• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.77-86
• /
• 2019

The present study focuses on the effect of staggered integration factor (SIF) on Morton effect simulation results. The Morton effect is a synchronous rotordynamic instability problem caused by the temperature differential across the journal in fluid film bearings. Convection and conduction of heat in the thin film displaces the hot spot, which is the hottest circumferential position in the thin film, from -20 to 40 degrees ahead of the high spot, where the minimum film clearance is experienced. The temperature differential across the journal causes a bending moment and the corresponding thermal bow in the rotating frame acts like a distributed synchronous excitation in the fixed frame. This thermal bow may cause increased vibrations and continued growth of the synchronous orbit into a limit cycle. The SIF is developed assuming that the response of the rotor-lubricant-bearing dynamic system is much quicker than that of the bearing-journal thermal system, and it is defined as the ratio between the simulation time of the thermal system and the rotor-spinning period. The use of the SIF is unavoidable for efficient computing. The value of the SIF is chosen empirically by the software users as a value between 100 and 400. However, the effect of the SIF on Morton effect simulation results has not been investigated. This research produces simulation results with different values of SIF.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.3
• /
• pp.255-269
• /
• 2023

Surface water temperature of a bay (from the south to the north) increases in spring and summer, but decreases in autumn and winter. Due to shallow water depth, freshwater outflow, and weak current, the water temperature in the central to northern part of the bay is greatly affected by the land coast and air temperature, with large fluctuations. Water temperature variations are large in the north-east coast of the bay, but small in the south-west coast. The difference between water temperature and air temperature is greater in winter and in the south-central part of the bay than that in the north to the eastern coast of the bay where sea dykes are located. As the bay goes from south to north, the range of water temperature fluctuation and the phase show increases. When fresh water is released from the sea dike, the surrounding water temperature decreases and then rises, or rises and then falls. The first mode of empirical orthogonal function (EOF) represents seasonal variation of water temperature. The second mode represents the variability of water temperature gradient in east-west and north-south directions of the bay. In the first mode, the maximum and the minimum are shown in autumn and summer, respectively, consistent with seasonal distribution of surface water temperature variance. In the second mode, phases of the coast of Seosan~Boryeong and the east coast of Anmyeon Island are opposite to each other, bordering the center of the deep bay. Periodic fluctuation of the first mode time coefficient dominates in the one-day and half-day cycle. Its daily fluctuation pattern is similar to air temperature variation. Sea conditions and topographical characteristics excluding air temperature are factors contributing to the variation of the second mode time coefficient.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.293-301
• /
• 2010

Optical fiber cable, as a sensor, was installed on the wall of KAERI(Korea Atomic Energy Research Institute) Underground Research Tunnel(KURT) in order to monitor the physical stability of the tunnel, which was constructed for technical development and demonstration of radioactive waste disposal. This monitoring system has two simultaneous measurements of temperature and strain over time using Brillouin backscatter. According to the results of the monitoring from Jan. 2008 to Nov. 2009, there is no significant displacement or movement at the tunnel wall However, the cumulative volume of total strain increased slightly as time passes with the comparison of the reference observation, which was measured in Jan. 2008. The change in cumulative volume of total strain indicates that the strain level had been affected by saturation and de-saturation phenomena due to groundwater fluctuation at several points at KURT. This system is based on the distributed sensing technique concept, not point sensing. By using this system, a displacement can be detected with the range from $20{\mu}{\varepsilon}$ to $28,000{\mu}{\varepsilon}$ every 1m interval in minimum. A temperature variation can be monitored at every 0.5m interval with the resolution of 0.01 in minimum. Based on the study, this monitoring system is potentially applicable to long term monitoring systems for radioactive waste disposal project as well as other structures and underground openings.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.27-34
• /
• 2000

