• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1325-1328
• /
• 2007

When we visualize the sound field radiated from a spherical sound source, spherical acoustic holography is proper among acoustic holography methods. However, there are measurement errors due to sensor position mismatch, sensor mismatch, directivity of sensor, and background noise. These errors are amplified if one predicts the pressures close to the sources: backward prediction. The goal of this paper is to quantitatively examine the effects of the error due to sensor position mismatch on acoustic pressure estimation. This paper deals with the cases of which the measurement deviations are distributed irregularly on the hologram plane. In such cases, one can assume that the measurement is a sample of many measurement events, and the cause of the measurement error is white noise on the hologram plane. Then the bias and random error are derived mathematically. In the results, it is found that the random error is important in the backward prediction. The relationship between the random error amplification ratio and the measurement parameters is derived quantitatively in terms of their energies.

• 소음진동
• /
• 제8권6호
• /
• pp.1023-1029
• /
• 1998

When one attempts to construct a hologram. one finds that there are many sources of measurement errors. These errors are even amplified if one predicts the pressures close to the sources. The pressure estimation errors depend on the following parameters: the measurement spacing on the hologram plane. the prediction spacing on the prediction plane. and the distance between the hologram and the prediction plane. This raper analyzes quantitatively the errors when these are distributed irregularly on the hologram plane The sensor mismatch and inaccurate measurement location. position mismatch. are mainly addressed. In these cases. one can assume that the measurement is a sample of many measurement events. The bias and random error are derived theoretically. Then the relationship between the random error amplification ratio and the parameters mentioned above is examined quantitatively in terms of energy.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.795-798
• /
• 2005

In this paper, we analyses of additive crypto-module architecture for a sensor network. Recent research in sensor networks has raised security issues for small embedded devices. Security concerns are motivated by the development of a large number of sensor devices in the field. Limitations in processing power, battery life, communication bandwidth and memoryconstrain devices. A mismatch between wide arithmetic for security and embedded data buscombined with lack of certain operations. Then, we compared the architecture of crypto-module in this paper.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.289-294
• /
• 2002

ZnTe films have been grown on (100) GaAs substrate with two representative problems. The one is lattice mismatch, the other is thermal expansion coefficients mismatch of ZnTe /GaAs. It claims here, the relationship of film thickness and defects distribution with (100) ZnTe/GaAs using hot wall epitaxy (HWE) growth was investigated by transmission electron microscopy (TEM). It analyzed on the two-sort side using TEM with cross-sectional transmission electron microscopy (XTEM) and high-resolution electron microscopy (HREM). Investigation into the nature and behavior of dislocations with dependence-thickness in (100) ZnTe/ (100) GaAs hetero-structures grown by transmission electron microscopy (TEM). This defects range from interface to 0.7 $\mu\textrm{m}$ was high density, due to the large lattice mismatch and thermal expansion coefficients. The defects of low density was range 0.7$\mu\textrm{m}$~1.8$\mu\textrm{m}$. In the thicker range than 1.8$\mu\textrm{m}$ was measured hardly defects.

• 한국음향학회지
• /
• 제24권2호
• /
• pp.87-96
• /
• 2005

해양환경에서 정합장처리를 통해 음원위치를 추정할 경우 실측신호의 음장과 복제음장 사이에 각종 매개변수의 오정합이 발생하여 상관값의 저하와 함께 음원 위치추정 결과에 바이어스를 발생시킨다. 본 논문에서는 정합장처리를 이용한 음원 위치추정에서 해양환경 및 시스템 오정합 매개변수로 인한 바이어스와 상관값의 변화 그리고 민감도에 대해서 고찰하였다. 이를 위해 Pekeris 해양 도파관에서 수치실험을 수행하였으며, 그 결과 매개변수 오정합이 음원 위치에서의 바이어스와 상관값의 감소를 발생시켰다. 또한 매개변수 민감도 평가를 통해 배열의 경사와 수심, 해저면 수심과 해저층의 음속이 민감도가 높음을 확인 할 수 있었다.

• 한국산업정보학회논문지
• /
• 제22권3호
• /
• pp.27-38
• /
• 2017

본 연구는 다수의 개인 사용자들이 휴대폰 카메라를 통하여 공연장 등에서 녹화한 다수의 영상을 스티칭하는 방법을 제시한다. 기존 고정형 리그(Rig)를 사용하는 360 카메라 솔루션과 대비하여, 시간 동기화, 반복적 변환행렬계산 및 카메라 센서 불일치 보정과 같은 새로운 문제들을 해결해야한다. 이 논문에서는 오디오를 사용한 시각동기화 방법, 색상 전달 방식에 따른 센서 불일치 제거, 전역 동작 안정화 알고리즘을 사용하여 변환 행렬의 업데이트를 함으로써 이러한 문제를 해결하였다. 또한, 카메라의 움직임이 크지 않은 경우에서, 제안 된 알고리즘은 화면 별 스티칭을 하는 경우 보다, 계산 속도와 화질 면에서도 우수한 성능을 보임을 실험을 통하여 확인하였다.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1308-1316
• /
• 2017

The distributed maximum power point tracking (DMPPT) concept is widely adopted in photovoltaic systems to avoid mismatch loss. However, the high cost and complexity of DMPPT hinder its further promotion in practice. Based on the concept of DMPPT, this paper presents an integrated submodule level half-bridge stack structure along with an optimal current point tracking (OCPT) control algorithm. In this full power processing integrated solution, the number of power switches and passive components is greatly reduced. On the other hand, only one current sensor and its related AD unit are needed to perform the ideal maximum power generation for all of the PV submodules in any irradiance case. The proposal can totally eliminate different small-scaled mismatch effects in real-word condition and the true maximum power point of each PV submodule can be achieved. As a result, the ideal maximum power output of the whole PV system can be achieved. Compared with current solutions, the proposal further develops the integration level of submodule DMPPT solutions with a lower cost and a smaller size. Moreover, the individual MPPT tracking for all of the submodules are guaranteed.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1645-1650
• /
• 2015

This paper presents the 3-dimensional electromagnetic field analysis method and correction of sensor distortion that is used by a motor speed sensor. The magnetic sensors are being expanded due to lower price than the other speed sensors such as resolver and encoder. Magnetic sensor generates sine and cosine waves when the motor rotates. However, the sine and cosine signals are distorted due to magnetic noise, which makes the angle error of the sensor, generated near by the Hall element. This paper defines an optimal design variables by using the Taguchi method to minimize output distortion of the magnetic sensor and permanent magnet. To enhance reliability of the magnetic position sensor from sensitivity error, assembly amplitude mismatch and the electrical angle, 3-Dimensional electromagnetic finite element method and correction algorithm errors were performed in due of the magnetic sensor in order to improve the quality of the initial production model.

• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.79-88
• /
• 1996

For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.219-222
• /
• 2002

In this paper, some parameters are studied for the performance improvement of a bulk optical magnetic-field sensor. The performance of optical magnetic-field sensor is influenced by optical intensity change and wavelength change of light source, and phase shift so called optical bias mismatch. A magnetic field measuring system based on optical Faraday sensor is implemented and tested in the current range from 10 ampere to 200 ampere. The test result shows implemented system has goof linearity.