• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.605-612
• /
• 2003

In this study, the performance of the cut-off wall with the specific functional adsorption layers(containing SAC), which are formed in order to block harmful materials such as heavy metal ions contained in leachate (or outflow water) from either waste landfills or exhausted mines, was Investigated by determining experimental data such as hydraulic conductivities, unconfined compression strengths, adsorption capacities. The performance was compare to those of the present cut-off wall materials such as clay, bentonite-mixed soil, and soil-cement.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.141-145
• /
• 1999

The study was conducted for the efficient utilization of biomaterials such as Chestnut shell which was wasted tremendously as an agricultural by-products. This biomaterials were examined for their removal rate of heavy metal ions as adsorbents in wastewater by batch adsorption experiments. In this experiment, the heavy metal ions used were $\Cd^{2+},\;Fe^{2+},\;Cr^{6+},\;Mn^{2+},\;Cu^{2+}$ and $Pb^{2+}$. The range of time for the removal rates of heavy metal ions were observed about 10 min. The range of high pH for the removal rates of $\Cd^{2+},\;Fe^{2+},\;Mn^{2+},\;Cu^{2+}$ and $Pb^{2+}$ ere observed 7.0-9.0. The range of high pH for the removal rate of $Cr_{6+}$ was observed 2. In the case of raw chestnut shell, the removal rates of $\Fe^{2+},\;Mn^{2+},\;Cu^{2+}$ and $Pb^{2+}$ were above 70 percent. The removal rates of heavy metals in formaline pretreated chestnut shells except $Cd_{2+}$ were above 50 percent and in phosphorylating chestnut shells except $Cr_{6+}$ were above 60 percent. Chestnut shells pretreated by formaline and phosphorylating were not so good enough for improvement of removal rates with pH change in mixed heavy metal solution.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.422-425
• /
• 2005

Spectral characteristics depending on soil constituents and their proportion in a soil were firstly studied for monitoring of soil contamination using hyperspectral remote sensing. The reflectance spectra of heavy metals in soils were investigated in the VIS-NIR-SWIR regions (400-2500 nm) to observe spectral variation as a function of constituents and concentrations. Commercial kaolinite soils mixed with lead, copper, arsenic, and cadmium were used as synthetic soil samples for spectral measurement. In case of copper, relatively spectrally active regions was observed with some band shift whereas other heavy metals had only simple spectral variations expected to be related to the sorption phase and the amount of metal onto kaolinite. The reflectance spectrum of each metal on kaolinite could be identified in VIS-NIR region.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.427-437
• /
• 2013

Generation rate of construction wastes in Korea has occupied preponderantly in recent years. To understand chemical properties of recycled concrete aggregate (RCA), RCA samples were tested for their leaching characteristics. Leaching tests were conducted according to Korean Standard Leaching Test (KLT) and Toxicity Characteristics Leaching Procedure (TCLP) respectively. The RCA samples were characterized using X-ray fluorescence (XRF). Alkalinity of the leachate was determined using a pH meter titration method. The XRF analysis result shows that the calcium oxide (CaO) content in the RCA sample is 25.3~50.4 %. When the RCA sample was mixed with water in a batch reactor, pH in the solution was rapidly increased, and 70% of the total pH change was found in 1 hour. The TCLP showed slightly higher efficiency for leaching heavy metals than the KLT. The leaching efficiency was also higher as the particle size of RCA sample was smaller. The leaching test results suggest that RCA can be generally classified as nonhazardous waste.

• Journal of Korean Society on Water Environment
• /
• v.30 no.4
• /
• pp.403-408
• /
• 2014

The toxicity of heavy metals (Zn, Pb) and diesel, in single and binary solution was investigated using the photobacterium Vibrio fischeri (Microtox test) as a test organism. In this experiment, the concentration of water soluble fraction of diesel was based on the total petroleum hydrocarbon (TPH). The toxicity of each single compound showed the following $EC_{50}$ (15min): Zn 1.90 mg/L, Pb 0.31 mg/L, TPH 2.09 mg/L. The observed toxicity of binary mixtures increased, depending on the concentration of the mixed substance. The effects were defined as synergistic, antagonistic, or additive, in accordance with the sign of difference between the predicted and observed toxicity at binary mixtures. The interactive effects between zinc and lead were synergistic, on the other hand, antagonistic and additive effects were found in each metal and TPH mixtures on the bioluminescence of V. fischeri.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1455-1471
• /
• 2009

