Clinopyroxene in the Geodo mine belongs to diopside-hedenbergite series. It is widely distributed throughout the mine area together with garnet and is also closely related with Fe-mineralization. Clinopyroxenes in the Geodo mine including two samples from the sangdong and Ulchin Mines are studied using polarized microscope, EPMA, XRD, and IR spectroscopy for occurrence, chemistry, structure, and crystal chemistry. Especially, variations in unit-cell parameters are examined in relation with the substitution scheme between Fe and Mg cations. Clinopyroxenes in the Geodo mine occur in both endoskarn and exoskarn zone. It is mostly anhedral to subhedral with fine- to medium-grained in texture, but some have bigger crystals of short prismatic or columnar habits. Clinopyroxene occurs as monomineralic or is associated with mostly garnet and sometimes with actinolite, magnetite, epidote, and chlorite. Chemical analysis reveals that the Geodo clinopyroxene is diopsidic in composition (Di: 65-96%). This fact is in good contrast with garnet chemistry showing mostly andraditic (An: 41-82%). Especially, clinopyroxene coexisting with magnetite belongs to nearly end member diopside (Di: 97-99%). Thus, diopside-andradite pair indicates that Geodo skarns were formed under the reduced environment. X-ray diffraction analysis shows unit-cell parameters vary with increase of Fe contents: a = 9.765-9.838$\AA$, b = 8.943-9.020$\AA$, c= 5.240-5.253$\AA$.$\beta$ = 105.70-104.83$^{\circ}$, and V =440.64-448.19$\AA$3. It is noted from the least square regression that a, b and V increase linearly with increase of Fe content, while $\beta$ slightly decreases and c remains nearly unchanged as change in Fe content. These trends are to difference between synthetic and natural clinopyroxenes. This fact is also recognized in IR spectra which show a slight shift of several absorption bands toward lower wavenumber region with increasing Fe content.
Regional geology of Chungil mine is composed of Cretaceous biotite granite. Chungil ore deposits are fissure filled quartz veins which developed in Cretaceous biotite granites. Mineralogic and fluid inclusion studies were undertaken to illuminate the origin of the ore deposits. Data gathered from occurrences of ore deposits and mineral paragenesis reveals that there were two major mineralization stage. The first stage is sulfides-quartz stage. The constituents of ore minerals are chalcopyrite, sphalerite, pyrrhotite with minor amount of galena, native Au, Ag, pyrite. The second stage is gangue mineral stage. Gangue minerals are quartz, fluorite and calcite. Homogenization temperature of fluid inclusions in quartz of the first and the second stage ranges from $212^{\circ}C$ to $336^{\circ}C$ and from $154^{\circ}C$ to $355^{\circ}C$ respectively. Homogenization temperature in fluorite and calcite of the second stage ranges from $127^{\circ}C$ to $252^{\circ}C$ and from $129^{\circ}C$ to $158^{\circ}C$ but these data require positive pressure corrections. Fluid inclusions in quartz of the Bongmyeong mine, Jangja the first mine and the second mine show range of homogenization temperature from $178^{\circ}C$ to $330^{\circ}C$, from $185^{\circ}C$ to $354^{\circ}C$ and from $206^{\circ}C$ to 336 respectively. The comparison of the fluid inclusion data, mineralogical component and vein attitude of the three mines with that of Chungil mine indicates that the origin of the deposits above mentioned is elucidated to be formed under similar environment. The compositions of the sphalerite in the first stage range from 16.05 mol.% FeS to 20.36 mol.% FeS.
Lee, Chang Shin;Kim, Yong Jun;Park, Cheon Young;Lee, Chang Ju
Economic and Environmental Geology
/
v.25
no.1
/
pp.51-60
/
1992
The pluton rocks in Kwangyang-Seungju area consist of two mica granite, hornblende diorite, Rimunri quartz diorite, grnodiorite porphyry and granophyre. The analysis of the geochronological data by the methods of K-Ar for the hornblende from Rimunri quartz diorite and hornblende diorite show that the ages are found to be $86{\pm}3.3$ Ma and $108{\pm}4$ Ma, respectively, and K-Ar age for chlorite from the altered two mica granite which intruded by the hornblende diorite of the Bonjeong mine shows $108{\pm}4$ Ma; K-Ar age for sericite from the greisenized hornblende diorite, which is closely associated with the Bonjeong ore deposits, is dated as $94.2{\pm}2.4$ Ma. They correspond to the igneous activity of the Bulgugsa Disturbance periods in the area. In chemical feature for oxides versus silica and AFM triagular diagrams of the pluton rocks in the study area, there is a suggestion of the possibility that these rock facies area a Calc-alkali series of differentiated products by low-pressure crystal fractionation processes in $SiO_2$-undersaturated suites. Compared with hornblende diorite, andesite and granodiorite porphyry, two mica granite, Rimunri quartz diorite and granophyre exhibit a wider range of normalized REE abundance and negative Eu anomalies. Such anomalies imply more extensive feldspar fractionation during crystallization. The Rimunri quartz diorite and hornblende diorite occurring in the margin of four mines(Bonjeong, Okdong, Soungchei and Saungyeul) of this area have high contents of As, Sb, Cu and Zn which have been shown as the best indicators in hypogene gold deposits and low contents of Ba, Cr served as more sensitive indicators. And the granitoids are regarded as the rocks associated with gold and sulfide mineralization of the area.