The chloroform and methanol (2;1, v/v) extract from an edible plant, Actinidia arguta Planchon, appeared to possess antitumor activity against human leukemias Jurkat T and U937 cells through inducing apoptosis. The substance in the solvent extract was purified by silica gel column chromatography, preparative TLC, and Sephadex LH-20 column chromatography. Characteristics of the substance analyzed by UV scanning analysis, $^1H$ and $^{13}C$ NMR spectra suggested that the substance belongs to the chlorophyll derivatives-like group. The $IC_{50}$ value of the chlorophyll derivative (Cp-D) determined by MTT assay was $15\mu\textrm{g}/ml$ for Jurkat, $10\mu\textrm{g}/ml$ for U937, and $11.4\mu\textrm{g}/ml$ for HL-60m and was more toxic to these leukemias than to solid tumors or normal fibroblast. In order to elucidate cellular mechanisms underlying the cytotoxicity, the effect of the Cp-D on Jurkat T cells was investigated. When cells were treated with the Cp-D at a concentration of $15\mu\textrm{g}/ml$, [3H]thymidine incorporation declined rapidly and wa undetectable in 1h. However, no significant changes were made in the cell cycle distribution of the cells by 24h. The sub-Gl peak representing apoptotic cells began to be detectable in 36h, at which time apoptotic DNA fragmentation was also detected on agarose gel electrophoresis, demonstrating that the cytotoxic effect of the Cp-D is attributable to the induced apoptosis. Under the same conditions, although the protein level of cyclin-dependent kinases such as cdc4, csk6, cdk2, and cdc2 was not significantly changed until 24h, the kinase activity of all c안 rapidly declined and reached a minimum level within 1-6h and then recovered to the initial level by 12h and sustained until 24h. These results suggest that inactivation of cdks at an inappropriate time during the cell cycle progression in jurkat T cells following a treatment with the Cp-D leads to induction of apoptotic cell death.

• Korean Journal of Microbiology
• /
• v.43 no.4
• /
• pp.264-272
• /
• 2007

For the detection of human immunodeficiency virus (HIV), ultra-rapid real-time PCR methods were developed. The target DNA sequences were used 495 bp HIV-1-specific env gene (gi_1184090) and 294 bp HIV-2-specific env gene (gi_1332355). Ultra-rapid real-time PCR was peformed by $Genspector^{TM}$ (Samsung, Korea) using microchip-based, $6\;{\mu}l$ of reaction volume with extremely short running time in only 2 steps (denaturation, annealing/extension) in each cycle of PCR. Total reaction for 30 cycled ultra-rapid PCR detection including melting temperature analysis was completed in 7 min and 30 sec. The HIV-1-specific 117 bp-long or HIV-2-spe-cific 119 bp-long PCR products were successfully amplified from the minimum of template, $2.3{\times}10^3$ copies of each euv gene using 30 cycled two-steps ultra-rapid PCR. This kind of ultra-rapid real-time PCR method would be useful not only for the rapid-detection of HIV, but also rapid-detection of other pathogens.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.23 no.1
• /
• pp.33-42
• /
• 2012

Background and Objectives : Dysarthria refers to speech disorder that causes difficulties in speech communication due to paralysis, muscle weakening, and incoordination of speech muscle mechanism caused by damaged central or peripheral nerve system. Pitch, strength and speed are influenced by dysarthria during detonation due to difficulties in muscle control. As evaluation items, alternate motion rate and diadochokinesis have been commonly used, and articulation is also an important evaluation items. The purpose of this study is to find acoustic characteristics on sound production of dysarthria patients. Materials and Methods : Research subjects have been selected as 20 dysarthria patients and 20 subjects for control group, and voice sample was composed of bilabial, alveolar sound, and velar sound in diadochokinetic rate, while consonant articulation test was composed of bilabial plosive, alveolar plosive, velar plosive. Analysis items were composed of 1) speaking rate, energy, articulation time of diadochokinesis, 2) voice onset time (VOT), total duration (TD), vowel duration (VD), hold of plosives. Results and Conclusions : The number of diadochokinetic rate of dysarthria was smaller than control group. Both control group and dysarthria group was highly presented in the order of /t/>/p/>/k/. Minimum energy range per cycle during diadochokinetic rate of dysarthria group was smaller than control group, and presented statistical significance in /p/, /k/, /ptk/. Maximum energy range was larger than control group, and presented statistical significance in /t/, /ptk/. Articulation time, gap, total articulation time during diadochokinetic rate of dysarthria group was longer than control group and presented statistical significance. The articulation time was presented in both control group and dysarthria group in the order of /k/>/t/>/p/, while Gap was presented in the order of /p/>/t/>/k/ for control group and /p/>/k/>/t/ for dysarthria group. VOT, TD, VD regarding plosives of dysarthria group were longer than control group. Hold showed large deviation compared to control group that had appeared due to declined larynx and articulation organ motility.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.1-9
• /
• 2007

