• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.187-190
• /
• 1999

We have developed fabrication processes that form a wide-head T-gate with a 0.2 ${\mu}{\textrm}{m}$ gate length using the combination of thickness of each PMMA layer, line doses and development times for applications in millimeter- and micro-waves monolithic integrated circuits. The three-layer resist structure (PMMA/P(MMA-MAA)/PMMA = 1800 $\AA$/5800 A/1900$\AA$), 4nC/cm and over development were used for fabrication of a wide-head T-gate by the conventional double E-beam exposure technology. The experimented results show that the cross sectional area of T-gate fabricated by the proposed method is easily enlarged without additional processes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.182-185
• /
• 2003

Error performance of two modulation schemes of millimeter-wave over fiber (MMoF) system i.e., optical double side band (ODSB) and optical single side band (OSSB) modulations is analyzed under Rician fading. Bit error rates (BER) of two detection techniques i.e., coherent and noncoherent detection are also compared in Rician fading. In aspect of error performance, ODSB modulation scheme has better BER than OSSB modulation scheme has under Rician fading. On the other hand, OSSB modulation scheme is advantageous in case of considering high bandwidth efficiency and small power degradation. Coherent detection technique is proper in Rician fading, because coherent detection provides more SNR gain whether fading is serious or not. Noncoherent detection can be applied when we need a simple receiver structure.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.13-18
• /
• 1998

In this paper, a new type microstrip directional coupler has been designed and a 3dB coupler has been fabricated and measured. The measured and analysed results are agree well each other except difference of 1 dB insertion loss. There are two eigenmodes, e.g. even and odd mode in coupled microstrip lines. By using the difference between these two eigenmodes phase constants, the directional coupler can be designed by adjusting coupling length, which has a desired coupler has a disdvantage that its coupling length is longer than conventional oe, but it may be used as a useful coupler in millimeter wave range. And it has the merit of less discontinuity effects, becuase it is simpler than the other couplers in structure.

• ETRI Journal
• /
• 제31권6호
• /
• pp.741-748
• /
• 2009

We present an analysis of microstrip coupled lines (MCLs) used to improve the stability of a 60 GHz narrowband amplifier. The circuit has a 4-stage structure implementing MCLs instead of metal-insulator-metal (MIM) capacitors for the unconditional stability of the amplifier and yield enhancement. The stability parameter, U, is used to compare the stability of MCLs with that of MIM capacitors. Experimental results show that MCLs are more stable than MIM capacitors with the same capacitances as MCLs because the parasitic parallel resistances of MCLs are lower than those of MIM capacitors. Moreover, the bandwidth of an amplifier using MCLs is narrower than one using MIM capacitors because the parasitic series inductances of MCLs are higher than those of MIM capacitors.

• ETRI Journal
• /
• 제33권5호
• /
• pp.818-821
• /
• 2011

A D-band subharmonically-pumped resistive mixer has been designed, processed, and experimentally tested. The circuit is based on a $180^{\circ}$ power divider structure consisting of a Lange coupler followed by a ${\lambda}$/4 transmission line (at local oscillator (LO) frequency). This monolithic microwave integrated circuit (MMIC) has been realized in coplanar waveguide technology by using an InAlAs/InGaAs-based metamorphic high electron mobility transistor process with 100-nm gate length. The MMIC achieves a measured conversion loss between 12.5 dB and 16 dB in the radio frequency bandwidth from 120 GHz to 150 GHz with 4-dBm LO drive and an intermediate frequency of 100 MHz. The input 1-dB compression point and IIP3 were simulated to be 2 dBm and 13 dBm, respectively.

• ETRI Journal
• /
• 제29권5호
• /
• pp.673-675
• /
• 2007

We present the design and fabrication of a 60 GHz medium power amplifier monolithic microwave integrated circuit with excellent gain-flatness for a 60 GHz radio-over-fiber system. The circuit has a 4-stage structure using microstrip coupled lines instead of metal-insulator-metal capacitors for unconditional stability of the amplifier and yield enhancement. The gains of each stage of the amplifier are modified to provide broadband characteristics of input/output matching for the first and fourth stages and to achieve higher gains for the second and third stages to improve the gain-flatness of the amplifier for wideband.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.1980-1985
• /
• 2010

This paper is about design of optimal structure of slot antenna array antenna with inner waveguide in accordance with the slot model, and fabrication of its prototype sample operating at the frequency of 24 GHz. Results of this work can be employed as a useful tool to develop and diversify slot antenna having superior performance and omni-directivity to that of current antenna. The implemented antenna demonstrates ultra-wideband performance for frequency ranges 24 GHz with the relatively high and flat antenna gain of 18.64dBi and low sidelobe levels. In addition, a $2{\times}8$ antenna array for phased-array systems and mm-wave sensor applications is also presented.

• Journal of Astronomy and Space Sciences
• /
• 제30권4호
• /
• pp.345-353
• /
• 2013

A W-band Orthomode Transducer (OMT) has been developed for Korean VLBI Network (KVN) polarization observation. The OMT design was based on E-plane split-block technique using septum structure. 3-dimensional electromagnetic simulation was fully employed to optimize the performance of the OMT. Measurements of the fabricated OMT show that the return losses for the vertically and horizontally polarized modes are better than -20 dB across 80 ~ 108 GHz and the insertion losses for the both modes are less than 0.47 dB. The cross-polarization level of the OMT is less than -30 dB. The bandwidth of the developed OMT is estimated as around 30%.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1144-1150
• /
• 2011

In this paper, we present methods to improve output flatness of Ultra-wideband(f1~80f1) Frequency Generator (UFG) with variable output function. That include optimal structure and output ripple calibration algorithm to realize good flatness. The UFG was manufactured by our methods, then experiments were performed. The flatness of band 1~3 and band 4 are within ${\pm}2dB$, ${\pm}4dB$ respectively. These results are very excellent in view of ultra-wideband including millimeter wave band. From this results, we can confirm the validity of our methods.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.295-299
• /
• 2022

In this paper, a fast numerical electromagnetic (EM) method based on the transverse wave formulation called-up Advanced Transverse Wave Approach (A-TWA) is presented. An appropriate 5G antenna is designed, simulated and investigated in the context of Millimeter-Wave Wireless Communication Systems. The obtained simulation results are found in good agreement with literature. Such a method can provide for the simulators a great library integrating the most complexly and sensitively geometry elements that can have a huge impact on the applications supported by new wireless technologies.