• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.53-58
• /
• 2004

A Miniature inertance pulse tube refrigerator was designed and tested with a 10 W compressor. Erperiments were carried out for different pulse tube length and inertance tube length. An adiabatic model which considered the pressure drop in the regenerator was used to analyze the performance of the pulse tube refrigerator. Among various design parameters which should be optimized, the pulse tube length and the inertance tube length were optimized. PdV work and several different loss mechanism were included in the analysis to simulate more accurately the physical phenomena in the pulse tube refrigerator. Nevertheless, the simulation program could not completely predict the porformance of the refrigerator. The possible reason for the difference of the optimal point between the simulation and the experiment was explained.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.151-161
• /
• 2003

In this study, an interpretation method is proposed to evaluate the stress conditions, including individual excess pore pressure components ($\Delta{u}_{oct}$/ and $\Delta{u}_{shear}$), of normally consolidated clay elements adjacent to the cone face. It is assumed that the stress path of triaxial compression is representative f3r that of the soil element and the soil is elastic-perfectly plastic material. The proposed method is applied to the results of miniature piezocone tests conducted at Louisiana State University calibration chamber system. Based on the results of interpretation, it was found that the ratio of $\Delta{u}_{oct}$/ $\Delta{u}$and $\Delta{u}_{shear}$/$\Delta{u}$ estimated by the proposed method is affected only by the pore pressure parameter. The proposed method gives consistent and reliable values of $\Delta{u}_{oct}$/ $\Delta{u}$and $\Delta{u}_{shear}$/$\Delta{u}$ compared with early works, whereas those obtained by other solutions are significantly dependent on the accuracy in estimating soil properties such as undrained shear strength and rigidity index.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.507-510
• /
• 2005

Euro form which constructs the present RC structures is used widely by the form method of construction of a wall type structure had much consumption of the human power and equipments by the assembly and the demolition, and the complement was required according to demerit with much leakage of cement paste by the form joint, so it developed the new pillar type form system. On the study, in order to consider the modification characteristic by lateral pressure which does the influence most important for the new developed pillar type form system performance, research of a paper manufactured a miniature wall form model, and advanced performance evaluation focusing on lateral pressure. Moreover, lateral pressure evaluation of a new style system was actually gone on through the on-site experiment about a part of wall type srutcture spot for a model experiment and its result on the foundation which is the purpose in evaluating on-site application possibility propriety at the foundation time of wall type concrete structure construction of a pillar type form system.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2621-2624
• /
• 2008

The study on the measurement method of the aerodynamic performance of a turbo compressor was conducted. It is well known that the performance and the efficiency of the compressor can be calculated from the temperature and pressure distribution in each stage of the compressor. In the past Pitot tubes and thermocouples were used to measure pressure and temperature respectively, and recently pressure and temperature rake is used in order to decrease the measuring time and the number of measurement. The miniature total pressure rake which is available in the compressor with a small axial gap is designed and is under development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.111-112
• /
• 2020

As buildings in South Korea become more skyscrapers, the risk of fire is also emerging. Thus, regulations, regulations, and guidelines are being improved to prevent the spread of smoke in the event of a fire in high-rise buildings, but research on smoke flow and pressure distribution in vertical spaces is insufficient. Therefore, in this study, the temperature of each floor in the vertical space according to the size of the fire is measured through the miniature model experiment, and the pressure difference is calculated to establish the basic data for the improvement of the performance of domestic air supply facilities in the future. Thus, a scale model of one-sixth the size of the actual building was produced to measure the temperature, and the pressure difference was derived by substituting the value for the expression. The pressure difference varies depending on the size of the cause of the fire, and it is believed that the differential pressure and conditions of the building should be taken into account before calculating the supply volume for the analysis of the pressure difference according to the size of the cause of the fire in the event of fire.

