• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1115-1124
• /
• 2022

The impact of climate change on water resources was evaluated for Chungju Dam and Soyang-gang Dam basins by constructing an integrated modeling framework consisting of a dam inflow prediction model based on the Variable Infiltration Capacity (VIC) model, a distributed hydrologic model, and an LSTM based dam outflow prediction model. Considering the uncertainty of future climate data, four models of CMIP6 GCM were used as input data of VIC model for future period (2021-2100). As a result of applying future climate data, the average inflow for period increased as the future progressed, and the inflow in the far future (2070-2100) increased by up to 22% compared to that of the observation period (1986-2020). The minimum value of dam discharge lasting 4~50 days was significantly lower than the observed value. This indicates that droughts may occur over a longer period than observed in the past, meaning that citizens of Seoul metropolitan areas may experience severe water shortages due to future droughts. In addition, compared to the near and middle futures, the change in water storage has occurred rapidly in the far future, suggesting that the difficulties of water resource management may increase.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.33-48
• /
• 1992

Since November 1990, the observations of methane (CH4) level have been carried out at Tae-ahn Peninsula (TAP) in Korea. Analysis on atmospheric data obtained in the period from November 1990 to August 1992 is carried out and the results are included in this study. We 임ole that CIL does not have a clear seasonal cycle with a minor maximum in August- september and with a minimum in June-July. The variations in monthly average level are much larger with 1765.01∼ 1857.21 pub (amplitude 92.20 ppb). The occurrence of a minimum in June-July is due to the inflow of the North Pacific air, an increase of OH radical and due to a decrease in CH4 emission from rice paddy. A maximum in August and September appears to result from an increase in organic materials in agriculture (rice paddy) and forests, inputs of local sources due to weak airflows, stagnation of the warm and moist air and from a decrease in OH radical.'rho present analysis indicates that according to CH4 data from Mongolia and from several sites in North Pacific TAP is influenced as much as 31 pub in average from the inputs of Chinese omission. When the atmospheric CH4 of TAP is compared with data observed at Korea National University of Education (KNU), the values of KNU are higher (127 ppb) than those of TAP. It is clear that air samples taken at KNU are influenced strongly by local sources in central Korea than those at TAP. According to analysis of trajectories and airflows, we find that there are 4 types in classification. Firstly, when an air flow is originated mainly in China values of CH4 gas are in medium ranges. Secondly, when an airflow is from both local (Korea) and China we find higher values. Thirdly, with an airflow from both local (Korea) and Japan origins medium values are recorded. Fourths)r, when an airflow of maritime origin arrives low values of atmospheric CH4 are observed at TAP.

• Water for future
• /
• v.35 no.5
• /
• pp.21-30
• /
• 2002

The inflow into a multi-purpose dam reservoir contains many suspended solids from the upper stream during the rainy season. Concentrations of SS increased to 73.3 mg/l and the TP measurement increased to 0.09 mg/l during the rainy season in 1999. It was discovered that particles less than $10\;\mu\textrm{m}$ in size composed about 50% of the total amount. Some of these particles reduce the reservoir capacity and have an impact on water. In this study, the sediment depth at Daecheong multi-purpose dam was examined. Piston coring was performed at 9 locations At Hoenam 1 out of 9 locations examined showed maximum depth, which was 90 cm and at Muneui 3 showed the minimum depth, which was 35 cm. At Hoenam, the release rate of TN was found to be $62.14~84.72\;mg/\textrm{m}^2{\cdot}day$ in 1998. However, it was found to considerably reduced to $23.20\;mg/\textrm{m}^2{\cdot}day$ in 2001. The release rate of TP was measured at $13.02~14.38\;mg/\textrm{m}^2$.day at 1998, and it was reduced to $6.93mg/\;mg/\textrm{m}^2{\cdot}day$ in 2001.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.4
• /
• pp.477-490
• /
• 2018

Effects of inflow Reynolds number (Re), turbulence intensity (I) and pressure gradient on the transition flow over a blade section were studied using the ${\gamma}-Re{\theta}$ transition model (STAR-CCM+). Results show that the $Re_T$ (transition Re) at the transition location ($P_T$) varies strongly with Re, I and the magnitude of pressure gradient. The $Re_T$ increases significantly with the increase of the magnitude of favorable pressure gradient. It demonstrates that the $Re_T$ on different blade sections of a rotating propeller are different. More importantly, when there is strong adverse pressure gradient, the $P_T$ is always close to the minimum pressure point. Based on these conclusions, the $P_T$ on model propeller blade surface can be estimated. Numerical investigations of pressure distribution and transition flow on a propeller blade section prove these findings. Last, a simple method was proposed to estimate the $P_T$ only based on the propeller geometry and the advance coefficient.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.256-262
• /
• 2017

Molten zinc plating is a process in which zinc is thinly coated over a metallic or non-metallic surface. It is used in various industrial fields for corrosion resistance and decoration. During the process, a steel sheet is passed through a roll that rotates inside the molten zinc liquid in the temperature range of $460^{\circ}C$ to $680^{\circ}C$, and the plating liquid flows into the roll causing abrasion and erosion of the roll surface. This problem is known to accelerate the replacement cycle of the roll and cause considerable economic loss owing to production line stoppage. Here, we propose a mechanism that operates at high temperature and pressure with a labyrinth type seal design to resolve this problem. We theoretically investigate the flow of the plating solution inside the seal and compute the minimum rotation speed required to prevent the plating solution from entering the seal chamber. In addition, we calculate the thermal deformation of the seal during operation and display thermally deformed dimensions at high temperatures. To verify the theoretical results, we perform experiments using pilot test equipment working in the actual plating environment. The experimental results are in good agreement with theoretical results. We expect our results to contribute towards the extension of the roll's life span and thereby reduce the economic losses.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.3
• /
• pp.176-185
• /
• 1991

