• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1227-1233
• /
• 2010

가스터빈엔진 내의 블레이드에서는 표면에 외부의 찬 공기를 흘려주는 작은 냉각 홀들을 가공하고 열 차단 코팅시스템을 코팅하는 방법으로 기지금속을 고온에서 보호한다. 열 차단 코팅은 열피로 과정에서 산화막의 성장 및 접합층과 산화막의 열팽창계수의 불일치로 산화막내부에 잔류응력이 발생하며 궁극적으로 코팅층의 분리를 유발한다. 본 연구에서는 내열합금 시편 표면에 작은 홀을 가공하여 여러 가지 고온 유지 조건에서 열 및 기계적 피로 시험을 수행하여 홀 주위의 산화막의 변형을 관찰하였다. 실험결과 기계적 피로가 홀 주위의 산화막의 변형에 중요한 영향을 미치며, 동일한 산화막 두께에서 고온 유지 시간이 짧을수록 변형이 쉽게 발생 하였다. 또한 본 연구에서는 홀 주위 산화막의 응력해석을 위한 이론적인 연구도 시도되었다.

• 지구물리와물리탐사
• /
• 제12권1호
• /
• pp.99-104
• /
• 2009

본 연구에서는 천부 토양층의 2차원 불균질 S파 단면을 결정하기 위해 천부 굴절법 탐사로부터 얻은 SH파 자료에 대한 파형역산 기법을 제안한다. 2차원 매질에서 SH파의 전파를 모사하기 위해 2.5차원 파동 방정식을 사용한다. 합성탄성파를 계산하기 위해 공간축으로 4차, 시간축으로 2차 근사한 staggered grid 유한차분법을 사용하여 파동 방정식을 푼다. 계산된 파형과 측정 파형의 잔여오차로 정의되는 목적함수를 하이브리드 발견적 탐색기법에 의해 최소화한다. 2차원 지하구조 모형은 각기 다른 심도 경계면을 갖는 블록과 블록 내부의 S파 속도에 의해 매개화한다. 수치실험은 암영층파 불규칙한 경계를 갖는 모델에 대해 백색잡음을 추가한 합성 SH파 자료를 이용하여 수행하였다. 지표 굴절법 자료로부터 암영층을 포함한 구조를 적절한 계산시간 내에 영상화할 수 있었다

• 지구물리와물리탐사
• /
• 제18권1호
• /
• pp.9-13
• /
• 2015

전기비저항 탐사 자료는 다양한 잡음을 포함하고 있다. 즉 전기비저항 자료는 높은 접촉저항, 장비의 측정 오차 및 주변의 불규칙한 전기적 잡음에 의해 영향을 받는다. 전기비저항 탐사 자료의 올바른 해석을 위해서는 이들 잡음의 정확한 추정이 요구된다. 이 연구에서는 상반성 시험을 통하여 추정된 잡음을 역산시 자료 가중에 반영하는 방법론을 제안하였다. 또한 역산시 현장 자료와 이론 자료 사이의 적합 오차와 상반성 오차를 분석하고, 상반성 오차와 적합 오차를 모두 이용하는 자료 가중법을 제안하였다. 현장 자료에 제안된 자료 가중법을 적용한 결과 통상적인 역산 결과에 비하여 국지적 이상대의 출현 빈도가 감소하는 것을 확인할 수 있었다.

• 지구물리와물리탐사
• /
• 제21권3호
• /
• pp.139-149
• /
• 2018

전기비저항 모니터링은 지하 매질의 시간적 변화를 파악하기 위한 효과적인 물리탐사법이다. 전기비저항 모니터링은 최근 정교한 자동측정 장비와 통신기술의 발달에 힘입어 지하의 시공간적 물성변화의 탐지를 위하여 널리 사용되고 있다. 이 연구에서는 지하 매질의 의미있는 시공간적 변화대를 효과적으로 해석할 수 있는 4차원 역산 알고리듬을 개발하였다. 4차원 역산의 문제점인 시간축을 따른 지나친 평활화 제한 문제를 극복하기 위하여 자료오차에 대한 시공간 모델제한을 일정하게 유지하도록 라그랑지 곱수를 자동으로 조정하였다. 또한 강조 모델제한자를 도입하여 보다 선명하게 지하의 시공간 변화대를 영상화하고자 하였다. 시간경과 모델에 대한 수치자료에 대하여 개발된 4차원 역산을 수행하여 개발된 역산 알고리듬의 타당성을 검토하였다.