In order to investigate on the effect of stabilization methods for rice paddies contaminated by heavy metals, a series of lab-scale model test was carried out by applying the characteristics of submerged Paddy soil. To perform the lab-scale model test, columns were made by acrylic with the dimension of diameter=10cm, thickness=0.5cm and were filled with soils which was contaminated were mixed with stabilization agents(lime stone 5% and steel refining slag 5% respectively). To manipulate the reduction condition, soils in the columns were submerged with distilled water. And then soil water and subsurface water in each column were sampled in the regular term and analysed the various physical and chemical properties.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.251-257
• /
• 2008

Food compost, having a higher organic contents than soil, could be an alternative material to prevent the proliferation of heavy metals contamination in soil. In this study we used a convection-dispersion local equilibrium sorption model(CDE) and a two-site non-equilibrium sorption model to find the effects on the adsorption and transportation of Pb by mixing food compost with soil and we also tried to find the effect of velocity and concentration of the injected solution on the characteristics of Pb. We measured Pb concentrations in injection-liquid and in effluent, and then applied them to CXTFIT program. As a result of column experiments, some parameters(D, R, ${\beta}$, ${\omega}$) used in two-site non-equilibrium adsorption model were obtained. Characteristics of Pb adsorption and transport were analyzed using the parameters(D, R, ${\beta}$, ${\omega}$) obtained from the CXTFIT program, We could know that mixed soil with food compost showed a higher adsorption capacity from the retardation factor(R) calculated from the breakthrough curve(BTCs) of Pb. Rs of soil and mixed soil are 20.45, 37.45 respectively, indicating that the adsorption and the transportation characteristics could be accessed quantitatively by using of two-site non-equilibrium adsorption model.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.344-347
• /
• 2003

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.

• Journal of Environmental Science International
• /
• v.13 no.5
• /
• pp.479-488
• /
• 2004

Five sediment cores from the tidal flat of artificial Lake Shihwa are analyzed in terms of sedimentology and geochemistry to evaluate the heavy metal contamination and redox condition of surficial sediment following the Shihwa seawall construction. The variability of concentrations of various elements depends on the depositional environment, and reflects the various redox conditions and sediment provenances. The amounts of Ti and Al and their ratio of Ti/ Al with respect to Li clearly indicate that there is an anthropogenic contribution to the surficial sediment. The high concentrations of heavy metals suggest an anthropogenic contribution at ST. 34 and ST. 22. Concentrations of most elements (Cr, Cu, Zn and Pb) are higher near the Shihwa-Banwol industrial complex than in the central part of Lake Shihwa. Concentrations of heavy metal in surficial sediment near the Shihwa-Banwol industrial complex are two to eight times higher than in the center of Lake Shihwa. Enrichment factors (EF), which are normalized by the unpolluted shale, suggests a significant metallic contamination near the Shihwa-Banwol industrial complex (SBIC). The redox condition is divided into two anoxic and mixed oxi $c_oxic zones based on the carbon:sulfur (C/S) ratios of organic matter and elemental relationships. Correlations among geochemical elements Mn, U and Mo are significantly different from site to site, and may therefore be an indicator of the spatial redox condition. Controlling factors for switching anoxic/oxic conditions are thought to be water depth and the differences in industrial effluent supply. The variations of the Cu/Mn ratio in the sediments confirms above mentioned spatial differences of a redox condition in part, and therefore shows a location-dependence redox condition in sediments at four other sites. The redox condition of the surficial sediment characteristics of the Shihwa Lake are controlled by its geographic location and water depth.th.

• Toxicological Research
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2006

One of the main attractions of treatment with herbal medicine is its apparent lack of side effects compared with the drug therapies used in allopathic medicine. However, evidence from various countries suggest that Asian herbal medicine carry a significant risk of contamination with toxic heavy metals at levels that may seriously threaten health. The aims of this study were to analyze and compare concentrations of heavy metals in urine and hair from 184 patients taking herbal medicines in the form of decoctions and/or pills in comparison to 101 control subjects taking either Western or no medications. Levels of metal concentrations exceeding WHO reference values were observed in a number of hair and urine samples for all subjects. After adjusting for potential confounders, taking decoctions or pills was associated with higher levels of some metals (such as Cu, Pb in urine), as well a higher odds ratio of exceeding the upper limit of reference ranges for Pb, Hg in hair. In contrast, taking decoctions or pills was associated with lower levels of some metals (such as Cu in urine and Cd, Cu, Hg, Pb in hair), suggesting that some herbal medicines may have a chelating effect on heavy metals in the body. Overall, the results obtained in the study show a mixed picture and suggest that heavy metals contamination in herbs is sometimes present, but may also be counteracted by the potential for some herbal medicines to act as chelating agents. Further study must be followed to obtain more concrete evidence.