• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.213-221
• /
• 2011

Avionics system tends to be designed to have the integrated architecture, and it is getting difficult and complex to verify the flight-critical function because of sophisticated structure. In Korean Utility Helicopter, mission computer acts as the MUX Bus Controller to handle the data from both communication, identification, mission/display and survivability equipment inside Mission Equipment Package and aircraft subsystems such as fuel system and electrical system while it is interfacing with Automatic Flight Control System and Full-Authority Digital Engine Control via ARINC-429 bus. The Flight Displays which is classified as flight-critical function in aircraft is implemented on Primary Flight Display after mission computer processes data from AFCS in order to generate graphics. This paper defines the flight-critical function implemented in mission computer for KUH, and presents the static and dynamic test procedures which is performed on System Integration Laboratory along with Playback Recorder prior to flight test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.813-822
• /
• 2010

Integrated data processing for display of flight critical data and mission critical data was conducted without additional display instruments using glass cockpit design. Based on a pre-designed flight critical system and a mission critical system, this paper shows an optimal design of subsystem integration. The design satisfies safety requirements of flight control systems(FCS) and requires minimized modification of pre-designed systems. By conducting integration test using System Integration laboratory(SIL), it is confirmed that the introduced design approach meets the safety requirements of the MEP system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.388-396
• /
• 2011

Mission Equipment Package(MEP) system is a collection of avionic components that are integrated to perform the mission of the Korean Utility Helicopter(KUH). MEP system development is classified mission-critical embedded system but KUH MEP system developed including flight-critical data implementation. It is important to establish the good development and verification process for the successful system development. This paper describe the development and verification process in each phase for the KUH MEP system. MEP system design is verified through the qualification test, system failure test and compatibility test in System Integration Laboratory(SIL).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.419-427
• /
• 2020

In the case of large combined weapon systems, such as submarines, the application, and verification of methods of setting the reliability, availability, and maintainability (RAM) target values for conventional weapon systems are limited. Submarines are complex weapon systems with the characteristics of the diversity of operation mode summary and mission profiles (OMS/MP) as well as equipment complexity because they are composed of multiple weapon systems, such as sonar systems and armed systems. Therefore, this study analyzed the development cases of existing weapon systems, i.e., the RAM target value-setting cases, and derived the problems and limitations of the cases to present measures to improve the setting and verification of the ram target values of submarines. In addition, submarines operate around the world and have different operating and maintenance conditions. Therefore, a submarine's ram target values should be set and verified centering on the mission essential equipment and mission critical equipment, instead of all components that constitute weapon systems. This study examined a method to verify the required performance RAM target-value setting, considering the characteristics of submarines as well as the physical performance requirements for the systems and equipment of submarines that must be considered when implementing national defense acquisition projects for submarines.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.31-36
• /
• 1999

The development of a low earth orbit microsatellite is recognized as a good means of enhancing the technological capability, to gain experience and to train engineers to acquire knowledge and experience in space systems. Most developed countries in space technology do not allow the transfer of critical space technologies such as technology involved in attitude determination and control systems. And the export of critical components and equipment such as high precision attitude sensors is tightly controlled. Therefore it is inevitable to independently acquire self-design and manufacturing capability to implement a satellite mission. The KITSAT-3 program was aimed at verifying the capability to design, develop and operate an indigenous microsatellite system, which includes such critical technologies and associated components and equipment, as well as train engineers. KITSAT-3 was launched on May 26, 1999 using the Indian launcher PSLV-C2. The operations team has successfully performed a full functional checkout during the launch and early operations phase and the satellite is presently in a normal operations mode. This paper introduces the KITSAT-3 program and the results of the initial operations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.320-326
• /
• 2021

AVTE(Air Vehicle Test Equipment) is an equipment to inspect and check the status of on-board aircraft LRUs(Line Replacement Units) before and after flight for performing successful UAV(Unmanned Aerial Vehicle) missions. This paper suggests utilization of the AVTE as an operation support-equipment by implementing several critical functions for UAV-operation on the AVTE. The AVTE easily sets initialization(default) data and compensates for the installation and position errors of the LRUs which provide critical mission data and situation image with pilots without additional individual operation support-equipment. Major fault list and situation image data could be downloaded after flight using the AVTE in the event of UAV emergency situation or unusual occurrence on duty as well. We anticipate the suggested operational approach of the AVTE could dramatically reduce the cost and man power for design and manufacture of additional operation support equipment and effectively diminish workload of the operator.

• Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.6-11
• /
• 2009

It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its final performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and to reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for controlling and monitoring sub-contractors which were participated in Ka band Communication Payload System (COPS) development. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product performed by local companies from site survey for selecting companies to delivery of their equipment.

• Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.22-27
• /
• 2008

It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the Communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for Ka band Communication Payload System which was established and performed during the Qualification Model (QM) manufacturing phase. In this paper, we present detailed process for the products manufactured by local companies according to PA procedures operated through whole phases from design to test of equipment. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product quality manufactured by local companies.

• Journal of Korean Society for Quality Management
• /
• v.21 no.2
• /
• pp.1-16
• /
• 1993

Early generations of products had little to no inherent capability to test themselves. The technologies involved often required only visual inspection and limited probing to troubleshoot the system once it was turned over to maintenance personnel. However, as the complexity of military and commercial systems grew, symptoms of failure became less noticeable to the operator. Therefore, the procedure to access, inspect, repair and replace a component became complicated, the requirements for personnel skill and testing equipment increased. and it took too long of a time to maintain a system. Meanwhile, the need for availability became more mission-critical and maintenance become very expensive. The obvious solution was to design in-system circuits or devices to self-test the primary system, the Built-In-Test(BIT) was born. This approach has continued right on up through present systems and is an integral part of systems now being designed. The object of this paper is to present a state-of-the-art research for filtering out the BIT diagnosis mistakes using Bayesian analysis and develop the algorithm for Redundant systems with BIT to improve BIT diagnosis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.95-100
• /
• 2003

Electronic equipment used in satellites are demanding extremely high reliability, so they should be designed to have immunity for some critical faults by using redundancy component. Generally, Communication satellites are assigned to meet the 15 years mission lifetime, of the analysis about faults must be performed to electronic equipments of satellite. This paper is a summary of the fault tolerance design research of command processor, the improvement of reliability and trade-off study of fault tolerance design result. The reliability prediction value of the satellite component used in this research was taken from Koreasat 3 and Kompsat 1. It is important to perform many trade-off studies for fault tolerance design, especially to choose the most proper fault tolerance method for the specified fault scenario.