Pressure drop and flow characteristics through a filter medium have been investigated numerically. A basic model similar to the filter employed in a hard disk drive was established so that the inflow velocity was 0.1 m/s and the box size was $40mm{\times}50mm{\times}30mm$. The filter medium specifications were 0.38mm of thickness, $1{\mu}m$ of fiber diameter, 0.05 of packing density. And the filter medium was pleated by 10 within the filter box. Twenty-one sets of calculation were performed with different inlet velocities, pleated numbers, and packing densities from the basic model. As the result, it was found that the velocity after filter medium had maximum value at the rear of the upstream pleated line, but had minimum value at the rear of the downstream pleated line. This made the velocity distribution have sinusoidal form immediately after the filter medium. As the inlet velocity increased, the pressure drop increased linearly. But as the packing density increased the pressure drop increased quadratically.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.4
• /
• pp.59-69
• /
• 1999

This study examines the existing theories related to detention basin and embodies the calculation process of sediment basin. It investigated the scale of sediment basin by actual measurement at Buju Mountain, Mokpo city which causes the environmental problems like erosion and outflow of sediment due to the excessive development, finds the problems of existing sediment basin by applying and analyzing the physical factors which affect the execution of sediment basin using GIS as the method establishing the scale of sediment basin embodied in this study and then suggests the oteimum scale. Comparing the surface area of the existing sediment basin and of the required one, all of the surface areas of the existing sediment basins were smaller than those of the required one. Therefore, it can be expected that the trap efficient of sediment will be declined. The required one. Therefore, it can be expected that the trap efficient of sediment will be declined. The required minimum depth was fully satisfied, but it is analyzed that the volume of sediment basin will affect the neighboring environment because it can not accomodate the inflow discharge volume except sediment basin C. It is consistent with the actual situation which causes a serious environmental problem due to the overflow of sediment basin during the heavy storm event except sediment basin C and also it verifies the validity of calculation process of establishing optimum sediment basin suggested in this study.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2009

The optimum design of back pressure chamber is one of the most important factors in designing scroll compressors because it has a great influence on the efficiency and other design parameters. The design process can be divided into 2 parts. One is obtaining the optimum pressure of the chamber and keeping it in constant value. The other is finding out the minimum inflow rate of medium with which back pressure chamber is filled. In this study we are focused on the first step. At first we added a simple structure that can change back pressure without reassembling compressor. It makes possible to obtaining optimum back pressure. Then we designed an equipment that the back pressure control valve assembly could be independently tested with. Spring was redesigned to decrease stiffness variation. Also sealing mechanism of back pressure control valve was improved to more effective way. As a result, it was verified that in a real mode test back pressure variation could be retained in 2.3% with discharge pressure and operating frequency varied. In addition the integrated structure of back pressure control valve is expected to contribute to effective manufacturing process.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.410-415
• /
• 2007

The optimization of back pressure chamber is one of the most important factors in designing scroll compressors, because it has a great influence on the efficiencies and other design parameters. The design process can be divided into 2 parts. One is obtaining the optimum pressure of the chamber and keeping it in constant value. And the other is finding out the minimum inflow rate of medium with which back pressure chamber is filled. In this study we are focused on the first step. At first we added a simple structure that could change back pressure without reassembling compressor. It makes the optimum back pressure be obtained. And then we devised an equipment that the back pressure control valve assembly could be independently tested with. A spring was redesigned to decrease stiffness variation. And sealing mechanism of back pressure control valve was improved to more effective way. As a result it was verified in a real mode test that back pressure variation could be stabilized within 2.3% when discharge pressure and operating frequency varied. And the integrated structure of back pressure control valve is expected to contribute to an effective manufacturing process.

• Korean Journal of Ecology and Environment
• /
• v.35 no.1 s.97
• /
• pp.36-44
• /
• 2002

The spatial and temporal trends of water qualities in Lake Soyang was statistically analyzed in this study. The water qualities include nutrients, ionic contents and chlorophyll-a (Chl-a) measured during 1993${\sim}$2000. The rainfall intensity and runoff from the catchment appeared to play an important role in water quality trends in the lake. According to seasonal Mann-Kendall test, conductivity, TP, and Ctl-a did not show any trends of increase or decrease over the 8 year period, while TN declined slightly. It was found that the variation of TP was a function of interannual inflow and rainfall. In the analyses of spatial trend, conductivity, based on the mean by site, showed a downlake decline over the eight year period. Minimum conductivity was found in the headwaters during summer monsoon of July to August and near the dam during October. This result indicates a time-lag phenomenon that the headwater is diluted by rainwater immediately after summer monsoon rain and then the lake water near the dam is completely diluted in October. During summer period, TP and TN had an inverse relation with conductivity values. Concentrations of TP peaked during July to September in the headwaters and during September in the downlake. Also, TN increase during the summer and was more than 1.5 mg/L regardless of season and location, indicating a consistent eutrophic state. Values of Chl-a varied depending on location and season, but peaked in the midlake rather than in the headwaters during the monsoon. Regression analyses of log-transformed seasonal Chl-a against TP showed that value of $R^2$ was below 0.003 in the premonsoon and monsoon seasons but was 0.82 during the postmonsoon, indicating a greater algal response to the phosphorus during the postmonsoon. In contrast, TN had no any relations with Chl-a during all seasons.