• 제목/요약/키워드: Mineralogy

검색결과 469건 처리시간 0.025초

가스하이드레이트 형성 과정의 비저항 모니터링 (Electrical Resistivity Monitoring of Gas Hydrate Formation)

  • 이주용;이재형;이대성;이원석;김세준;허대기;김현태
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.186-187
    • /
    • 2008
  • Electrical resistivity in hydrate-bearing sediments is sensitive to porosity, gas hydrate saturation, gas content, pore fluid composition, and temperature, so electrical measurements such as well logs and electromagnetic surveys have been used to explore gas hydrate-bearing formation. The high pressure tomography cell is designed considering the effect of electrode configuration and electrical shielding on tomography measurements and the safety. The evolution of electrical conductivity during $CO_2$ hydrate formation and dissociation reflects the combined effects of concurrent changes that include ionization of dissolved $CO_2$, temperature-dependent ionic mobility, changes in the degree of saturation, ion exclusion, surface conduction, and porosity changes. Measurements during hydrate formation and dissociation require careful analysis to properly interpret signatures, in particular when out-of plane conductivity anomalies prevail.

  • PDF

낙동강 유역 신항만부지 지역 점토 퇴적물의 광물조성과 토질특성의 상관성 (Correlation analysis between Engineering properties and mineralogy of clay sediments in New Busan Port area of the estuary of the Nakdong River)

  • 이선갑;황진연;정성교;김성욱
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.483-490
    • /
    • 2004
  • Nakdong River Plain and its adjoining sea arc unusually covered by very thick soft clay sediments which were caned Pusan clays, sometimes reaching 40-70m. Since early 1990s a large number of geotechnical investigations have been carried out for land reclamation works in the area, including Busan city and its neighboring cities. Nevertheless, geotechnical engineers have paid little attention to studying geological characteristics on the clays, except some researches related to mineralogy, geo-chemistry, benthic foraminiferal fauna etc. The purpose of reserach is the knowledge of the correlation between engineering properties and mineralogy of clay sediments. The correlation analysis carry out multiple regression that have independent variables (Engineering properties) and dependent variables (mineralogy, geochemistry). Engineering properties of clay are correlated with the mineral compositions and geochemical characteristics. The result of the analysis is Wn = -0,6Feldspar + 1.1pH + 0.01TDS + 27.5, Ip = 0.36Clay + 1.44Vermiculite + 0.94clay mineral - 22.118, PI. = 0.005TDS - 0.31Feldspar + 22.43, eo = 0.02Vermiculite - 0.01Quartz + TDS + 0.93, ${\nu}$t = 0.009Quartz - 0.06Conductivity + 1.67, E50 = 1.94Vermicuhte - 0.96Kaohnite -0.53silt + 49.64, SR = -0.25Kaolinite + 1.5pH -2.3Conductivity, Cc = 0.03pH + TDS -0.2, LL = 0.5Clay + 1.3Vermiculite + 5.5Conductivity + 0.8Caly mineral -20.48

  • PDF

고자기학(古磁氣學)연구를 위한 자성광물론(磁性鑛物論) (Magnetic Mineralogy in Palaeomagnetism)

  • 김인수
    • 자원환경지질
    • /
    • 제16권3호
    • /
    • pp.223-243
    • /
    • 1983
  • palaeomagnetism is a major implement to define tectonic provinces and to estimate their past relative position quantitatively. In this sort of investigation it is tacitly assumed that the magnetization of the rocks under study was acquired at the time of their formation. However, because of the possibility of secondary alteration and/or replacement of magnetic minerals, this assumption is not always legitimate. To secure reliable palaeomagnetic data it is therefore fundamental to identify the carrier mineral of magnetization. This paper reviews magnetic mineralogy relevant to palaeomagnetism of terrestrial rocks. Under the heading of each mineral its genesis, crystal structure, magnetic properties, criteria for ore microscopic determination and secondary alteration are summerized. This paper should also be helpful in application of magnetic mineralogy to geothermometry and oxygen barometry in igneous petrology, diagenesis and provenance study in sedimentary petrology, metamorphic temperature determination and genesis study of ore deposits.

  • PDF

Microstructure, mineralogy and physical properties: techniques and application to the Pusan Clay

  • Locat, Jacques;Tanaka, Hiroyuki
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 준설 및 환경매립에 관한 학술세미나
    • /
    • pp.15-31
    • /
    • 1999
  • The Pusan Clay is analyzed hereafter from a point of view of mineralogy and microstructure. Results indicate that the Pusan Clay is basically illitic in nature and that the soil microstructure reveals some characteristics which could be responsible for its brittle behavior as observed from sample disturbance. The overall analysis would tend to consider that the Pusan Clay profile analyzed here shows mechanical properties similar to well structured soils or so-called cemented soils.

