• 한국군사과학기술학회지
• /
• 제26권3호
• /
• pp.302-312
• /
• 2023

This paper describes the analysis of lightning strike zoning, the indirect lightning data simulation and the protection design for lightning indirect effects of equipment by lightning strike for unmanned aircraft consisting of composite wings. Through the analysis of lightning strike zoning according to the external shape of unmanned aerial vehicles, the structure areas that should be protected during lightning strike is derived, and the protection requirements of lightning indirect effects for flight critical equipments and equipment that must be operated upon lightning strike was derived. Lightning protection levels according to the location of mounting equipment and surrounding structure materials for each equipment was derived, and the protection design of the unmanned aerial vehicle with composite structures was also proposed from direct effect of lightning. Later, the lightning protection technology will be verified by the ground test of lightning direct and indirect effects.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.797-802
• /
• 2013

In this paper, using the mass/CG measurement equipment and the MOI measurement equipment developed in-house, Pitch MOI and Roll MOI of test specimen were measured and measurement uncertainties on MOI were studied. The possible factors of the measurement uncertainty that could affect accuracy of MOI measurement were mass, spring, frequency, and length measurement-related elements. The each combined standard uncertainty of pitch MOI and roll MOI was estimated from the uncertainties of the above various factors.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2020년도 제61차 동계학술대회논문집 28권1호
• /
• pp.273-274
• /
• 2020

본 논문에서는 부가가치가 높은 군용 장비류의 해외정비품을 국내정비로 전환하기 위한 절차 중 최종 성능평가 절차를 제안하였다. 기존의 절차는 해외정비품의 성능시험을 위한 정비능력 개발시 개발된 국산화 시험장비의 유효성 검증을 위한 명확한 절차가 마련되지 않아 소요군 혹은 실무자에 따라 최종성능평가의 기준이 다른 점이 발생하였다. 따라서 본 연구에서는 통일화된 절차를 연구하여 제안하였다. 제안한 이 절차는 통일된 기준 마련을 통해 해외도입 시험장비와 국산화된 시험장비의 상호 같음을 검증하여 해외로 나가는 정비대상품을 국내정비로 전환하였을 때 품질면에서 동일함을 보증하기위한 중요한 수단이 될 것이라 기대한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.416-421
• /
• 2013

In this paper, the design concept of the transport of defense equipment and processes were established. And the transport of large radar equipment design were investigated. Detailed design of moving equipment with reference to the U.S. military standard was performed.Damping system of the moving equipment by using a simulation designed to predict In order to minimize shock and vibration in the vehicle due to the irregular road surface is transmitted through. Analysis of the damping system was verified using the driving test.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2006년도 추계 학술발표회 논문집
• /
• pp.97-112
• /
• 2006

FRACAS(Failure Reporting, Analysis and Corrective Action System) is intended to provide management visibility and control for reliability and maintainability improvement of hardware and associated software by timely and disciplined utilization of failure and maintenance data to generate and implement effective corrective actions to prevent failure recurrence and to simplify or reduce the maintenance tasks. This process applies to acquisition for the design, development, fabrication, test, and operation or military systems, equipment, and associated computer programs. This paper shows the FRACAS development process and developed FRACAS system for a defense equipment.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.227-232
• /
• 2001

IPresented is a small and handy remotely piloted vehicle(RPV) that can be used for military and non-military surveillance operations. The RPV is equipped with an on-board high resolution color camera to transmit the analog video images and on-board electronics to provide real-time flight information to the pilot, thereby enabling him/her to remotely pilot within the range of 5 km radius. This paper describes the RPV system including its design, manufacturing and flight test results which manifest the stability of on-board mission and flight equipment as well as the remote piloting capability. A future plan for necessary improvements identified from the flight tests are also discussed.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.177-187
• /
• 2001

It is important to test and evaluate the variation degree of ship-mounted antenna radiated power with respect to all directions in order to use more effectively antennas that installed on naval ships. The naval ship has various sensors for navigation, communication and electronic warfare, etc. And the performance of these sensors extremely depends on the various characteristics of antenna system to transmit and receive electromagnetic wave. The radiated power pattern of the antenna differs from all aspect angles of the ship because of complex superstructures. It is important to know the weak point(direction) of antenna radiation for appropriate operation. Therefore, the ARP(Antenna Radiation Pattern) of shipboard antennas is measured for the all aspect angles. The results of ARP measurement are utilized as reference for antenna arrangement of newly-built same class warship. This study also describes the development results for the ARP measurement technique, software design and test procedures to measure the radiation pattern of communication equipment antennas using the fixed test site.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.76-83
• /
• 2007

This report presents the test technique using optic thermal sensor for the HERO evaluation of equipment installed EED. The calibration method of EED-thermal sensor assembly is explained by relation between the current in bridge wire and voltage in thermal sensor. And the HERO test and evaluation method is indicated based on MIL-STD-464A and MIL-STD-331C. The safety and reliability levels of EED-thermal sensor assembly are evaluated when exposed in the electromagnetic environment.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1421-1424
• /
• 2013

The electronic equipment which is exposed to high level pulsed radiation is damaged by Upset, Latchup, and Burnout. Those damages come from the instantaneous photocurrent from electron-hole pairs generated in itself. Such damages appear as losses of a power in military weapon system or as a blackout in aerospace equipment and eventually caused in gross loss of national power. In this paper, we have implemented a RDC(Radiation detection and control module) as a part of the radiation protection technology of the electronic equipment or devices from the pulsed gamma radiation. The RDC, which is composed of pulsed gamma-ray detection sensor, signal processors, and pulse generator, is designed to protect the an important electronic circuits from the a pulse radiation. To verify the functionality of the RDC, LM118s, which had damaged by the pulse radiation, were tested. The test results showed that the test sample applied with the RDC was worked well in spite of the irradiation of a pulse radiation. Through the experiments we could confirm that the radiation protection technology implemented with the RDC had the functionality of radiation protection for the electronic devices.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.389-396
• /
• 2020

좋은 품질의 제품을 얻기 위해서는 제품 자체에 대한 품질 적합성 검사 이전에 생산 및 시험 관련 설비에 대한 적절한 검증이 반드시 선행되어야 한다. 다양한 생산 및 시험 관련 설비 중에서도 ATE는 오늘날 자동차산업, 항공·우주산업, 반도체산업과 같은 민간분야 뿐만 아니라, 방위산업의 군수품 생산 및 성능시험에도 활발히 사용되고 있다. 본 논문은 다양한 방법을 활용하여 군용 FM 무전기 세트의 자동시험장비 인 ATS에 대해 체계적으로 설계 적합성 검증을 실시 한 결과를 다루고 있으며, 군수품 ATE에 대한 설계 적합성 검증 절차가 명문화 되어있지 않은 현 시점에 좋은 참고자료가 될 것으로 기대된다.