM basis, CON). The goats were also fed the CON diet supplemented with soybean oil at a 5% level of the concentrate (SO), the SO diet supplemented with 0.5% of sodium bicarbonate (SO-B) or the SO-B diet supplemented with 30 ppm monensin (SO-BM). The goats were housed in individual pen and the study was conducted for 8 weeks. An increased molar proportion of propionate (C3) was observed at 1 h (p<0.003) and 6 h (p<0.029) post-feeding from all the supplemented diets. Calculated methane emission was markedly decreased prior to morning feeding (p<0.01), and at 1 h (p<0.05) and 6 h post-feeding (p<0.05) in goats fed the supplemented diets. All the supplements increased (p<0.0001) cis9, trans11-CLA content in rumen fluid. Concentrations of both cis9, trans11-CLA (p<0.0001) and trans10, cis12-CLA (p<0.026) were also increased in the milk fat of lactating goats fed the supplemented diets. The SO-B and SO-BM diets further increased CLA content in goat milk compared to the SO diet. All supplements increased unsaturated (UFA, p<0.002), monounsaturated (MUFA, p<0.002) and polyunsaturated fatty acids (p<0.014) and reduced SFA to UFA ratio (p<0.023). The concentration of MUFA was even greater (p<0.002) for SO-BM than for the SO-B diet. In conclusion, feeding soybean oil (5% of concentrate) to lactating goats was a useful way to improve milk fat and to improve fatty acid profile in the milk by increasing potentially healthy fatty acids such as CLA. Supplementation of sodium bicarbonate or sodium bicarbonate with monensin to the soybean oil-based diet increased CLA content further in goat milk. Supplementation of soybean oil may be an effective method to reduce methane emission in lactating goats.