  • PDF

2009년 봄철 황사 단일 입자의 광물학 몇 혼합상태 (Single-Particle Mineralogy and Mixing State of Asian Dust, Spring, 2009)

  • 정기영;최호정;권석기
    • 한국광물학회지
    • /
    • 제24권3호
    • /
    • pp.225-234
    • /
    • 2011
  • 2009년 3월 17일 채집된 황사 총시료(TSP)의 개별 입자에 대하여, 고분해 주사전자현미경 및 에너지분산 X선 분광분석을 이용한 광물학적 특성 및 혼합상태 분석을 실시하였다. 황사 입자들 중, 석영, 사장석, K-장석, 각섬석, 흑운모, 백운모, 녹니석, 방해석 등은 비교적 조립질 입자로 산출되며, 이들 입자는 앓은 극미립 일라이트질 점토광물 층으로 피복되어 있다. 극미립 점토광물 입자들은 또한 개별 점토 덩어리를 형성한다. 조립질 방해석 외에 나노섬유 방해석들이 개별적으로 또는 집합체로 큰 입자를 피복하거나 점토광물과 함께 덩어리를 형성한다. 입자의 주 광물에 따라 광물학적 분류를 실시하고 빈도를 구하였다. 이번 TSP의 단일입자 광물학적 특성 및 혼합상태는 기존의 $PM_{10}$ 분석 결과와 거의 차이가 없었다.

부산 녹산-가덕도 지역에 분포하는 점토퇴적물의 광물조성과 공학적 특성에 대한 비교연구

  • 이선갑;황진연;정성교;김성욱;김국락
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.107-111
    • /
    • 2003
  • Estuary of Nakdong river area is composed of unconsolidated sediments including clays that are deposited varying from 40 to 70m thick. The purpose of research is the knowledge of the correlation between engineering properties and mineralogy of clay sediments. The correlation analysis carry out multiple regression that have independent variables (Engineering properties) and dependent variables (mineralogy, geochemistry). Engineering properties of clay are correlated with the mineral compositions and geochemical characteristics. The result of the analysis is Wn=-0.6 Feldspar + 1.1 pH + 0.01 TDS + 27.5, Ip=0.36 Clay + 1.44 Vermiculite + 0.94 clay mineral-22.88, P$_{L}$=0.005 TDS - 0.31 Feldspar + 22.43, e$_{o}$=0.02 Vermiculite - 0.01 Quartz + TDS + 0.93, E$_{50}$=1.94 Vermiculite-0.96 Kaolinite -0.53 silt + 49.64, SR=-0.25 Kaolinite + 1.5 pH - 2.3 Conductivity, CC = 0.03 pH + TDS - 0.2, LL = 0.5 Clay + 1.3 Vermiculite + 5.5 Conductivity + 0.8 Caly mineral-20.4.4.4.4

  • PDF

전산광물학을 이용한 점토광물 내의 수산기 연구 가능성 (Application of Computational Mineralogy to Studies of Hydroxyls in Clay Minerals)

  • 채진웅;권기덕
    • 한국광물학회지
    • /
    • 제27권4호
    • /
    • pp.271-281
    • /
    • 2014
  • 점토광물의 물리화학적 특성에 대한 분자 또는 원자 스케일의 연구 중요성이 강조되고 있다. 그러나 실험만으로는 광물의 미시적 현상을 이해하기 어려운 경우가 많다. 특히 2:1 점토광물 팔면체에 존재하는 수산기(hydroxyl)가 금속 양이온 흡착과정에 큰 역할을 한다는 가정은 X-ray를 이용하는 실험만으로는 명확하게 테스트하기 어렵다. 이번 논문에서는 점토광물 내의 수산기 연구에 대한 전산광물학(computational mineralogy) 이용 가능성에 대하여 조사하였다. 점토광물의 기본구조인 팔면체 층만으로 구성된 광물, 1:1 구조를 갖는 광물, 2:1 구조를 갖는 광물 중 대표적인 이팔면체 및 삼팔면체 층상규산염 광물을 선별하여 구조최적화를 실시하였다. 분자역학적(molecular mechanics) 계산과 양자역학적(quantum mechanical) 계산 모두 실험값의 격자상수(lattice parameters)를 잘 재현할 수 있었다. 그러나, 사면체층과 팔면체의 구조적 뒤틀림(structural distortion) 등 광물 내부구조를 기존 실험결과와 비교했을 때, 양자역학적 계산결과가 분자역학적 방법을 이용한 결과 보다 더 낮은 오차를 보였다. 파이로필라이트(pyrophyllite) 수산기가 (001)면과 이루는 각은, 수산기의 H(proton)과 사면체의 Si 양이온 간의 척력으로 결정되는데, 양자역학적 방법은 약 $25-26^{\circ}$로 예측하였고, 분자역학적 방법은 약 $35^{\circ}$ 정도로 양자역학계산 결과와 무려 $10^{\circ}$의 큰 차이를 보였다. 전산광물학은 점토광물 구조연구에 신뢰성이 매우 높은 연구방법으로 양이온 흡착과정 중 수산기의 역할 규명에 사용될 수 있다.

Influence of gradation on shear strength and volume change behavior of silty sands

  • Monkul, Mehmet Murat
    • Geomechanics and Engineering
    • /
    • 제5권5호
    • /
    • pp.401-417
    • /
    • 2013
  • The results of an experimental program regarding the effects of gradation on shear strength and volume change behavior of silty sands are presented. Consolidated drained direct shear tests were performed on two clean base sands and twelve silty sands obtained by mixing those base sands with two different non-plastic silts at various fines contents (${\leq}$ 25%). Drained shear strengths were observed to be not significantly influenced by either base sand gradation or silt gradation or fines content for the studied range. Increasing fines content has increased the volumetric contraction of specimens at similar void ratio. However, the amount of increase in volumetric contraction of silty sands were found to be affected by silt gradation when other influencing factors such as fines content, base sand gradation and mineralogy were kept the same. Moreover, the amount of increase in volumetric contraction of silty sands were also found to be affected by base sand gradation when other influencing factors such as fines content, silt gradation and mineralogy were kept the same.