• Journal of Embryo Transfer
• /
• v.27 no.2
• /
• pp.107-111
• /
• 2012

Miniature pig sperm cryopreservation is continually researched in biotechnology for breed conservation and reproduction. It is important to control the temperature at each stage of cryopreservation and cryoprotectant. It is also necessary to find the optimal cryoprotectant concentration and chemical elements of the extender. Recently, many studies have used various cryoprotectant materials, such as dimethyl sulphoxide (DMSO), ethylene glycol (EG), antifreeze protein (AFP), amides, and glycerol. Glycerol is a commonly used cryoprotectant. However, glycerol has critical cytotoxic properties, including osmotic pressure and it can cause irreversible damage to live cells. Therefore, We focused on membrane fluidity modifications can reduce cell damage from freezing and thawing procedures and evaluated on the positive effects of trehalose to the viability, chromatin integrity, and motility of boar sperm. Miniature pig sperm was separated from semen by washing with modified- Modena B (mMB) extender. After centrifugation, the pellet was diluted with the prepared first extender. This experiment was designed to compare the effects that sperm cryopreservation using two different extenders has on sperm chromatin. The control group used the glycerol only and it was compared with the glycerol and glycerol plus trehalose extender. Sperm viability and motility were evaluated using WST1 assays and computer-assisted semen assays (CASA). Chromatin structure was examined using acridine orange staining. For the motility descriptors, trehalose caused a significant (p<0.01) increase in total motility ($57.80{\pm}4.60%$ in glycerol vs. $75.50{\pm}6.14%$ in glycerol + trehalose) and progressive ($51.20{\pm}5.45%$ in glycerol vs. $70.74{\pm}8.06%$ in glycerol + trehalose). A significant (p<0.05) increase in VAP ($42.70{\pm}5.73{\mu}m/s$ vs. $59.65{\pm}9.47{\mu}m/s$), VSL ($23.06{\pm}3.27{\mu}m/s$ vs. $34.60{\pm}6.58{\mu}m/s$), VCL ($75.36{\pm}11.36{\mu}m/s$ vs. $99.55{\pm}12.91{\mu}m/s$), STR ($54.4{\pm}2.19%$ vs. $58.0{\pm}1.63%$), and LIN ($32.2{\pm}2.05%$ vs. $36.0{\pm}2.45%$) were also detected, respectively. The sperm DNA fragmentation index was 48.8% to glycerol only and 30.6% to glycerol plus trehalose. Trehalose added group showed higher percentages of sperm motility, stability of chromatin structure than glycerol only. In this study, we suggest that trehalose is effective in reducing freezing damage to miniature pig sperm and can reduce chromatin damage during cryopreservation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.181.3-181
• /
• 2001

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials. the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultrasmall size. In this paper, to do research for medical artificial organs as well as principal parts living body thin film application, electrical properties of L-$\alpha$-DLPC Langmuir(L) films were investigated a displacement current measuring technique with pressure stimulation. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of L-$\alpha$-DLPC deposited by LB method ...

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1728-1738
• /
• 2001

Measurements have been made in an automotive HVAC b1ower for two different centrifugal fans. This work is directed at improving the performance of a conventional forward-curved centrifugal fan for a given small blower casing. Mean velocities and pressure have been measured using a miniature five-hole probe and a pressure scanning unit connected to an online data acquisition system. First, we obtained the fan performance versus flow rates showing a significant attenuation of unstable nature achieved with the new fan rotor in the surging operation range. Second, aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage for different fan operating conditions. The measurements stowed that performance coefficients are strongly influenced by flow characteristics at the throat region. The main flow features ware common in both fans, but improved performance is achieved with tole new fan rotor, particularly in lower flow rate legions. Based on the measured results, design improvements were carried out in an acceptable operation range, which gave considerable insight into what features of flow behavior ware most important.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.477-482
• /
• 2006

In this study, a micro vapor compressor has been designed, fabricated and tested. The micro vapor compressor was made of silicon substrates and fabricated by micromachining process. The compressor is driven by a piezoelectric actuator which is widely used in microfluidic systems because of its strong force and rapid response. The actuator is a bimorph structure which consists of a silicon membrane and a piezoelectric ceramic film. A simulation work was conducted on the performance characteristics of the compressor. The simulation investigated the flow rate variation under various back pressure conditions. Experimental works were carried out on the operation of a compressor and the test results were compared with the simulation results.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.55-59
• /
• 2009

Miniature Joule-Thomson refrigerators have been widely used for rapid cooling of infrared detectors, probes of cryosurgery, thermal cameras, missile homing head and guidance system, due to their special features of simple configuration, compact structure and rapid cool-down characteristics. The thermodynamic performance of J-T refrigerator highly depends on the hydraulic and heat transfer characteristics of the recuperative heat exchanger. The typical recuperative heat exchanger of the J-T refrigerator has the double helical tube and fin configuration. In this study, effectiveness-NTU approach was adopted to predict the thermodynamic behaviors of the heat exchanger for the J-T refrigerator. The thermodynamic properties from the REFPROP were used to account the real gas effects of the gas. The results show the effect of the operating conditions on the performance of the heat exchanger and refrigerator for the given heat exchanger. The influences of mass flow rate and the supply pressure on the effectiveness of heat exchanger and the ideal cooling capacity are discussed in details.