• 대한전자공학회논문지TC
• /
• 제43권9호
• /
• pp.88-98
• /
• 2006

VANET은 MANET과 달리 노드의 고속 이동성, 노드 밀도, 네트워크 토폴로지의 빈번한 변화와 같은 차량 환경 고유의 특징을 가진다. 이러한 특징들은 MANET의 네트워크 토폴로지 기반 프로토콜을 VANET에 적용할 수 없는 주요 원인이 된다. 본 논문에서는 영역 기반 릴레이 노드 선택 알고리즘을 사용한 긴급경고메시지 브로드캐스팅 프로토콜을 제안하였다. 영역 기반 릴레이 노드 선택 알고리즘은 긴급 경고 메시지를 전달하는 릴레이 노드가 통신 영역의 가장 자리에 위치하지 않더라도 최적의 전달 대기 시간을 부여함으로써 종단간 메시지 전달 지연 시간을 최소화 할 수 있다. 또한, 긴급경고메시지 브로드캐스팅을 위한 제어 메시지 교환이 필요 없기 때문에 낮은 네트워크 부하를 가진다. 제안한 알고리즘은 낮은 노드 밀도와 짧은 전송 거리의 VANET 환경에서도 종단간 메시지 전달 지연 시간을 줄여 줄 수 있다.

• 약학회지
• /
• 제49권6호
• /
• pp.495-504
• /
• 2005

In our study, osteoporosis was induced by ovariectomized in female Sprague-Daweley rats, and the prevention and treatment efficacy of the climacteric disease the postmenopausal Type I pattern was examined by using the experimental substance soybeans and arrowroot. After ovariectomy; the amount of estrogen was found to be reduced by 21.37$\%$ and it showed the tendency to be increased by 4.49$\%$ in T1 (extraction of soybeans group) and 7.62$\%$ in T2 (extraction of ferment soybeans group). The change of bone density, 14 weeks after ovariectomy in the femur, was decreased by 9.33$\%$ in N.C. group, and 5.46$\%$ in T3 (extraction of ferment arrowroot group). As pathological findings, the trabeculae of femur were detected to be abundant as normal and the frequency of the appearance of osteoclasts was very minimal. In the T3, the frequency of the appearance of the trabeculae of femur was increased to the level that could be distinguished. In regard to the accumulation of lipid in the bone marrow, the accumulation of lipid in the bone marrow was low as normal. However, in T3, the decrease to the level that could be distinguished was detected. In addition, in regard to the pathological findings of the uterus, normal uterine tissue findings were detected. In the T3, the minimal atrophy findings were detected. In conclusion, when the T3 was orally administered continuously for 14 weeks, it was thought that a certain proportion of the hormonal balance was maintained that functioned as a substance interfering the accumulation of fat, and it was considered to be of help in the treatment of not only osteoporosis Type I, but also for the prevention and treatment of various endocrinal diseases.

• Journal of Microbiology and Biotechnology
• /
• 제22권12호
• /
• pp.1653-1658
• /
• 2012

We have reported previously that a recombinant Escherichia coli co-expresses aminolevulinic acid (ALA) synthase, an NADP-dependent malic enzyme, and a dicarboxylate transporter-produced heme, an iron-chelated porphyrin, in a succinate-containing complex medium. To develop an industrially plausible process, a chemically defined medium was formulated based on M9 minimal medium. Heme synthesis was enhanced by adding sodium bicarbonate, which strengthened the C4 metabolism required for the precursor metabolite, although a pH change discouraged cell growth. Increasing the medium pH buffering capacity (100mM phosphate buffer) and adding sodium bicarbonate enabled the recombinant E. coli to produce heme at rates 60% greater than those in M9 minimal medium. Adding growth factors (1 mg/l thiamin, 0.01 mg/l biotin, 5 mg/l nicotinic acid, 1 mg/l pantothenic acid, and 1.4 mg/l cobalamin) also induced positive heme production effects at levels twice of heme production in M9-based medium. Porphyrin derivatives and heme were found in the chemically defined medium, and their presence was confirmed by liquid chromatography/mass spectroscopy (LC/MS). The formulated medium allowed for the production of $0.6{\mu}M$ heme, $29{\mu}M$ ALA, $0.07{\mu}M$ coproporphyrin I, $0.21{\mu}M$ coproporphyrin III, and $0.23{\mu}M$ uroporphyrin in a 3 L pH-controlled culture.

• 한국식품위생안전성학회지
• /
• 제19권1호
• /
• pp.25-30
• /
• 2004

숙주나물과 콩나물은 blanching후 변질 속도가 크게 차이가 나는 바 이들이 Bacillus subtilis, Bacillus cereus, Pseudomonas fluorescens, Listeria monocytogenes등 4종의 부패성 및 식중독 미생물의 증식에 미치는 영향을 조사하였다. 숙주나물과 콩나물의 조리과정 중 blanching조건이 달라 각각의 조건에서 두 시료 모두 blanching하여 생균수를 측정한 결과 blanching 한 후 미생물 수는 저장시간에 따라 증가하나 그 차이가 없었다. 최소배지에 숙주나물과 콩나물 농축물 및 부패성 미생물을 접종한 후 생균수를 측정한 결과 숙주나물에 접종한 모든 균들의 초기 균수가 높았으나 24시간 이후 비슷한 증식양상을 나타내었다. 그러나 숙주나물과 콩나물의 여액을 배지로 사용하여 실험한 결과 미생물의 증식 양상은 균주 마다 다른 것으로 나타났다. 저장기간 동안 색도를 측정한 결과 숙주나물의 경우 24시간에는 색차가 거의 없다가 48시간 이후 현저한 차이를 보였고, 콩나물의 경우 24시간에 다른 계통의 색으로 변하다가 48시간 이후 현저하게 많은 차이를 보여 다른 양상을 나타내었다.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2327-2335
• /
• 2018

