• 한국진공학회지
• /
• 제5권1호
• /
• pp.33-38
• /
• 1996

The induced linewidth, frequency shift and absorption spectrum for a molecular dipole in the vicinity of a phase -conjugate mirror have been investgated within a classical phenomenological model, with particularreference to the technique of optical phase conjugation by a surface. While the shifts and the widths show similar characteristics as those obtained recently by Bochove who considered the problem within the context of four-wave mixing, the results obtained in the present model can be defined uniquely with the possibility of an infinite lifetime for the excited admolecule . Furthermore, the absorption lineshape obtained here some interesting features which depend on both the magnitude and the phase of the complex reflectivity of the mirror.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1055-1056
• /
• 2012

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.187-188
• /
• 2007

Four kinds of mirror substrates with same surface roughness were fabricated. On those substrates, a dielectric multi-layer coating with high reflectivity was deposited by ion beam sputtering technique. Most of the fused silica mirrors showed lower scattering than the ZERODUR mirrors one, which deposited on substrates similar in surface roughness. The ZERODUR mirrors scattering strongly depend on the micro-structure of $Ta_2O_5/SiO_2$ thin films wear deposited on ZERODUR substrates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.599-602
• /
• 2000

A new dressing technique with utilizes electrolytic phenomenon for realizing effective mirror surface grindings with metal bonded super-abrasive wheels is called “Electrolytic In-process Dressing Grinding”. This technique enabled metal bonded micro-grain wheels, such as micro-grain cast iron fiber bonded wheels, to be used for mirror surface finish processes effectively. But this technique requires a lot of knowledge and experience to perform. And the condition of dressing is variable according to the time. Therefore adaptation of Monitoring and Control technique is needed.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.21-28
• /
• 2008

Fizeau interferometer is used for inspecting the lens surface profile accurately. This study is focused on the design and optical measuring techniques for large optical components, such as a reflection mirror for large area lithography or astronomical purpose. A tower type Fizeau interferometer is designed and set up in horizontally with a 45$^{\circ}$ fold mirror which makes easy to align the optical path of heavy interferometer system. To align the optical path, a five-axes stage for the interferometer is required. This study shows a method of the 45$^{\circ}$ fold mirror alignment by using a three-axis stage instead of adjusting the interferometer itself or measuring object. This system will be installed on the large optics polishing machine during the manufacturing process as an on-machine inspection system.

• 한국광학회지
• /
• 제18권6호
• /
• pp.452-460
• /
• 2007

ZERODUR와 용융 석영으로 저산란 반사경을 제작하고 산란 특성을 연구하였다. Bowl feed 법을 이용하여 초연마면인 표면거칠기 0.326 ${\AA}$인 용융 석영 기판과 표면거칠기 0.292 ${\AA}$의 ZERODUR 기판을 얻었다. 이온빔 스퍼터링 방법으로 초연마된 기판 위에 $SiO_2$와 $Ta_2O_5$를 교번으로 22층을 증착하여 다층박막 고반사 거울을 얻었다. 용융 석영 반사경과 ZERODUR 반사경의 산란이 각각 4.6 ppm과 30.9 ppm으로 측정되었으며, 이로부터 산란이 매우 작은 경우 기판의 표면거칠기가 산란을 결정하는 주요 파라미터가 아니라는 것을 알았다. 나아가 반사경의 표면거칠기를 AFM으로 측정한 결과. ZERODUR 반사경이 용융 석영 반사경 보다 박막의 표면거칠기가 2.3배 더 높게 측정 되었다. 이 결과는 기판-박막 경계면에서 박막 형성 초기에 기판의 화학조성 또는 결정방향과 증착물질의 상호관계로 인하여 박막 형성 초기에 표면거칠기가 급격히 나빠져서 발생하는 것으로 유추되었다. SEO 300A으로 접촉각 측정을 하여 Giriflaco-Good-Fowkees-Young 방법으로 표면에너지를 계산하였다. 표면거칠기 0.46 ${\AA}$을 갖는 용융 석영 기판이 표면거칠기 0.31 ${\AA}$을 갖는 ZERODUR 기판보다 접촉각이 더 작고 표면에너지는 크게 나타났다. 이러한 차이가 기판 종류에 따라 박막형성 초기에 표면거칠기를 다르게 하는 한 요인으로 판단되며, 기판의 표면에너지가 높을수록 미려한 박막표면을 얻는 것으로 확인되었다. ZERODUR의 표면에너지 차이를 설명하기 위해 XPS 분석으로 용융 석영은 Si, O로 구성되었고 ZERODUR는 Si, O, Al, Na 그리고 F로 구성되었다는 것을 알 수 있었다.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.76-81
• /
• 2014

The Engineering ceramics have some excellent properties as materials for modern mechanical and electrical components. It is, however, not easy to polish them efficiently because they are strong and hard. This study is carried out to obtain a mirror surface on engineering ceramics by surperfinishing with high efficiency. To achieve this, we conducted a series of polishing experiments using representative engineering ceramics, such as $Al_2O_3$, SiC, $Si_3N_4$ and $ZrO_2$, using diamond abrasive film from the perspective of oscillations peed, the rotational speed of the workpiece, contact roller hardness, contact pressure and feed rate. Furthermore, the polishing efficiency and characteristics for engineering ceramics are discussed on the basis of optimal polishing time and surface roughness. Our results confirmed that efficient superfinishing conditions and polishing characteristics of engineering ceramics can be determined.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.178-183
• /
• 2009

At the time that the Keck-I 10m telescope was constructed in 1993, the era of Very Large Telescopes (VLTs) was opened. Now thirteen VLTs are in operation, and the largest of the monolithic mirrors is 8.4 m in diameter. Such monolithic mirrors are mostly aspheric and require high accuracies on the surface figures, reaching up to the diffraction limit. At present, next generation telescopes, Giant telescopes, are being developed. One is the GMT (Giant Magellan Telescope) whose size is 25.4 m in diameter. The primary mirror consists of seven segments figuring elliptical shapes on the surface. The surrounding six segments are off-axis and the edges are steep, as the fast focal ratio is adopted. It means that testing of the mirrors is a challenging task. In this paper, testing methods for the GMT primary mirror are reviewed, and accuracy of measuring devices is assessed. Results and discussions follow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.920-925
• /
• 2001

A study on the topology optimization of a multi-spectral camera for space-use is presented. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, under the self-weight loading is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criterion method using the sensitivities of the objective function and the constraint. As a preliminary example, topology optimization considering a self-weight loading is treated. For practical use, the polishing pressure is included as a loading in the topology optimization of the primary mirror. Results of the optimized design topology for the primary mirror with varying mass ratios are presented.