• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.543-552
• /
• 2008

ATIS(Advanced Traveler Information System) is the system to offer a real-time traffic information or traffic situation for the benefit of the client. One of traffic information collection methods for ATIS research is the method of image analysis. The method is divided into two : one is the method to set two loop detectors at the area and the other is the method detecting the vehicle through an image analysis. In this paper, we propose a real-time traffic information collection system to mix two methods. The system installs multiple virtual detection lines and traces the location of the vehicle. Use of multiple virtual detection lines supplements the defect of the method of loop detectors. And we drew a representative pixels in the detecting area and used it for image analysis. This is to solve the problem of time delay which increases as the image size increases. We gathered traffic images and experimented using the system and got 92.32% of detection accuracy.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.237-243
• /
• 2014

The environmental problem is serious due to global warming In a concrete industry, the effort to reduce the problem of the destruction of environment arising from the indiscriminate use of limestone that is the raw material of cement and aggregate and the exhaustion of resources are continually emphasized In this research, the waste porcelain and waste glass that are the natural aggregate substitute materials were mixed and were applied. In addition, the magnesia phosphate composite and fly ash are mixed with a cement substitute material and the properties of the artificial stone was examined. Density, water absorption, rate of aggregate on the surface, compressive strength, and flexural strength were performed. As a result of the test, it is that waste glass with 60% and waste porcelain with 70% are the most excellent mix to produce the artificial stone.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.35-40
• /
• 2013

The use of slurry with a mix of abrasives and coolant for making Wire Saw in the photovoltaic industry has sharply increased with the semiconductor wafer. In this paper, the slurry was isolated, purified and dried by microwave drying method with high-purity silicon carbide powder obtained through chemical processing. Dried slurry bulk was first pulverized and chemical treatment was applied to produce powder. The produced slurry powder was then analyzed by going through the following analysis; thermal analysis, particle size analyses: SEM shots, elemental analysis, XRF and XRD. The results of this study found the recovery rate of the power obtained though the chemical processing to be higher than the one obtained from mineral processing. The results anticipate infrastructure building and active responses to increasingly stronger domestic and international environmental regulations through the integration and recycling of large amounts of slurry in the photovoltaic industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.2
• /
• pp.214-221
• /
• 2012

Recently, the biochip which is a prime representation of NT, IT, BT, as an example of convergence technology, has been frequently mentioned. With the recent rapid advance in biotechnology, these compact devices, such as lab-on-a-chip or u-TAS, have been developed, and more research is needed. These compact devices typically use the micro-channel in order to shed or detach and mix a variety of materials. Specially, in micro-fluidic systems, a mixer is necessary to produce a mixture because only laminar flow occurs at a low-Reynolds number. To solve this problem, HVM a micromixer that induces a horizontal and vertical multi-mixing flow motion, is proposed. The mixing performance was analyzed and verified by optimizing the shape through the CFD analysis and evaluating the structural analysis and the soundness with material properties that are obtained through the basic experiment.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.2
• /
• pp.53-61
• /
• 2014

Previous studies reveal the need for a tool to cost estimation of building design in early design stages. This paper proposes an internal finishes cost model tool to address this need. The tool allows users to evaluate the functionality, economics and quality of finishes concurrently with high-rise building design. Lack of information in the early stages of the project enables a relatively accurate estimates of work to raise up. Measurements are automatically extracted from simple design information and profile driven estimates are revised in real-time. The data model uses a flexible unit rate system that can easily be extended to other estimate dimensions such as mix-use building surcharge rate estimation. The approach illustrated in this paper is applicable to BIM tool conceptual estimation that support for massing purposes other than the one chosen for this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.171-175
• /
• 2010

This paper presents the experimental results of frost durability characteristics including freezing-thawing and de-icing salt scaling of the concrete for gutter of the road and marine structure. Mixtures were proportioned with the three level of water-binder ratio(W/B) and three binder compositions corresponding to Type I cement with 0%, 30% and 50% GGBS(Ground granulated blast furnace slag) replacement. Also, two different solutions of calcium chloride were used to evaluate their effect on the frost durability resistance. Specially, in case of complex of freezing and thawing with salt and carbonation, the deterioration of concrete surface is evaluated. Test results showed that the BFS30 and BFS50 mixture exhibited higher durability and lower mass loss values than those made with OPC mix and the use of GGBS can be used effectively in terms of economy and frost durability of the concrete to be in complex deterioration. Therefore, the resistance to complex deterioration with freezing-thawing was strongly influenced by the strength and the type of cement.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.86-92
• /
• 2010