Walking is not only an essential component of the human mobility, but also is a good exercise. Inability to walk freely can reduce an individual's quality of life and independence substantially. Being a relatively low impact activity, walking is particularly good for the elderly and research has shown that regular walking in the elderly reduces the chance of fall-related injuries and mental diseases as well. In spite of the documented benefits of regular walking, it is still difficult to walk without the aid of assistive devices for the frail elderly who have lower extremity problems. Assistive walking devices(AWD), such as crutches, canes, hiking-poles, T-Poles and walkers, are often prescribed to the elderly to make their walking be safe and efficient. Many researchers have demonstrated the effects of AWDs such as reducing lower extremity loading, improved dynamic/gait stability, yet, no study has been done for gait pattern when the elderly gait with AWDs. Therefore, the purpose of this study was to examine whether T-Poles, one of the AWDs, change the elderly gait pattern. Eight community-dwelling female elderly participated in this study. Laboratory kinematics during walking with T-Poles(PW) and with out T-Poles(NPW) was assessed. PW showed significant increase in step width, stride length, gait velocity and decrease in swing time. No significances were found in lower body joint angles but meaningful trend and pattern were found. Maybe the reason was due to the participants. Our participants were healthy enough so that the effect of T-Poles was minimum. PW also showed typical gait phases which are no single support phase during a gait cycle. It indicates that walking with T-Poles may guarantee safe and confident walking to the frail elderly.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.77-82
• /
• 2010

This study evaluated the characteristics and reliability of an auger crane with a built-in hydraulic extender. The field test of the hydraulic extender was performed with the hydraulic lines filled with hydraulic fluid and free of air. The pressure generated during the test was measured with a digital pressure gauge. The crane was considered to have undergone one cycle of the excavation process after it had performed excavation under three conditions at the same location. This process was performed three times in total. From the results of the excavation using the hydraulic extender, it was found that the maximum pressure and torque measured were 19.9 [MPa] and 895.4 [$kgf{\cdot}m$], respectively. The rotation force of the auger crane generated at this time signifies a horizontal force. If the excavation diameter of the auger crane is increased, the rotation speed is reduced causing the circumferential speed to also be reduced. The torsional shear stress of the extendable auger crane was calculated to be approximately 23.5 [MPa]. However, the rotation shaft material used for this system was carbon steel for machine structural use (SM45C). Since the minimum torsional yield stress is greater than 150 [MPa] according to KS D 3752, it means the equipment has secured a safety factor greater than 6. Therefore, it was found that when performing work using the extendable auger crane, it exhibited no problems with the safety and reliability of its shaft.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.197-210
• /
• 2005

Results of 7 nights of CCD VR photometry of the intermediate polar 1RXS J062518.2+733433 obtained at the Korean 1.8m telescope are reported. The corrected ephemeris for the orbital minimum is BJD (Orb.min) = 2453023.6159(42)+0.1966431(33) (E-1735). The corrected ephemeris for the spin maximum is BJD (spin max) = 2452893 78477 (10)+0.01374116815 (17) (E-15382) (cycle numbering corresponds to that of Staude et al.2003). The variations of the shape of the individual spin variations are highly correlated in V and R. The phase of the spin maximum is found to be dependent on the orbital phase. The corresponding semi-amplitude of sinusoidal variations of phase is $0.11{\pm}0.03.$ This new phenomenon is explained by the changing viewing conditions of the accreting magnetic white dwarf, and should be checked in further observations this star and for other intermediate polars. To avoid influence of this effect on the analysis of the long-term spin period variations, the runs of at least one orbital period are recommended. Results of time series analysis are presented in tables.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.26-35
• /
• 2007

The vehicle of urban transit is a complex system that consists of various electric, electronic, and mechanical equipments, and the maintenance cost of this complex and large-scale system generally occupies sixty percent of the LCC (Life Cycle Cost). For reasonable establishing of maintenance strategies, safety security and cost limitation must be considered at the same time. The concept of system reliability has been introduced and optimized as the key of reasonable maintenance strategies. For optimization, three preceding studies were accomplished; standardizing a maintenance classification, constructing RBD (Reliability Block Diagram) of VVVF (Variable Voltage Variable Frequency) urban transit, and developing a web based reliability evaluation system. Historical maintenance data in terms of reliability index can be derived from the web based reliability evaluation system. In this paper, we propose applying inverse problem analysis method and hybrid neuro-genetic algorithm to system reliability optimization for using historical maintenance data in database of web based system. Feed-forward multi-layer neural networks trained by back propagation are used to find out the relationship between several component reliability (input) and system reliability (output) of structural system. The inverse problem can be formulated by using neural network. One of the neural network training algorithms, the back propagation algorithm, can attain stable and quick convergence during training process. Genetic algorithm is used to find the minimum square error.