• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.751-755
• /
• 2007

The purpose of this study is to find the optimization processing on expanded tube using Taguchi method which was generally used to analyze the effects of various control factors. Mini-Tab is a good for program that is making a selection using Taguchi method. The results of experimental test and analysis are as follows. Optimization processing on a expanded tube is dependent on lubrication condition. The slight eccentricity of expanded tube was obtained a good results on the expanded tube. When expending processing on the expanded tube was performed, the test specimens were almost unaffected by changing pressure loading. The tendencies of test results were related to lubrication condition and eccentricity in expending processing. As a result, a proper lubrication condition and eccentricity in the step of design will improve the optimization processing of expanded tube.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.582-588
• /
• 2010

This paper presents the Application of Response Surface Method for Optimal Transfer Conditions of MLCC Alignment System. his paper is composed of two parts: (1) Testing performance verification of MLCC alignment system, compared with manual operation; (2) Applying response surface method to figuring out the optimal transfer conditions of MLCC transfer system. Based on the successfully developed MLCC alignment system, the optimal transfer conditions have been explored by using RSM. The simulations using $ADAMS^{(R)}$ has been performed according to the cube model of CCD. By using $MiniTAB^{(R)}$, we have established the model of response surface based on the simulation results. The optimal conditions resulted from the response optimization tool of $MiniTAB^{(R)}$ has been verified by being assigned to the prototype of MLCC alignment system.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.84-89
• /
• 2009

In this study, the fire extinguishing experiment was performed using a water mist nozzle with variation of factors which affect on the extinguishing time. The variables were distance from nozzle center to fire location, droplet size, height of nozzle and opening or not. With the experimental data, interaction and sensitivity between factors were analysed with Mini tab and deduce a optimum model of fire extinguishing of water mist system. Based on the experiment and modeling of fire extinguishing with water mist system, the most important factor on extinguishing time is the distance from the center of nozzle to fire and the opening effect was small compare with other factors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.605-606
• /
• 2007

• Communications for Statistical Applications and Methods
• /
• v.7 no.1
• /
• pp.179-198
• /
• 2000

We consider the problem of comparing the mean vectors of two multivaiate populations, We focus on testing hypotheses concerning two multivariate mean vectors by use of MINITAB, For the cases of small sample and large sample MINITAB programs and outputs are presented for solving staistical problems. The MiniTAB programs made in this paper are saved as macro files and thus can be conveniently used for solving another problems.

• Journal of the military operations research society of Korea
• /
• v.37 no.1
• /
• pp.39-48
• /
• 2011

To predict the shelf-life of ammunition stockpiled in intermediate have practical meaning as a core value of combat support. This research is to Predict the shelf-life of ammunition by applying time series analysis based on report from ASRP of the 155mm, KD541 performed for 6 years. This study applied time series analysis using 'Mini-tab program' to measure the amount of stabilizer as time passes by is different from the other one that uses regression analysis. The average shelf-life of KD541 drawn by time series analysis was 43 years and the lowest shelf-life assessed on the 95% confidence level was 35 years.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.983-991
• /
• 2021

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.

• Journal of Korean Physical Therapy Science
• /
• v.5 no.4
• /
• pp.795-807
• /
• 1998

The purpose of this study was to investigate the effects of exercise therapy to oldwomen's muscle strength, flexibility and IADL. To identify the effect of exercise therapy on oldwomen's muscle strength, flexibility and IADL, this study attempted to determine grip strength, back strength, leg strength, flexibility of upper and low(flexion, extension, abduction), flexibility of trunk(flexion, extension) and IADL, using dynamometer, goniometer and Geriatric center IADL, for 34 female. Thirty-four subjects participating in this study consisted of A group(from sixty-five to sixty-nine, eleven person), B group(from seventy to seventy-four, twelve person), C group(over seventy-five years old, eleven person). Data from the findings of this experiment were computed for and standard deviation by using repeated measurement of MINI TAB. As a result, the following conclusion was drawn : 1. Subject group showed significantly higher scores on effect of exercise between three age group after regular exercise. 2. Subject group showed significantly higher scores on muscle strength(grip strength, back strength, leg strength) and there is a difference between three age group after regular exercise of muscle strength. 3. Subject group showed significantly higher scores on flexibility (upper, lower, trunk) and there is a difference between three age group after regular exercise of flexibility. 4. Subject group showed significantly higher scores on IADL(Instrumental activities of daily living) and there is a difference between three age group after regular exercise. As a result of this study, the effect of exercise training program had improved muscle strength, ROM (range of motion) of joint, IADL. Thus exercise training program could be beneficially applied for the prevention of disability and promotion of health and wellbeing in the aged easily and safely.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.414-419
• /
• 2016

A study of a precision test according to the control method of an injection molding machine was carried out. The effects of the screw stroke, holding pressure, melt temperature on both the hydraulic and electric injection molding machine were examined. In addition, hypothesis testing was performed to determine the deviation of the data obtained in the experiments. The conclusions obtained in this study were as follows. Significant deviations in the screw stroke, melt temperature and holding pressure occurred in that order. The hydraulic type showed significantly more variation between the products compared to the electric type. In addition, using a mini tab from the statistics program, a hypothesis was proposed and the P value of the injection stroke, holding pressure, melting temperature injection stroke and melting temperature had adopted a null hypothesis ($H_0$). The holding pressure, which showed mutual differences, adopted an alternative hypothesis ($H_1$).