• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.795-801
• /
• 2005

This paper focuses on planning strategies for object interception by the robotic manipulator on a conveyor system in minimum time. The goal is that the robot is able to intercept object with minimum time on a conveyor line that moves at a given speed. The search algorithm for minimum time solution is given in detail for all possible cases for initial locations of robot. Simulations results show the validity of the given algorithm.

• 설비공학논문집
• /
• 제10권2호
• /
• pp.173-179
• /
• 1998

An experimental study was conducted on the effect of compressor capacity control range of heat pump on the seasonal energy efficiency ratio with variation of the maximum and minimum compressor input frequencies. To obtain seasonal energy efficiency ratio, steady state test at the maximum, minimum and intermediate compressor speed and cyclic test at the minimum compressor speed should be conducted. Maximum input frequency was varied to 95Hz, 105Hz, and 115Hz, and the minimum input frequency was varied to 35Hz, 45Hz, and 55Hz. The seasonal energy efficiency ratio increased as the input frequency of the compressor decreased. The maximum input frequency had only slight effects on the SEER.

• 한국산업정보학회논문지
• /
• 제18권6호
• /
• pp.61-70
• /
• 2013

본 논문에서는 ITS(Intelligent Transport System)인 VANET 환경에서 사고발생 시에 차량 속도와 방위각을 이용하여 경로 단절을 최소화시키면서 응급메시지를 신속하고 정확하게 전송할 수 있는 SARPE(Speed and Azimuth based Routing Protocol for Emergency) 시스템을 제안한다. SARPE 시스템은 다중 경로 탐색 및 경로 선정 작업 시에 불필요한 메시지 및 작업량을 최소화하기 위하여 방위각을 기반으로 경로 탐색을 수행하고, 근원지와 목적지 차량의 평균 속도와 탐색한 경로 내 차량 속도(최대속도, 최소속도)의 차를 이용하여 경로 단절 발생 확률이 적은 경로를 선택한다. 그 결과, 경로 단절로 인해 생기는 경로 재탐색 작업을 최소화하며, 응급메시지를 신속하고 정확하게 전송할 수 있다.

• 한국ITS학회 논문지
• /
• 제15권5호
• /
• pp.54-61
• /
• 2016

본 연구는 차량-보행자 사고시 보행자의 신장에 따라 보행자의 두부가 승용차의 전면유리에 닿을 수 있는 최저 속도를 제시하기 위하여 수행되었다. 마디모(MADYMO) 프로그램을 사용하여, NF쏘나타 차량에 대하여 보행자의 신장을 160cm, 170cm 180cm로 구분하여 평가하였다. 평가 결과, 승용차의 최저 속도값은 보행자의 신장이 160cm인 경우 약 49km/h, 170cm일 때 약 41km/h, 그리고 180cm일 때 약 29km/h로 나타났다. 이러한 값은 승용차 대 보행자 교통사고에서 승용차의 전면유리에 보행자 두부의 충돌흔적이 있을 시 속도추정의 중요 자료로 활용할 수 있을 것으로 기대된다.

• 한국공간정보시스템학회 논문지
• /
• 제10권2호
• /
• pp.35-48
• /
• 2008

이 논문에서는 단말기 기반 시스템에서 경로를 탐색할 때 탐색비용을 줄이고, 경로탐색의 질을 높이기 위해 동적 휴리스틱을 제안한다. 동적 휴리스틱이란 고정된 정보가 아닌 서버로부터 지속적으로 전송받는 휴리스틱으로, 교통정보를 계산한 데이터이다. 서버 기반의 경로탐색 서비스는 서버에서 경로를 탐색하여 결과를 클라이언트에 제공하지만, 제안하는 방법은 휴리스틱 정보만을 클라이언트에 전송하고 이를 활용하여 경로탐색을 하게 된다. 이 논문에서는 제안하는 동적 휴리스틱을 적용하기 위해 새로운 알고리즘을 제안한다. 제안하는 동적 휴리스틱은 지도를 그리드로 나누고, 각 그리드는 구역내 간선들의 최저속도 정보를 가진다. 그리드의 최저속도가 기준치에 미달되면 해당 그리드를 제거하고 경로를 탐색한다.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.53-60
• /
• 2014

