• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.58.2-58.2
• /
• 2019

BITSE is a technology demonstration mission to remotely measure the speed, temperature, and density of the solar wind as it forms as close as 3 Rs. BITSE obtained coronal images during its one day flight above more than 99% of the atmosphere, and calibration data are taken in the laboratory as well as during the flight. As the linearly polarized K-corona is much fainter than other bright sources like diffraction, sky, and F-corona, a careful data reduction is required to obtain reliable scientific results. We will report status of the obtained data, the reduction progress, and future plan.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.147-154
• /
• 2002

This paper describes the devlopment and implementation for the KOMPSAT-1 scheduling & automatic command plan generator(KSCG). Some problems in mission planning and command planning had occurred using the mission & command planning s/w in MAPS(Missin Analysis and Planning Subsystem) during the LEOP(Launch & Early Orbit Phase) & early normal mission phase due to lots of manual input process and non-automatic process. Therefore, the more mission operations for KOMPSAT-1. In order to prevent the development of new one(KSCG) which should reduce the manual process and generate automatically the command plan has been needed. As a result, the mission operations of KOMPSAT-1 has greatly became stable and more effient.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.227-232
• /
• 2001

IPresented is a small and handy remotely piloted vehicle(RPV) that can be used for military and non-military surveillance operations. The RPV is equipped with an on-board high resolution color camera to transmit the analog video images and on-board electronics to provide real-time flight information to the pilot, thereby enabling him/her to remotely pilot within the range of 5 km radius. This paper describes the RPV system including its design, manufacturing and flight test results which manifest the stability of on-board mission and flight equipment as well as the remote piloting capability. A future plan for necessary improvements identified from the flight tests are also discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.354-361
• /
• 2018

This paper describe the Lateral Navigation algorithm design and verification that implementation on Mission Computer's OFP for Korean Utility Helicopter(KUH) instead of Auto Flight Control System(AFCS) Vehicle Management System. The LNAV function transmits Roll command into the AFCS System. The Roll command value will be calculated by control algorithms in MC. The Operational Flight Program(OFP) shall use for its calculations different measurements of the aircraft's attitude and place. Using these inputs, the OFP will translate a navigational demand(for example-to perform the selected flight plan) into Roll commands to the autopilot. By conducting integration test using SIL and ground test, flight test, it is confirmed that the introduced algorithm meets the requirements of the Mission Equipment Package(MEP) system. LNAV function is verified through the System Integration Laboratory(SIL) test, ground and flight test.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.79.3-79.3
• /
• 2021

The Korea Astronomy and Space Science Institute (KASI) has been developing a diagnostic coronagraph to be deployed in 2023 on the International Space Station (ISS) in collaboration with the NASA Goddard Space Flight Center (GSFC). The mission is known as "Coronal Diagnostic Experiment (CODEX)", which is designed to obtain simultaneous measurements of the electron density, temperature, and velocity using multiple filters in the 2.5-10 Rs range. The coronagraph will be installed and operated on the ISS to understand the physical conditions in the solar wind acceleration region, and to enable and validate the next generation space weather models. In this presentation, we will introduce recent progress and future plan.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.405-413
• /
• 2011

Defense Systems Test Center in ADD supports increasingly various missile test requirements such as higher altitude event, multi target operation and low-altitude, high velocity target tracking. In this paper, we have proposed the development of instrumentation radar tracking status simulator based on virtual reality. This simulator can predict the tracking status and risk of failure using several modeling algorithms. It consists of target model, radar model, environment model and several algorithms includes the multipath interference effects. Simulation results show that the predict tracking status and signal are similar to the test results of the live flight test. This simulator predicts and analyze all of the status and critical parameters such as the optimal site location, servo response, optimal flight trajectory, LOS(Line of Sight). This simulator provides the mission plan with a powerful M&S tool to rehearse and analyze instrumentation tracking radar measurement plan for live flight test at DSTC(Defense Systems Test Center).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.177-188
• /
• 2024

The strategic UAV for theater level ISR(Intelligence, Surveillance and Reconnaissance) mission typically has numerous ground targets over area of responsibility(AOR) or area of operation(AO). It is necessary to automatically incorporate these multitude of ground targets into mission planning process in order to collect ISR images before actual flight mission. In addition, weather information such as wind direction and/or velocity may have significant impacts on the qualities of collected sensor images, especially in SAR(Synthetic Aperture Radar) images. Thus weather factors in the operation altitude should also be considered in the mission planning stage. In this study, we propose a novel mission planning scheme based on target scheduling and deviation correction method incorporating weather factors.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.64-74
• /
• 2021

Unmanned Aircraft Systems (UAS) are rapidly emerging not only as a key military power, such as surveillance and reconnaissance for military purposes but also as a new air transportation means in the form of Urban Air Mobility (UAM). Currently, airworthiness certification is carried out focused on the verification of technical standards for flight safety suitability of aircraft design in accordance with the Military Aircraft Flight Safety Certification Act and does not employ the model for operational risk assessment for mission areas and airspace. In this study, in order to evaluate the risk of the mission area from the perspective of the UAS operator, a risk assessment simulation has been conducted by applying the Specific Operations Risk Assessment (SORA) model to the operating environment of the Korean military UAS. Also, the validity of the SORA model has been verified through the analysis of simulation results, and a new application plan for airworthiness certification of the military unmanned aerial system has been presented.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.133-143
• /
• 2023

This paper describes the system integration laboratory's requirement analysis, implementation, and verification for multiple-scenario unmanned aerial vehicle operation and control technology using a manned rotorcraft for Manned-Unmanned Teaming. System integration laboratory consists of manned rotorcraft flight simulation, unmanned aerial vehicle flight and mission equipment simulation, ground control system simulation for unmanned aerial vehicle control and change in the control authority between the ground control system and manned rotorcraft, and operation and control system for mission plan's writing and transmission. Each implemented simulation verified the requirements through software and hardware integration test.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.981-988
• /
• 2023

As the usage of unmanned aerial vehicles expands, the development and the demand of related technologies are increasing. As the frequency of operation increases and the convenience of operation is emphasized, the importance of related autonomous flight technology is also highlighted. Establishing a path plan to reach the destination in autonomous flight of an unmanned aerial vehicle is important in guidance and control, and a technology for automatically generating path plan is required in order to maximize the effect of unmanned aerial vehicle. In this study, the optimization research of path planning using rapid-exploring random tree method was performed for increasing the effectiveness of autonomous operation. The path planning optimization method considering the characteristics of the unmanned aerial vehicle is proposed. In order to achieve indexes such as optimal distance, shortest time, and passage of mission points, the path planning was optimized in consideration of the mission goals and dynamic characteristics of the unmanned aerial vehicle. The proposed methods confirmed their applicability to the generation of path planning for unmanned aerial vehicles through performance verification for obstacle situations.