Fluid catalytic cracking (FCC) is an important chemical process that is widely used to produce valuable petrochemical products by cracking heavier components. However, many difficulties exist in modeling the FCC process due to its complexity. In this study, a dynamic process model of a FCC process is suggested and its structural observability is analyzed. In the process modeling, yield function for the kinetic model of the riser reactor was applied to explain the product distribution. Hydrodynamics, mass balance and energy balance equations of the riser reactor and the regenerator were used to complete the modeling. The process model was tested in steady-state simulation and dynamic simulation, which gives dynamic responses to the change of process variables. The result was compared with the measured data from operating plaint. In the structural analysis, the system was analyzed using the process model and the process design to identify the structural observability of the system. The reactor and regenerator unit in the system were divided into six nodes based on their functions and modeling relationship equations were built based on nodes and edges of the directed graph of the system. Output-set assignment algorithm was demonstrated on the occurrence matrix to find observable nodes and variables. Optimal locations for minimal addition of measurements could be found by completing the whole output-set assignment algorithm of the system. The result of this study can help predict the state more accurately and improve observability of a complex chemical process with minimal cost.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.27.1-27.9
• /
• 2020

Background: Mandibular setback surgery can change the position of the mandible which improves occlusion and facial profile. Surgical movement of the mandible affects the base of the tongue, hyoid bone, and associated tissues, resulting in changes in the pharyngeal airway space. The aim of this study was to analyze the 3-dimensional (3D) changes in the hyoid bone and tongue positions and oropharyngeal airway space after mandibular setback surgery. Methods: A total of 30 pairs of cone-beam computed tomography (CBCT) images taken before and 1 month after surgery were analyzed by measuring changes in the hyoid bone and tongue positions and oropharyngeal airway space. The CBCT images were reoriented using InVivo 5.3 software (Anatomage, San Jose, USA) and landmarks were assigned to establish coordinates in a three-dimensional plane. The mean age of the patients was 21.7 years and the mean amount of mandibular setback was 5.94 mm measured from the B-point. Results: The hyoid bone showed significant posterior and inferior displacement (P < 0.001, P < 0.001, respectively). Significant superior and posterior movements of the tongue were observed (P < 0.05, P < 0.05, respectively). Regarding the velopharyngeal and glossopharyngeal spaces, there were significant reductions in the volume and minimal cross-sectional area (P < 0.001). The anteroposterior and transverse widths of the minimal cross-sectional area were decreased (P < 0.001, P < 0.001, respectively). In addition, the amount of mandibular setback positively correlated with the amount of posterior and inferior movement of the hyoid bone (P < 0.05, P < 0.05, respectively). Conclusion: There were significant changes in the hyoid bone, tongue, and airway space after mandibular setback surgery.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.332-342
• /
• 2010

A model has been developed to investigate in-river sediment and phosphorus dynamics. This advective-dispersive model is coupled with hydrodynamics and sediment transport submodels to simulate suspended sediment, total dissolved phosphorus, total phosphorus, and particulate phosphorus concentrations under unsteady flow conditions. It emphasizes sediment and phosphorus dynamics in unsteady flow conditions, in which the study differs from many previous solute transport studies, conducted in relatively steady flow conditions. The diffusion wave approaximation was employed for unsteady flow simulations. The first-order adsorption and linear adsorption isotherm model was used on the basis of the three-layered riverbed submodel with riverbed sediment exchange and erosion/deposition processes. Various numerical methods were tested to select a method that had minimal numerical dispersion under unsteady flow conditions. The responses of the model to the change of model parameter values were tested as well.

• 품질경영학회지
• /
• 제18권2호
• /
• pp.25-32
• /
• 1990

This paper presents an approximate algorithm for computing Fault-tree probabilities. The method is essentially composed of three steps. In the first step, a Fault-tree is converted into a network form. In the second step, We change the network into a parallelized diagram. In the third step, the approximate fault-tree probability is calculated from the parallelized diagram. In this paper, in order to verify the method two hypothetical Fault-tree is used by examples. The results show that the method is very useful, even though it is an approximate technique, since it needs not to search the minimal cut sets and has the simple computing rontines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.601-605
• /
• 2007

This paper describes the experimental method to monitor the structural integrity. The crack on structures changes the wave propagation characteristics of structures. To monitor this change, frequency dependent variation of dynamic stiffness of beam structures is obtained by using beam transfer function method, and its trends are compared to undamaged one for identifying the location and size of the crack. Piezoelectric actuators were used to generate flexural vibrations. It eliminated various restrictions of continuously measuring wave propagation characteristics and monitoring structural integrity. The structural integrity was identified with minimal number of measurements and smart structures employing PZT actuations.