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. but the color of concrete is very monotony, so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial granulated blast furnace slag and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that the flow dropped mixing of pigment. but flow increased in proportion to the mixing rate in occasion of mortar that mix granulated blast furnace sla and black mortar which was made granulated blast furnace slag has more visible black color than any mortar.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2016

PURPOSES : This study primarily focused on evaluating the performance characteristics of 4.75-mm nominal maximum aggregate size (NMAS) asphalt mixtures for their more effective implementation to a layered flexible pavement system. METHODS : The full-scale pavements in the FDOT's accelerated pavement testing (APT) program, including 4.75-mm mixtures at the top with different thicknesses and asphalt binder types, were considered for the faster and more realistic evaluation of the rutting performance. The results of superpave indirect tensile (IDT) tests and hot-mix asphalt fracture mechanics (HMA-FM) based model predictions were used for cracking performance assessments. RESULTS : The results indicated that the rutting performance of pavement structures with 4.75-mm mixtures may not be as good as to those with the typical 12.5-mm mixtures, and pavement rutting was primarily confined to the top layer of 4.75-mm mixtures. This was likely due to the relatively higher mixture instability and lower shear resistance compared to 12.5-mm mixtures. The energy ratio (ER) and HMA-FM based model performance prediction results showed a potential benefit of 4.75-mm mixtures in enhanced cracking resistance. CONCLUSIONS : In relation to their implementation, the best use of 4.75-mm mixtures seem to be as a surface course for low-traffic-volume applications. These mixtures can also be properly used as a preservation treatment that does not necessarily last as long as 12.5-mm NMAS structural mixes. It is recommended that adequate thicknesses and binder types be considered for the proper application of a 4.75-mm mixture in asphalt pavements to effectively resist both rutting and cracking.

• Korean Journal of Community Nutrition
• /
• v.8 no.1
• /
• pp.62-70
• /
• 2003

This article aims to summarize the development and application of menu engineering technique, 'Menu Engineering Modified by Preference (MEMP)'. The site selected for this project was a foodservice operation in Yonsei University residence hall. Sales and food costs data were collected from the daily sales reports for 1 month, and the survey of food preference was conducted during May, 1999. Statistical data analysis was completed using the SAS/Win 6.12 for descriptive analysis. The calculation for menu analysis were carried out with MS 2000 Excel spreadsheet program. This MEMP technique developed had 6 category criteria and 2 dimensions of the contribution margin (CM) and the menu mix modified% (MMM%) . The MMM% was calculated by the sales volumes and also weighted by food preference. The CM and MMM% for each item were compared with a mean menu CM as well as a 70% rule. Four possible classifications by MEMP were fumed out as 'STAR', 'PLOWHORSE', 'PUZZLE', 'DOG'. 'STAR' items were the most popular and profitable items and required to maintain rigid specifications for quality. The decision actions for 'PLOWHORSE' menu items which were relatively popular, but yield a low menu average CM included combining a plowhorse item with lower cost products and reducing the frequency of serving or serving size. There was a need for 'PUZZLE' items to be changed in the menu combination, improve recipe, and promote menu. The last DOG' items were desired to be deleted. This study demonstrates that menu information can be interpreted more easily with MEMP. The use of MEMP is therefore an effective way to improve management decisions about menu of university residence hall foodservice.

• The Korean Journal of Archival Studies
• /
• no.8
• /
• pp.96-136
• /
• 2003

To understand modern society, I think we should know both public records and corporate records. However, the business archives are in private sector for their great importance of current value. The corporates expect cost-benefit effect, management of the business archives are relatively inferior. In this article, I would study the archival management in the POSCO, a similar public corporation, through the archival theory and the research papers for the business archives management in the United States. I examined the POSCO's records category and management department to prescribe in the POSCO's related rules. And I map out organizational status of the POSCO Museum in the POSCO I examined activities of the POSCO's archives acquisition method about the records which left out the records management rules, unavoidably scattered and lost, or the records related the POSCO are created outer the corporation. I made up arrangement scheme of the archives with it and gave the code to mix the character and the figure. In accordance with the arrangement scheme of archives, I extracted the description elements of organizational structure and function and of real records. The former is guide level and the latter is in detail. The POSCO Museum used the business archives to publish the corporate history and to exhibit, but in another corporation, usage of the business archives was various, it is contacted current activities of the corporation. Through the case study, the archivist in the corporate archives developed the contemporary values to use the archives of the corporation. And I presented the potential of the POSCO's Museum to become corporate archives in the POSCO.