• 지구물리와물리탐사
• /
• 제17권2호
• /
• pp.95-103
• /
• 2014

MT 자료에서 3차원 전기비저항 구조와 정적효과를 동시에 구하기 위한 실용적인 역산법을 소개한다. 이 방법은 감도행렬이 필요한 Gauss-Newton법을 기반으로 하고 반복과정에서 Broyden의 방식으로 감도를 수정하는 것을 기본으로 하고 있다. 이 논문에서는 합성 MT 자료에 대한 역산실험을 통해 근사역산법의 성능과 정적효과에 대한 가중치에 대해 검토하였다. 해석적으로 구해지는 초기감도를 Broyden의 방식으로 수정하는 역산법은 초기감도를 끝까지 쓰는 역산법보다 자료오차를 줄이는데 효과적이었다. 그리고 완전한 감도행렬을 반복 중간에서 단 한번만 사용하는 근사역산법으로서는 반복 전반부에서 완전한 감도를 사용할 때 자료오차를 가장 많이 줄이는 것으로 나타났다. 정적효과에 대한 가중치는 어느 특정 한계값 이하로 선택하면 최종 자료오차에는 결정적인 영향을 주지 않는다. 합성 MT 자료에 대한 실험 결과 이 역산법은 정적효과가 포함된 MT 자료로부터 3차원 전기비저항 구조를 재현하는데 효과적임을 확인하였다.

• 한국주조공학회지
• /
• 제37권5호
• /
• pp.139-147
• /
• 2017

Microstructural evolution of cast Hastelloy X during thermal exposure has been investigated. OM, SEM, and TEM microscopy were carried out on the as-cast, the standard heat treated, and the thermally exposed conditions. Tensile tests were also conducted to understand the effect of microstructural evolution on the degradation of tensile properties. Coarse $M_6C$ and fine $M_{23}C_6$ carbides were found in as-cast Hastelloy X with fine carbides on sub-boundary. Some of $M_{23}C_6$ carbide dissolved into the matrix during solution heat treatment and dislocation network formed at the interface between the carbide and the matrix due to the misfit strain. There was no significant microstructural difference between the exposed specimens at $400^{\circ}C$ and the solution heat treated specimen. A large amount of $M_{23}C_6$ carbides precipitated along and near grain boundaries and sub-boundaries after exposure at $650^{\circ}C$. Exposure at $870^{\circ}C$ of the alloy caused precipitation of $M_6C$ and ${\mu}$. The strength increased and the elongation decreased by thermal exposure at $650^{\circ}C$ and $870^{\circ}C$ because carbides interfere with the movement of the dislocation. It was found that the precipitation of carbide gave significant effects on the tensile properties of Hastelloy X.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.105-111
• /
• 2019

PURPOSE. Limited data is available regarding the differences for possible microleakage problems and fitting accuracy of zirconia versus titanium abutments with various connection designs. The purpose of this in vitro study was to investigate the effect of connection design and abutment material on the sealing capability and fitting accuracy of abutments. MATERIALS AND METHODS. A total of 42 abutments with different connection designs [internal conical (IC), internal tri-channel (IT), and external hexagonal (EH)] and abutment materials [titanium (Ti) and zirconia (Zr)] were evaluated. The inner parts of implants were inoculated with $0.7{\mu}L$ of polymicrobial culture (P. gingivalis, T. forsythia, T. denticola and F. nucleatum) and connected with their respective abutments under sterile conditions. The penetration of bacteria into the surrounding media was assessed by the visual evaluation of turbidity at each time point and the number of colony forming units (CFUs) was counted. The marginal gap at the implant- abutment interface (IAI) was measured by scanning electron microscope. The data sets were statistically analyzed using Kruskal-Wallis followed by Mann-Whitney U tests with the Bonferroni-Holm correction (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the groups based on the results of leaked colonies (P<.05). The EH-Ti group characterized by an external hexagonal connection were less resistant to bacterial leakage than the groups EH-Zr, IT-Zr, IT-Ti, IC-Zr, and IC-Ti (P<.05). The marginal misfit (in ${\mu}m$) of the groups were in the range of 2.7-4.0 (IC-Zr), 1.8-5.3 (IC-Ti), 6.5-17.1 (IT-Zr), 5.4-12.0 (IT-Ti), 16.8-22.7 (EH-Zr), and 10.3-15.4 (EH-Ti). CONCLUSION. The sealing capability and marginal fit of abutments were affected by the type of abutment material and connection design.

