• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.538-541
• /
• 2009

Humans have a long history of asbestos use. There are reports from the Roman era, of asbestos victims among the slaves who worked in asbestos mines. The fact that asbestos can induce lung cancer and mesothelioma was verified epidemiologically in the 1960s. Asbestos related diseases are predominantly occupational in nature but can be caused by environmental exposure. Environmental mesothelioma is mainly associated with tremolite asbestos and this information comes from many countries including Turkey, Greece, Corsica, New Caledonia and Cyprus. In 1993, the first case of mesothelioma in Korea was reported in an asbestos textile worker. Recently, some asbestos disease victims who lived near an asbestos factory have their cases before the courts. A series of recent asbestos-related events in Korea, for example, the shocking revelation of asbestos containing talc in baby powders have caused the general public to become aware of the health risks of asbestos exposure. Asbestos related diseases are characterized by a long latency period, especially, mesothelioma which has no threshold of safety. Hence the best strategy for preventing asbestos related diseases is to decrease asbestos exposure levels to as low as possible.

• Structural Engineering and Mechanics
• /
• v.56 no.6
• /
• pp.983-1001
• /
• 2015

This study focuses on the load carrying capacity and the force transfer mechanism of multi-hole perfobond shear connectors in steel-concrete composite structure. The behavior of multi-hole perfobond shear connector is more complicated than single-hole connector cases. 2 groups push-out tests were conducted. Based on the test results, behavior of the connection was analyzed and the failure mechanism was identified. Simplified iterative method and analytic solution were proposed based on force equilibrium for analyzing multi-hole perfobond shear connector performance. Finally, the sensitivity of design parameters of multi-hole perfobond shear connector was investigated. The results of this research showed that shear force distribution curve of multi-hole perfobond shear connector is near catenary. Shear forces distribution were determined by stiffness ratio of steel to concrete member, stiffness ratio of shear connector to steel member, and number of row. Efficiency coefficient was proposed to should be taking into account in different limit state.

• Computers and Concrete
• /
• v.22 no.2
• /
• pp.239-248
• /
• 2018

TBM penetration rate is a function of intact rock properties, rock mass conditions and TBM operational parameters. Machine rate of penetrationcan be predicted by knowledge of the ground conditions and its effects on machine performance. The variation of TBM operational parameters such as penetration rate and thrust plays an important role in its performance. This study presents the results of the analysis on the TBM penetration rates in schistose rock types present along the alignment of Golab tunnel based on the analysis of a TBM performance database established for every stroke through different schistose rock types. The results of the analysis are compared to the results of some empirical and theoretical predictive models such as NTH and QTBM. Additional analysis was performed to find the optimum thrust and revolution per minute values for different schistose rock types.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2007.10a
• /
• pp.227-230
• /
• 2007

대규모 노천광산의 개발과정에서 배수 및 운반 설계는 매우 중요한 작업 요소이며, 그 결과에 따라 채광 효율성과 광산 운영비용이 크게 달라질 수 있다. 본 연구에서는GIS를 이용하여 노천광산의 배수 및 운반 시스템을 최적화할 수 있는 새로운 채굴적 설계 방안을 제시하였다. 대부분의 노천광산에서 빈번하게 수행되는 지상 지형측량 결과를 이용하여 수치표고모델을 생성하였고, 수계분석 알고리즘을 적용하여 강우시 노천광산 배수 시스템의 특성을 분석하였다. 또한, 최적경로 분석 알고리즘과 다중 의사결정 기법을 접목하여 폐석 트럭의 최적 운반경로를 분석하고, 트럭 운반 시스템의 효율성을 평가할 수 있는 방법을 제시하였다. 인도네시아 파시르 석탄 노천광산을 대상으로 적용시험을 수행한 결과, 배수 및 운반 설계 과정에서 GIS가 효과적으로 활용될 수 있음을 확인할 수 있었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.77-80
• /
• 2003