This paper proposes a control scheme to reduce the power consumption of a variable displacement swash-plate type piston pump supplying oil to a valve-controlled hydraulic cylinder at constant pressure. Whenever flow rate demand was absent, the swash plate angle and the pump speed were changed to the minimum values required to compensate for the internal leakage flow. In response to command signals, the pump speed was changed in proportion to the absolute mean value of the speed component for position commands. At the same time, a pressure regulator was activated to maintain constant system pressure by precisely adjusting the pump speed with the swash plate angle fixed at the maximum. The conventional system consisting of a pressure-compensated variable displacement type pump is driven at a constant speed of 1,800rpm. By comparison, computer simulation and experimental results showed that idling power at stand-by status could be reduced by up to 70% by reducing the pump speed from 1,800rpm to 300rpm and the swash plate angle to the minimum.

• 대한안전경영과학회지
• /
• 제24권3호
• /
• pp.23-28
• /
• 2022

Rack is a place to store products. Workers pick products from rack storage. After picking up, workers move to another location by forklift. Driving speed, worker condition, and number/frequency of operation is responsible for forklift accidents. When an accident occurs, products get damaged. Therefore, it is important to prevent one. As the research result, To prevent forklift accidents, the minimum order quantity, the minimum number of operations, and low speed operation are required.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.274-282
• /
• 2015

This research is the result on calculating the logical speed limit through certain process which some elements must be considered on selecting the speed limit of harbour and waterway. The suggested speed limit select model on this research is processed from 1~6 steps by forming a professional group of experts. Each step has its information which 1st step(water division), 2nd step(selecting the model vessel and vessel applied with speed limit.), 3rd step(selecting the maximum and minimum speed range on each section), 4th step(evaluation on the safeness of traffic), 5th step(suggesting the appropriate speed limit), 6th step(execution and evaluation.). The appropriate speed limit was decided on consideration of the safety of maritime traffic on the range of the maximum speed and the minimum speed. This model was used to derive the appropriate speed limit on the harbour water and Busan harbour entrance waterway. As the result, the harbour water was calculated to be 6.9 knots, the appropriate speed limit of Busan entrance harbour was 9.3 knots. The present calculation of the speed limit on the approaching channel area is 10 knots, inner harbour area is 7 knots, which are similar to the result of the speed limit. This research is the first research on selecting the speed limit model and has its limits on finding the perfect speed limit result. More detailed standards on the safeness of traffic evaluation must be found and additional study is necessary on discriminating consideration of the elements. This research has its value which it provides instances of aboard cases on guidelines of selecting the speed limit.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.247-252
• /
• 2000

본 논문은 국내 5GHz 대역에서 초고속 무선접속 망을 위한 주파수의 분배 및 공유조건에 관한 것이다. 본 논문에서는 초고속 무선접속 망과 기존 기상 레이더 사이의 공유 가능성을 평가하기 위해서 최소결합손실(Minimum Coupling Loss) 방법과 Monte-Carlo 시뮬레이션을 이용하여 기상 레이더가 초고속 무선 접속용 기기에 미치는 전파간섭을 분석하였다. 그리고 실험 결과에 의하면 기상레이더와 초고속 무선접속 망의 주파수 공유를 위해서는 DFS(Dynamic Frequency Selection) 기법을 사용하는 것이 필수적이다.

• Journal of Information Processing Systems
• /
• 제6권3호
• /
• pp.403-412
• /
• 2010

Multi-Relay Networks should accommodate mobile users of various speeds. The cellular system should meet the minimum residency time requirements for handover calls while considering an efficient use of available channels. In this paper, we design speed-sensitive handover under dynamic hierarchical cellular systems, in which mobile users are classified according to the mean speed of mobile users and each class has its cellular layer. In order to meet the minimum residency time, the cell size of each cellular layer is dynamically determined depending on the distributions of mean speeds of mobile users. Since the speed-dependent non-preferred cell can provide a secondary resource, overflow and take-back schemes are adopted in the system. We develop analytical models to study the performance of the proposed system, and show that the optimal cell size improves the blocking probability.