Mineral assemblages, mineral chemistries and stable isotope compositions of altered rocks of the Ogmae, Seongsan, Haenam and Gusi mines near the Haenam volcanic field in the southwestern part of the Korea peninsula were studied. Characteristic hydrothermal alteration zones in these deposits occurring in the Cretaceous volcanics and volcanogenic sediments, acidic tuff, and rhyolite, were outlined. Genetic environment with particular reference to the spatial and temporal relationships for these deposits were considered. The alteration zones defined by a mineral assemblage in the Ogmae and Seongsan deposits can be classified as alunite, pyrophyllite, kaolinite or dickite, quartz, illite or illite/smectite. Alunite was not developed in the Gusi and Haenam deposits. Boundaries between the adjacent zones are always gradational except for vein-type alunite. Alteration zones are superimposed upon each other in some localities. These deposits formed $71.8{\pm}2.8{\sim}76.6{\pm}2.9$ Ma ago, which is the almost same age of later volcanic rocks $79.4{\pm}1.7{\sim}82.8{\pm}1.2$ Ma, the Haenam Group, corresponding to Campanian. It indicates that hydrothermal alteration of these deposits appeared to be related to felsic volcanism in the area. Consideration of the stability between kaolinite, alunite, pyrite and pyrophyllite, and the geothermometry based on the mineral chemistry of illite and chlorite suggests that the maximum formation temperature for alunite and pyrophyllite can be estimated at about $250^{\circ}C$ and $240{\sim}290^{\circ}C$, respectively. It also suggests that these deposits were formed by acidic sulfate solution with high aqueous silica and potassium activity in a shallow depth environment. Compositional variation of alunite also suggests that the physico-chemical conditions fluctulated considerably during alteration processes, indicating shallow depth environment. The Haenam deposit was formed at a relatively greater depth than the others. The sulfur isotope composition of alunite and pyrite indicates that sulfur probably had a magmatic source, and the oxygen isotope composition for kaolinite indicates that the magmatic hydrothermal solution was diluted by circulating meteoric water.
Australia is the world's top gold, nickel, iron ore, lead, zinc and uranium, and is ranked in the top five in many other important minerals. Extension to existing resources will continue to support well-established local production. There are perceptions by some that Australia is a mature exploration destination where the easily won near-surface deposits were largely discovered many decades ago. In recent years, Australia faces increasing global competition for investment spending in all jurisdictions in which mineral exploration is encouraged. Many regional communities face the threat of losing their main economic driver as a number of long-term mines are reaching the end of their economic life. However, given the trend of increasing mineral demand due to the 4th industrial revolution, it is considered that Korea is also an opportunity to acquire global competitiveness of geoscience and mining technology by smart and digital mining, and by ICT-convergence technology R&D.
Recently, transition from open pit to underground mining in limestone mines is an increasing trend in Korea due to environmental issues such as noise, dust and vibrations caused by crushers and equipment. The severe damages in the surrounding rock mass of underground opening caused by explosive blasting may lead to rock fall hazards or casualties. It is well known that variables which mainly affect blast-induced rock falls in underground mining are: blast vibration level, joint orientation and distribution and shape of the cross sections of underground structures. In this study, UDEC program, which is a DEM code, is used to simulate blast vibration-induced rock fall in underground openings. Variation of joint space, joint angle and joint normal stiffness was considered to investigate the effect of joint characteristics on the blast vibration-induced rock fall in underground opening. Finally, jointed rock mass models considering blast-induced damage zone were examined to simulate the critical blast vibration value which may cause rock falls in underground opening.
Journal of Korean Society of Coastal and Ocean Engineers
/
v.27
no.3
/
pp.182-189
/
2015
The Embedded Suction Anchor (ESA) is a type of permanent offshore foundation that is installed by a suction pile. To increase the loading capacity against pullout, three wings (vertical flanges) are attached along the circumference at 120 degrees apart. Analytical parametric study using the proposed analytical solution method has been conducted to identify the effects of several parameters that are thought to influence the behavior of ESAs. The analysis results show that the pullout capacity increases as the anchor depth and the soil strength increase, and decreases as the load inclination angle increases. The anchor having square projectional area and being pulled horizontally at the middle of its length provides the highest pullout capacity.
Recently, interests in subsidence hazard have been increased due to the underground construction such as subway construction and managements of abandoned mines. GIS analysis of subsidence hazard has a lot of advantages in handling of spatial data and managing database. For better result of GIS analysis, there are some necessities of modifying previous subsidence theory and model. To take surface profile into account allows the application of complicated topology. Furthermore. for 3-dimensional analysis. two subsidence profile curves that are perpendicular to each other should be considered simultaneously. Through these modifications, the model for subsidence analysis using GIS can be established. With ideal case of cavities and other conditions, GIS analysis was accomplished and meaningful results were produced. More realistic properties of cavity. soil layers, groundwater condition and topology will enable GIS analysis method to produce more reliable result and to widen the area of applications.
The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.
Bit damage is one of the primary causes of decreasing drilling efficacy. Nevertheless the management of bit ware and failure are often left for field engineers' experience. Thus it is imperative to establish a proper system to predict and manage the bit damage during the rock drilling process. In this study, the drilling sound signal has been recorded and analyzed using wavelet transform analysis to identify the exact moment of bit failure. Through the analysis wavelet time-frequency spectrums have been constructed and an abnormal point has been identified with 0.9 of wavelet transform value at the 652.8s on a frequency band around 500Hz. Furthermore it is also observed that the penetration rate of the damaged bit has been decreased to 23mm/s which is 9mm/sec lower than the average of undamaged bit. The study verifies that wavelet transform analysis can be used to build a system to diagnose the bit damage while drilling.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.