Hydrocarbon-hydrocarbon separations are one of the most important processes in petroleum refining. Distillation process has been used for separating hydrocarbons, but this conventional process is very energy consuming. Pervaporation separation through polymeric membranes is an emerging process alternative to distillation because of energy savings, compact system installation, reduced capital investment, and other performance attributes. In hydrocarbon separations, polymeric membranes are easily swollen by hydrocarbons and can lose mechanical strength. Chemically robust membranes are needed for the separation of hydrocarbons. In this study, the blend membrane was applied to separate benzene and cyclohexane. This is a model system for aliphatic and aromatic separation. Cyclohexane is also physically very similar to benzene and as a result of the very closing boiling points (0.6$^{\circ}C$), benzene and cyclohexane form an azetrope. Thus the system provides a good model for azeotrope breaking by pervaporation. The semi-quantitative thermodynamic model predicts that the calculated selectivity increases with increasing Hydrin contents in the blend membranes. Pervaporation experiments utilizing various operating temperatures and feed concentrations with different blend membranes are compared with the result from semi-quantitative thermodynamic calculations.

• Advances in concrete construction
• /
• v.4 no.4
• /
• pp.243-261
• /
• 2016

This research study focuses on utilizing sandstone which is overburden waste rock in coal mines to use in concrete as a replacement of fine aggregate. Physical properties of sandstone like water absorption, moisture content, fineness modulus etc., were found to be similar to conventional fine aggregate. Scanning Electron Microscope (SEM) analysis was carried out for analysing elemental composition of sandstone. There was no sulphur content in sandstone which is a good sign to carry the replacement. Fine aggregate was replaced with sandstone at 25%, 50%, 75% and 100% by volume and moulds of concrete cubes and cylinders were prepared. Compressive strength of concrete cubes was tested after 3, 7 and 28 days and split tensile & flexural strength was determined after 28 days. The strength was found to be increasing marginally with increase in sandstone content. Fine aggregate that was replaced by 100% sandstone gave highest strength among all the replacements for the compressive, split tensile and flexural strengths. Though increase in strength was marginal, still sandstone can be an effective replacement for sand in order to save the natural resource and utilize the waste sandstone.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.221-223
• /
• 2015

해방70년을 맞이하는 차원에서 일제강점기 동안에 조선인 강재징용으로 구축된 진지갱도(신주백, 2003)에 대한 구조물의 분포와 활용에 대한 내역을 규명하고(황석규, 2006), 일제에 의하여 자행된 국토훼손의 실상 및 만행을 확인하여 분류하는데 있다. '한반도는 일제강점기 일본 제국의 군사요새였다'(이완희, 2014)고 제시하였듯이 조사탐사의 범위는 전국을 대상으로 하며, 진지갱도지역에 대한 3-D LiDAR 기법에 의한 도면작성으로 붕괴위험에 처한 진지동굴의 분포, 형상, 내용 등의 분석으로 문화재적 측면의 보전위한 기록물 구현방안에 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1083-1088
• /
• 2013

Detection and classification of undersea mines in shallow waters using active sonar returns is a difficult task due to complexity of underwater environment. Support vector machine(SVM) is a binary classifier that is well known to provide a global optimum solution. In this paper, classification experiments of sonar returns from mine-like objects and non-mine-like objects are carried out using the SVM, and classification performance is analyzed and presented with discussions depending on parameter values of SVM kernel functions.

• Journal of Information Processing Systems
• /
• v.14 no.3
• /
• pp.727-739
• /
• 2018

This study evaluates the viewpoints of user focus incidents using microblog sentiment analysis, which has been actively researched in academia. Most existing works have adopted traditional supervised machine learning methods to analyze emotions in microblogs; however, these approaches may not be suitable in Chinese due to linguistic differences. This paper proposes a new microblog sentiment analysis method that mines associated microblog emotions based on a popular microblog through user-building combined with spectral clustering to analyze microblog content. Experimental results for a public microblog benchmark corpus show that the proposed method can improve identification accuracy and save manually labeled time compared to existing methods.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1064-1066
• /
• 2003

In this paper, ground penetrating radar (GPR), which has the capability to detect non metal and plastic mines, is proposed to detect and discriminate antipersonnel (AP) landmines. The time domain GPR - Impulse radar and frequency domain GPR - SFCW (Stepped Frequency Continuous Wave) radar is utilized for metal and non-metal landmine detection and its performance is investigated. Since signal processing is vital for target reorganization and clutter rejection, we implemented the MUSIC (Multiple Signal Classification) algorithm for the signal processing of SFCW radar data and SAR (Synthetic Aperture Radar) processing method for the signal processing of Impulse radar data.