• The Journal of Advanced Prosthodontics
• /
• 제11권5호
• /
• pp.280-285
• /
• 2019

PURPOSE. The present study was designed to examine the clinical fit of fixed dental prosthesis fabricated by the milling-sintering method using a presintered cobalt-chromium alloy. MATERIALS AND METHODS. Two single metal-ceramic crowns were fabricated via milling-sintering method and casting method in each of the twelve consecutive patients who required an implant-supported fixed prosthesis. In the milling-sintering method, the prosthetic coping was designed in computer software, and the design was converted to a non-precious alloy coping using milling and post-sintering process. In the casting method, the conventional manual fabrication process was applied. The absolute marginal discrepancy of the prostheses was evaluated intraorally using the triple-scan technique. Statistical analysis was conducted using Mann-Whitney U test (${\alpha}=.05$). RESULTS. Eight patients (66.7%) showed a lower marginal discrepancy of the prostheses made using the milling-sintering method than that of the prosthesis made by the casting method. Statistically, the misfit of the prosthesis fabricated using the milling-sintering method was not significantly different from that fabricated using the casting method (P=.782). There was no tendency between the amount of marginal discrepancy and the measurement point. CONCLUSION. The overall marginal fit of prosthesis fabricated by milling-sintering using a presintered alloy was comparable to that of the prosthesis fabricated by the conventional casting method in clinical use.

• 영어영문학
• /
• 제54권4호
• /
• pp.511-530
• /
• 2008

In "A Good Man Is Hard to Find," Flannery O'Connor describes a striking journey of a family, in which all the members dramatically get killed. Through the tragic death of Bailey's family, O'Connor evokes the reader to think about life and the life after death. Growing up in the communities of Catholicism and Protestantism, O'Connor herself had agonized with the same question between the two types of Christian belief throughout her life. In the story, O'Connor embodies her anguish with the major characters and questions the reader about the meaning of Christian salvation. More specifically, Bailey's family represent the people who get lost in life. They live without any direction and purpose. Red Sammy and his wife, on the other hand, provide travellers with rest, food, and the necessaries. The Tower is a shelter of travellers in life; however, it is not everlasting but temporary. The Misfit, exemplifying religious stragglers, has been completely frustrated with the variance of Christian salvation theories, and no longer practices the religion but knows enough to justify his cruel behaviors. Finally, the grandmother is the manipulator and opportunist of the religion. All those characters are fragments of human characters and their life - obscene and transitory. In the story, there is little God's grace on the surface even though the writer claims "all my stories are about the action of grace." Nonetheless, the reader should be able to identify with those characters because they are the mirror images of themselves. While visualizing the characters, O'Connor wants the reader to have a moment to think about the "Righteousness," and ultimately to seek out God's grace that she essentially wishes to show the reader. Instead of showing God's grace directly, O'Connor ultimately leads the reader to consider about God and the grace as she/he reads the work.

• 한국전문물리치료학회지
• /
• 제30권1호
• /
• pp.32-40
• /
• 2023

Background: Equating is a statistical procedure used to create a common measurement scale across two instruments. Item-level information should be taken into consideration so that scores can communicate interchangeably across the instruments. Objects: To investigate a common measurement scale across two health-related quality of life questionnaires (HRQOL) applied to various cancer survivors who underwent palliative care in healthcare institutions. Methods: A total of 139 cancer survivors who underwent palliative care were recruited from two rehabilitation hospitals and an oriental medicine hospital. Participants consisted of various cancer survivors who presented to the sites for palliative care. They were asked to fill out Korean versions of the World Health Organization Quality of Life (WHOQOL-BREF) and EuroQOL-5 dimension (EQ-5D) questionnaires following the palliative care. For the item level comparison, the Rasch rating scale model was used to investigate how participants regarded individual test items of two instruments in relation to item difficulty calibrations. Results: All items except the three items fit the Rasch model. One item (anxiety/depression) of the EQ-5D and two items (dependence on medical aids and negative feelings) of the WHOQOL-BREF are misfit. The WHOQOL-BREF targets the survivors well, while the EQ-5D is able to target the survivors with lower HRQOL levels with some ceiling effects. By inspecting the item difficulty calibrations of the two instruments, five items of the WHOQOL-BREF are selected as common items in relation to the EQ-5D. These five items are considered compatible with each other. Differential item functioning (DIF) analysis reveals that the healthcare item of the WHOQOL-BREF vs the self-care item of the EQ-5D exhibits significant DIF. Conclusion: Findings suggest that one paired item should be taken into consideration when equating the WHOQOL-BREF and the EQ-5D applied to cancer survivors who underwent palliative care.